Changelog

10.0 M057 2021-04-26-01

Improvements

• Improve algorithm when transfering surface parameters from reference part to extract parts. [RM-11256]
• Improve set position behavior when reopening dialogs on multiple monitors. [RM-11252]

Bugfixes

• Issue fixed: Highlighting of components does not work anymore in drawing. [RM-11185]
• Issue fixed: Some menus in Simplified Chinese version EMX 13.0.2.0 are not translated by yet, for example, "Hydraulic Component", "Pneumatic Component", "Fluid Components" and "Remove all Components by Type" under EMX 元件 tab [RM-11297] [SPR-12581939]
• Issue fixed: Udf name is not taken into account in chamfer size rules. [RM-11329]
• Issue fixed: Parameter Designation status is not removed in case definition was changes from YES to NO. [RM-11377]
• Issue fixed in DIN580 screw [RM-11521]
• Issue fixed: Problem with line Up and down pushbutton in case of empty cell values. [RM-11541]
• Issue fixed: Renaming problem in Library assemblies where subcomponents are assembled multiple times. [RM-11553]

10.0 M057 2021-02-09-01

Bugfixes

• Additional fix for: HASCO core retainer plates can not be selected. [RM-10792]

10.0 M056 2021-01-25-01

Enhancements

• Add new and update existing D-M-E Europe locating rings: F1360, F1367, RB, DHR21, R19, R20, R22, R23, R40, R60, R60L, RB60 and RB90
• Add new and update exisitng D-M-E Europe guide components: R01, R02, R03, R03W, R04, R04W, R05, R08, R09, APD, IPWC, IPNH, FBC, FBN, FSC, FSN, FB120, FB140, FW14, GB112, GB113, GB114, GEB, TD, ZH, F1000, F1010, F1020, F1030, F1040, F1100, F1110, F1120, F1121, F1125 F1126, F1127, F1140, F1144, F1145, 1150, F1332, FW1213. [RM-9347] [RM-9346]
• Add new and update existing D-M-E Europe support Pillars: SP, FW28, FW29.
• Add new and update existing D-M-E Europe ejector pins: CHE28, EAH28, ENA05, ENC05, EOA05, EPA05, EPC05, EPD28, ERA05, ERFAQ, EDC, EDH, PCM, FW, FK, S, KS, EAV, F2R and F4R. [RM-10587]
• Add D-M-E Europe knockout components: F1050 and 1515.
• Add MEUSBURGER knockout component: E1515.

Improvements

• Move MEUSBURGER knockout E1514 from screw to knockout category.
• Improve MEUSBURGER ejector package guiding unit with collar E1325
• Improve MEUSBURGER ejector package guiding unit E1330

Bugfixes

• Issued fixed: ssue in Meusburger component E3143_ and E3141_. [RM-10311]
• Issued fixed: Creo Parametric configured with EMX exits prematurely when modifying surface in mold assembly. [RM-10395] [SPR-10621485]
• Issued fixed: Ordernumber of Meusburger F53 plates is not correct. [RM-10541]
• Issued fixed: Dimension error in MEUSBURGER E3119 silder component. [RM-10544]
• Issued fixed: IdentifyTrimSurfaces functionality is not available anymore in Part and Assembly Mode [RM-10579]
• Issued fixed: Invalid Dimension in Meusburger FM90 babyplast guide package. [RM-10602]
• Issued fixed: Do not allow to define a new ejector with existing modelname. [RM-10718]
• Issued fixed: In case different ejector typ is selected and nominal values are not selected the ordernumber is incorrect. [RM-10719]
• Issued fixed: Automatic chamfer creation does not work for patterned components. [RM-10736]
• Issued fixed: Wrong BORE_REF_DIA values in HASCO cooling component Z98. [RM-10789]
• Issued fixed: HASCO core retainer plates can not be selected. [RM-10792]
• Issued fixed: Crash in case floating licenese is released and flexlm version is 11.12 and older. [RM-10848]

10.0 M055 2020-10-23-01

Bugfixes

• Issue fixed: Colors are not applied in Show Waterline

10.0 M054 2020-10-06-01

Bugfixes

• Issue fixed: For DME inch Moldbases the groove feature still toggles direction in case of a plate size change [RM-10391]

10.0 M054 2020-09-25-01

Enhancements

• Implement command to calculate outline for all models in assembly and update &size parameter [RM-10255]
• Highlight all changed size values in BOM in case all models size are recalculated. [RM-10291]
• Introduce Button in BOM to calculate size for selected models on right mouse button. [RM-10292]
• Add default parameter value &drw_exists to write drawing existing status to models. [RM-10296]
• Implement button on right BOM mouse menu to reset changed size to current parameter value. [RM-10301]

Bugfixes

• Issue fixed: Crash when updating patterns in mold bases with assembly cuts. [RM-10275]
• Issue fixed: When modifying library assemblies which are created by component editor part names rules of sub components are incorrect. [RM-10276]
• Issue fixed: Regression in BOM_BALLOON_CUSTOM_PARAM. Part parameter of type string can not be written. [RM-10287]

10.0 M053 2020-08-27-01

Bugfixes

• Issue fixed: EMX Command Pneumatic components not avavilable in ribbon.

10.0 M053 2020-08-25-01

Enhancements

• New EMX Commands for Hydraulic and Pneumatic components. [RM-5448]
• New dialog to delete all components of selected type. [RM-6079]
• IGES, STEP, DXF export in BOM Dialog works with Windchill and active workspace. [RM-7497]
• Introduce new Option SOLID_TOLERANCE_STANDARD to allow user to specify the solid tolerance mode. [RM-7901]
• Add Options to automatically created chamfers in UDFs for all kinds of components. [RM-8991]
• Implement command to transfer surface parameter from reference parts to mold volume extracts. [RM-9894]
• Add MEUSBRUGER guides E5140, E5152 and E5202. [RM-9900]
• Update MEUSBURGER components to latest state: 2nd quarter 2020. [RM-10028]

Improvements

• Improve cutout creation in case cooling components are placed on flat reference surface, but ray hits angular surface. [RM-9736]
• Implement way to check for multiple types of licenses (Advanced and Standard) in license.ini.[RM-10026]
• BOM_BALLOON_CUSTOM_PARAM works with component parameters as well [RM-10081]

Bugfixes

• Issue fixed: Missing entries in bore_screw.cfg for 1.4 and 1.6 mm bores. [RM-9633]
• Issue fixed: Problem in Knarr insulation plate 77336. [RM-9668]
• Issue fixed: "G" Character is missing in for non-ISO mm threads, instead "M" is displayed. [RM-9716]
• Issue fixed: In case insert mode is activated and insert position is below or inside of a group, the new reference and cutout UDFs will be assembled inside of UDF. [RM-9734]
• Issue fixed: Eyebolts two features in cavity plates are not centered. [RM-9760]
• Issue fixed: Missing Transparency in color of EMX plates. [RM-9792]
• Issue fixed: Issue with counter bore depth value in flat head auto screws. [RM-9821]
• Issue fixed: Invalid relation in template file of guide_e1144. [RM-9833]
• Issue fixed: Unable to change thickness of Meusburger Side Interlock. [RM-9883]
• Issue fixed: Length and Width values of standard plates can be change when Special shape is set. This can lead to incorrect order numbers. [RM-9985]
• Issue fixed: Ejector pin Symbols are only created on one cavity insert. [RM-9987]
• Issue fixed: In case mold base size changes and option keep plate thickness is set, in case no valid instance was found order number changes to P plate. [RM-9994]
• Issue fixed: In case model is tagged as purchased part in BOM, sub comps are still listed in Repeast region on drawing. [RM-10007]
• Issue fixed: In case of option pattern on all models and models are assembled on symmetric angles analysis feature in refgroup fails. [RM-10012]
• Issue fixed: Problem with EJP_ORIGIN_MOLDBASE coordinate system in assembly when placeing ejector pins. [RM-10027]
• Issue fixed: Add missing counterbore in meusburger guide components E1100 and E1105. [RM-10034]
• Issue fixed: Wrong GUIDE_BORE_LEADERPIN_SPECIAL diameter in plates meusburger F55. [RM-10109]
• Issue fixed: In case ejector pin is defined on multi point feature and partname is e.g. 29 chars it can occur that individual partnames can not be created. [RM-10143]
• Issue fixed: Regression: Option USE_SHORT_NAME_TRIM_EJP does not work correctly. [RM-10144]
• Issue fixed: References in Rotfix features of ejetor pins need to be verified to avoid failing of feautres when rotfix rotation value is edited. [RM-10145]
• Issue fixed: In case option EXCL_SIZE_CALC_PARAM is used, the size format includes an additional "=". [RM-10165]
• Issue fixed: Dimensions of sub components are not set correctly when archiving instances of assemblies in Component Editor. [RM-10169]
• Issue fixed: In case Modfiy Project is run on an active Workspace, the drawings are not correctly renamed. [RM-10170]
• Issue fixed: In case drawings is created during project modification with active Windchill, there are still ghost objects of skeleton and machine in workspace. [RM-10173]

10.0 M052 2020-04-29-01

Enhancements

• Ejectors: Add note "trimmed" or "auto_length" to NOTE Parameter for ejector pins. [RM-6403]
• Enable multi-page export of DFX-files in BOM. [RM-7499]
• New STRACK guides implemented [RM-7541]
• Parameters of the mold models are copied to duplicated cavity assemblies when using Duplicate Cavity under EMX Manufacturing Mode [RM-8898]
• New inch DME Ejector Pins implemented [RM-8918]
• Add functionality to use EMX Parameters in PART_RENAME_FORMAT configuration option [RM-8919]
• Implement general solution to add numbers into USER_NUMBER with changing the dat files by usuing the config file cusomer_numbers.cfg [RM-8990]
• Change the Ejector UDF´s from counterbore depth to real guide length. [RM-9289]
• New DME side interlock BGS. [RM-9442]

Improvements

• Use COOL_HALF_ANGLE in cooling cutout values instead of fix value. [RM-6386]
• Improve "sel_list.txt" behavior in combination with "supplier.cfg". [RM-6394]
• Shortened baffle length is only writtten to NOTE Parameter for Meusburger E2100. Do it for all baffle components [RM-6427]
• Improve beahvior: In some parts it can occur, that the screw option THRU_ALL is cutting not to the next surface, but throught the whole model. [RM-7616]
• Plate feature dimensions can now be locked and are not set back in case of size change. [RM-7994]
• Apply SMARTColor udfs from mm to inch, Add EMX_SURFACE_FUNCTION parameter to inch plate templates. [RM-8692]
• In case clamping plate changes from F10 to F20 the insulation plate is not automatically updated. [RM-8895]
• Also Update all cutout UDFs in Update Ejector Pin Dialog. [RM-9305]
• Update existing MEUSBURGER E-components to latest state: 1st quarter 2020.
• Update existing MEUSBURGER P and F plates to latest state: 1st quarter 2020.

Bugfixes

• Issue fixed: Component Editor - Cut quilt surfaces in subcomponents are not listed in table (e.g. Slider). [RM-6387]
• Issue fixed in Meusburger Babyplast. [RM-6655]
• Issue fixed: Negative plate clearance value should not be allowed, stock allowance is displayed invalid while modifying a plate [RM-8115]
• Issue fixed: In case Layers are create per PART and component is patterned, only the pattern header is added to the layer.[RM-8373]
• Issue fixed: Material to part is not set if the material parameter is processed in BOM. [RM-8772]
• Issue fixed in Update Ejector Pins Dialog. [RM-8886]
• Issue fixed: Crash in case no PTC Tool Design Option license is availabe and ejector pin should be trimmed with Trim feature. [RM-8887]
• Issue fixed: For moldbase Mesburger/Type3, if choose P plate to replace default one, some holes are also displayed. [RM-8892] [SPR-9510062]
• Issue fixed: EMX Warning about "Cannot find a matching instance as a replacement for the guide component." will prompt when trying to load futaba moldbase. [RM-8896] [SPR-9431001]
• Issue fixed: In case BOM position ids are frozen and a plate is modified in assembly defintion the position id is manipulated [RM-9138]
• Issue fixed: Assemble again with the option NAME_SUBASM_COMP default references are not set [RM-9145]
• Issue fixed: PRYSLOT features for Meusburger plates can sometimes not be regenerated in case the plate thickness is modified. [RM-9147]
• Issue fixed: Load moldbase "futaba_h/HA-type", the cutout of the 3rd guide isn't created. [RM-9255] [SPR-9632843]
• Issue fixed: Unable to create vertical waterline in Waterline Designer with error "Failure Diagnostics" [RM-9256] [SPR-9635168]
• Issue fixed: Problems with Meusburger Stop Disc E1500 screws. [RM-9265]
• Issue fixed: It is not mossible to jump bewteen the the selected lines in the BOM using the arrow keys. [RM-9351]
• Issue fixed: Crash in case skeleton model is manually deleted by user and Moldbase Definition Dialog ist opened [RM-9368]
• Issue fixed: In case individual dat files are placed in EMX_USER_CONFIG_PATH folder and _types.txt file is active, all other dat files from default installation are ignored .[RM-9467]
• Issue fixed: Visible locked features not working correctly on rail models. [RM-9497]
• Issue fixed: Unable to set Shoulder height to 2 inch for Cyl head shouldered ejector pin. [RM-9527] [SPR-9914500]
• Issue fixed: Prefix ist not set correctly for subcomponents in Library component assemblies while modifying. [RM-9532]
• Issue fixed: Components with manually changed names which still include prefix are renme to old name in case components is modifyied and the size will be changed. [RM-9542]
• Issued fixed: PTC waterline features are not colorized in Show Waterline command when exporting waterline model. [RM-9547]
• Issue fixed: Images in Component Dialog and not correctly displayed when initially starting the dialog and the screen resolution is smaller the the initial dialog height [RM-9551]

10.0 M051 2020-01-13-01

Enhancements

• New function in Bill of MAterials: Delete all Balloons on Drawing with one click [RM-6237]
• STRACK component catalog updated [RM-9166]

Improvements

• Implement plausiblity check for cooling diameter values [RM-8944]

Bugfixes

• Issue fixed: Multiple problems with DME inch mold bases [SPR-8288021] [RM-8371]
• Issue fixed: In case 3+1 Pattern for guides is set and F Palte is switched to P plate the guide bores on second pattern ar e not surpressed. [RM-8885]
• Issue fixed: There is no dimension listed in detailed image and no "Size" nominal dimension available for hasco/single_locking Slider [SPR-9433504] [RM-8897]
• Issue fixed: Correct counter bore depth for flat head screws DIN 7894 [RM-9157]
• Issue fixed: If the option PRE_HIGHLIGHT_BEFORE_DELETE is set, the section is highlighted twice when deleting a component. [RM-9165]
• Issue fixed: Cooling components with option assembled on all models enable are assembled to often with component status [RM-9173]

10.0 M050 2020-01-09-01

Bugfixes

• New set of udfs have incorrect relation BENENNUNG=rel_modelname() which is added to all models, the UDFs are assembled to. [RM-9245]

10.0 M040 2019-09-27-01

Enhancements

• Implement new HASCO screws Z34, Z351, Z371, Z372, Z3721, Z721. [RM-8553]
• Implement new HASCO sprue bushing Z510, Z530. [RM-8553]

Improvements

• Improve messages in case of invalid license and invalid creo version. [RM-7335]
• Move Technology Colors Button in Ribbon from Preparation group to EMX Tools in Part Mode [RM-6656]

10.0 M033 2019-09-02-01

Enhancements

• EMX is now ready to be used with B&W SMARTColor. [RM-7943]
• Update HASCO Plates. [RM-6557]
• New STRACK Z4 latch lock. [RM-7540]
• New KNARR plates knarr_f (MEUSBURGER compatible) and knarr_k (HASCO compatible). [RM-7815]
• New KNARR guide components 551000, 551000DLC, 551010, 551010DLC, 551100. [RM-7815]
• Enable Spinbox in nominal values table of Component and Library Component Dialog to set minimal and maximal values [RM-8278]
• New Button with weblink to component data sheet in Component Dialog. Implemented for MEUSBURGER, HASCO,STRACK, KNARR [RM-8402]
• New KNARR ejector pins 39111, 39111DLC and 39414 [RM-8409]
• New KNARR insulation plates 77335 and 77336. [RM-8511]
• Show cooling threads not only with cosmetic thread but also with additional surface. [RM-7013]
• Rename quilt cut UDF group by parent model name. [RM-7425]

Improvements

• Improve shoulder screws functionality. [RM-7878]
• Designate screw_bore and cooling_bore entries as INCH or MM thread. [RM-8669]
• Component status should be enabled by default [RM-7762]
• Component editor - When adding a component with family table the nominal dimensions are not automatically listed [RM-7392]
• Do not set Option DEFAULT_WATERLINE_DIA to 8 mm. Set it to "-" instead. [RM-8383]
• Copy parameter from EMX_SURFACE_FUNCTION from quilt surface to cut surface. [RM-8397]
• Introduce additional ray algorithm for all kinds of components when searching for intersecting models [RM-8590]

Bugfixes

• Issue fixed: Components assembled from top assembly to top_sub_sub assembly loses reference when modified in top_sub assembly. [RM-6242]
• Issue fixed: MEUSBURGER pryslot features have invalid geometry.[RM-6397]
• Issue fixed: Ejector length is not calculated correctly if an offset is added to the ejector [RM-6398]
• Issue fixed: In case NAME_SUBASM_COMP option is active, predefined screws are not assembled to NAME_SUBASM_SCREW assembly [RM-6399]
• Issue fixed: Radius in Meusburger E1702 is not set correctly. [RM-7975]
• Issue fixed: Wrong screw core dia in DIN flat screws. [RM-8063]
• Issue fixed: Guide Bush E1105 needs additional nominal instance DM1. [RM-8237]
• Issue fixed: Avoid error message when start EMX. [RM-8324]
• Issue fixed: "One plate" option is not available for din screw DIN7991. [RM-8328]
• Issue fixed: Problems with cooling components in INCH assemblies. [RM-8372]
• Issue fixed: Problems with screw components in INCH assemblies. [RM-8382]
• Issue fixed: Unable to create Mold Base of size 7.875 x 11.875 for A-Series. [RM-8385]
• Issue fixed: Incorrect orientation of Inserted Screws. [RM-8387]
• Issue fixed: Relationship import from .rel files are wrong if converting is not UTF8. [RM-8393]
• Issue fixed: In case Creo is minimized with Moldbase Definition dialog open, Creo is set to a white screen. RM-8408]
• Issue fixed: Double and integer parameter values predefined at component templates are not recognized and overwritten by default values. [RM-8424]
• Issue fixed: Curves and components assembled with the Waterline Designer have a rotated position in case of invalid default coordinate system.[RM-8442]
• Issue fixed: Crash after second saving component dat file with Component Editor. [RM-8447]
• Issue fixed: Component drawings are always created even if CHECK_DWG_TYPES is disabled. [RM-8486]
• Issue fixed: Return Pins are not updated by Update Ejector Pins Dialog. [RM-8523]
• Issue fixed: The feature of cut_s in lifter E3246 is not correct. [RM-8533]
• Issue fixed: Assembly references can not be modified in AUTO_SCREWS. [RM-8552]
• Issue fixed: Turn Option is missing in E1144 guide components. [RM-8553]
• Issue fixed: Creo 6.0 with EMX 12.0 exits prematurely when changing Mold base size. [RM-8558] [SPR-8697407]
• Issue fixed: Failed to hide the machine part in the drawing view of EMX project assembly by Hide RMB command or layer status in EMX 12.0.0.0/11.0.2.0/10.0.0.0. [RM-8559] [SPR-8736403]
• Issue fixed: Crash in Show Waterline Dialog. [RM-8584]
• Issue fixed: Colors in Show Waterline Dialog have incorrect order when waterlines are defined with Waterline Designer. [RM-8589]
• Issue fixed: EMX crashes if cooling components are not selected (displayed) when creating waterlines in waterline designer. [RM-8591]
• Issue fixed: Ejector guide bush cutout incorrect if retainer plate ref distance > 0. [RM-8592]
• Issue fixed: When adding tolerances manually to cut out of UDF Dimension they are removed when modifying the component. [RM-8594]
• Issue fixed: Wrong display for holes in support pillar cutouts. D1 and D3 values inverted. [RM-8595]
• Issue fixed: Ejector Pin Designer does not work with auto sub assemblies (NAME_SUBASM_COMP) active. [RM-8598]
• Issue fixed: Working dir is changing when assembling Ejector Pins from Ejector Pin Designer. [RM-8602]
• Issue fixed: Incorrect angle "A" of HASCO Z01 pin. [RM-8627]
• Issue fixed: Dimensions for MEUSBRUGER insulation plate 1403 is wrong. [RM-8630]
• Issue fixed: Can not open drawings after renaming , [RM-8641]
• Issue fixed: Several issues in Update Ejector Pin Dialog [RM-8674]

10.0 M032 2019-06-05-01

Enhancements

• New Lifter E3244, E3246 and E32481. [RM-8236]
• Add new Option SHOW_CHAMFER to display all Chamfer in all plates. [RM-8327]
• Improve Runner Library Components [RM-8262]
• Introduce new configuration file which allows user to define custom order number rules depending on supplier, unit, type and file names. Can be edited in EMX Options. [RM-7118]
• Introduce new functionality to trim ejector pin head against each other. [RM-6728]
• Introduce new Update Existing Ejector Pins Dialog which allows user to update ejector pins in case the required reference distance has changed [RM-7199] [RM-7344]
• Improve the performance of parameter write and read functions. Assemble 240 ejector pins is 45% faster, Open the BOM Dialog is 40% faster and close the BOM Dialog is 55% faster [RM-6945]
• New MEUSBURGER cooling component O-Ring E21311. [RM-8057]
• New MEUSBURGER ejector pins E17003 and E1723. [RM-8057]
• New HASCO slide plates Z555, Z556 and Z557 [RM-7319]
• New and updated HASCO ejector pins Z412, Z4650, Z4651, Z4670, Z4671, Z413, Z443, Z457, Z461, Z465, Z44, Z441, Z45 and Z451 [RM-6552]
• New HASCO guides Z14 and Z1105. [RM-6558]
• New HASCO cooling components Z9430 and Z9400. [RM-6558]
• Show outline dimensions in model size dialog drawing area. [RM-6511]
• Allow user to toggle between Diameter x Length or XxYxZ value in Model Size Dialog. [RM-6724]

Improvements

• Waterline Designer: Components are always assembled to top assembly of working model. Auto cooling subassemblies are not considered. [RM-8293]
• Plate Dialog: Avoid interaction with plate features in case it is a standard plate. [RM-8113]
• Set Option SHOW_PRYSLOTS new default value to NO, use feature_data.txt values instead as default. [RM-8326]
• Duplicate Cavity: Use External Merge KE to create copies and avoid dependency with and modification of original manufacturing assembly [RM-8107]
• Ejector Pin Designer: Improve behavior of simplifier representation. [RM-8156]
• Improve Duplicate Cavity procedure to avoid invalid placement of reference parts. [RM-8219]
• Update DIN Screws. More lengths are now available. [RM-6307]
• Update existing MEUSBURGER E-components to latest state: 1st quarter 2019. [RM-8057]
• Remove deprecated HASCO screws Z30. [RM-6558]
• Updated HASCO screws Z33 and Z330. [RM-6558]
• Updated HASCO knockout Z02. [RM-6558]
• Updated HASCO locating rings K100, K107, K500, K501, K505, K506, K1000, Z7510 , Z7515, Z7520, Z7525, Z7530, Z7535 and Z7540. [RM-6558]
• Updated HASCO dowel pins Z25 and Z26. [RM-6558]
• Updated HASCO guide Z01, Z010, Z10, Z20, Z040, Z0100. [RM-6558]
• Updated HASCO cooling components Z94, Z940 and Z9661. [RM-6558]
• Model size algorithm improved: Some cylindrical parts are recognized as squared parts. [RM-6305]
• Improve calculation time of model size algorithm. [RM-7582]
• Partname default rules need additional "_" between name and id, e.g.

  BAFFLE<3id>. [RM-6425]

• Images and thumbnail image for Library Component Editor are not created with imagemagick anymore. This avoids possible issues while creating gif images. [RM-7581]
• Agathon top interlocks should automatically assemble screws with additional fastener cutouts. [RM-6108]

Bugfixes

• Issue fixed: Hasco Z35 Dowel pins cutout images are display flipped. [RM-6187]
• Issue fixed: Cooling cut outs can not be created in parts with assembly material cuts in case option ADD_COOLING_REF_IN_PART is set to YES. [RM- 7985]
• Issue fixed: Cut position for circlip in Hasco Z11 is incorrect. [RM-7973]
• Issue fixed: All components in old EMX 4.1 moldbase are deleted in case cooling component is deleted with EMX 10 and above. [RM-7939]
• Issue fixed: Offset value is incorrectly set when editing tolerance value in UDF Dimensions table [RM-7902]
• Issue fixed: Invalid UDF Dimension settings in Meusburger E2071 in case SECONDBORE option ist unchecked. [RM-7875]
• Issue fixed: Traceback while assembling ejector pins with component status dialog user is ask for trim surface. [RM-7847]
• Issue fixed: Drawing files are not found for library parts in case file name is defined capitalized, but file it self is named with lower characters. [RM-7823]
• Issue fixed: Delete toggle direction option for Stop Dics/Pins at all, because it is not working correctly. [RM-7822]
• Issue fixed: W value for RAIL_OFF feature of D plate of Pedrotti supplier is not correct with respect to the catalog [RM-7816] [SPR-8109506]
• Issue fixed: Open window title "Open comp_data.txt-file to split its content into separate *.dat-files" is not localized [RM-7656] [RM-8057258]
• Issue fixed: Dialog title "Main_Axis Position" is not localized for "Define Main Axis Offset" operation. [RM7655] [SPR-8057412]
• Issue fixed: Crash in Waterline Designer in case waterline is added to model with assembly material cut [RM-7587]
• Issue fixed: When assembling plates to the moldbase for some bores only one cylinder side gets colored. [RM-7584]
• Issue fixed: Files are not deleted from disc in case plate is deleted with "No Components" checkbox even if DELETE_FILES_AFTER_DELETE option is active. [RM-7585]
• Issue fixed: D-M-E Extension Plug JPB cannot be assembled correctly. [RM-6179]
• Issue fixed: Invalid position of placement surface in cooling component MEUSBURGER E2046. [RM-6163]
• Issue fixed: Hasco cooling Seal Plug Z942 should not have counterbore option. [RM-6180]
• Issue fixed: False entries for Dimension LG2 of Meusburger component E1115. [RM-7263]
• Issue fixed: with $Enviroment variables in EMX_USER_CONFIG_PATH are not replace. [RM-7603]
• Issue fixed: Classification function overwrites predefined parameters for cavity parts with defaults from partnames.cfg [RM-6532]
• Issue fixed: When placing cooling chanels in part mode invalid partname message appears. [RM-7660]
• Issue fixed: EMX is crashing when clicked on Options from "Administrator Tools" panel in Italian. [RM-7654] [SPR-8057371]
• Issue fixed: Component Editor is not overwriting existing dat files. [RM-7622]

10.0 M031 2019-01-25-02

Enhancements

• Add STRACK compact slider assemblies Z4290, Z4290L, Z4292, Z4293, Z4294, Z4294L, Z4295, Z4296, Z4296L, Z4298. [RM-5033]
• Add STRACK ejector pins R1628 and R1634 and update Z90, Z92, Z95 and Z98.
• Add HASCO Z330 torx set screw. [RM-7544]
• Update HASCO Insulation Plates Z121, Z121 with hole, Z1212, Z1213.
• Add MEUSBURGER cooling component E2112. [RM-7120]
• Add MEUSBURGER guide components E5000 and E5200. [RM-6308]
• Add MEUSBURGER ejector pins E1711 and E17264DLC. [RM-6550]
• Update MEUSBURGER components to state 4th quarter 2018. [RM-6882]
• Add DIN ejector pins DIN1530-D, DIN6751, DIN8405, DIN8693 and DIN8694. [RM-7498]
• Implement a direct Export to Excel Interface for the Bill of Material. [RM-7431]

Improvements

• Highlight BOM Item in Graphics window with one click instead of double click. [RM-7009]
• Readd old Hasco slider set "With retainer" [RM-6272]
• Highlight BOM Item in Graphics window with one click instead of double click. [RM-7009]

Bugfixes

• Issues fixed in MEUSBURGER cooling component E2110 [RM-7119]
• Issue fixed: Format file in Working directory is deleted when modifing Project. [RM-6452]
• Issue fixed: Thread is not created in plate, in case screw length exceeds plate thickness [RM-7428]
• Issue fixed: Check thread of Meusburger cooling component E2025. [RM-6204]
• Issue fixed: Some issues at Meusburger Cooling E2110. [RM-7119]
• Issue fixed: Angle for cooling component MEUSBURGER E2088 does not work. [RM-6166]
• Issue fixed: Meusburger plates have steel materials assigned without "1." prefix. [RM-7427]
• Issue fixed: In case assembly cuts exists in model tree, Bill of Material can not collect all models. [RM-5744]
• Issue fixed: mm Sliders do not have detail images. [RM-6607]
• Issue fixed: Ejector Pin Symbols: ejp holes and ejp symbol circles are not coaxial. [RM-6961]
• Issue fixed: Ejector Symbol have incorrect height in drawing views with different scale then drawing sheet. [RM-6963]
• Issue fixed: In case first bom item in BOM is edited with EditBOMItemDialog, parameters are incorrectly written to models [RM-7441]

10.0 M030 2018-12-20-01

Improvements

• Add a new config option which allows user to use layers for side views. [RM-7345]

Bugfixes

• Issue fixed: Changing of "project name" and "prefix" for Moldbase in EMX may delete drawing formats in working directory. [RM-7331] [SPR-7799658]
• Issue fixed: Strings for button caption are too long in "Component Editor" windows and truncation happened for localized client. [RM-6979] [SPR-7397756]
• Issue fixed: Crash when selectiong invalid node in tree of moldbase definition dialog [RM-6435] [SPR-3674069]
• Issue fixed: Waterline Designer: Crash when deleting waterlines defined on parts that are assembled twiche in the moldbase. [RM-7349]
• Issue Fixed: Mathmatical Expressions can not be evaluated in with Creo 5.0.3.0. [RM-7343]
• Issue fixed: When modifing component and current type is not available anymore in list of all types, incorrect type (first in list) is displayed. [RM-7338]
• Issue fixed: User Name can not be modified in Project Modify Dialog. [RM-6421]
• Issue fixed: In case the rule EJP_LL-RAY_THICK is replaced, the LL value in the ejector cutout is incorrect. [RM-7325]

10.0 M022 2018-12-07-01

Bugfixes

• Issue fixed: Warning "Can't Read Partnames File" appears in case partname file is not writeable and missing partname entries should be added to part name file. [RM-7322]
• Issue fixed: Copy to Clipboard in BOM Dialog is not working correctly. [RM-7259]
• Issue fixed: Crash when creating new project with stored template assembly from archive path. [RM-7224]
• Issue fixed: Component type specific post regen relations are not passed to components. [RM-7152]

10.0 M021 2018-10-11-01

Enhancements

• Unicode characters are supported for filenames, parameter names and parameter values [RM-6798] [RM-6789]
• "Use One Model Rail" can be modify in Plate Dialog, The EMX Option USE_ONE_MODEL_RAIL only sets the default value. [RM-6289]
• Add new MEUSBURGER cooling component E20749 and E2074D. [RM-6717]
• Allow arrow keys in BOM to activate current cell and re-enter neighbored cell [RM-6385]
• Create button to reset component dialog settings from emx roaming folder. [RM-6028]

Improvements

• Manual edited entries of the BOM are not desginated by a "*"-character, An Asterisk-Icon is used instead [RM-6327]
• The EMX Option ENABLE_MULTI_EJP should be a check box in Ejector Component Dialog.
• When assembling screw UDF SCREW_CB is placed on REF_PLANE, use RAY_PLANE instead [RM-6947] [RM-6504]

Bugfixes

• Issue fixed: Centering sleeves are assembled in opposite direction [RM-6803]
• Issue fixed: EMX Options SAVE_SIZE_IN_EMPTY_ORD_NUMBER is not working with Option RECALC_SIZE_WHEN_OPEN_BOM activated. [RM-6946]
• Issue fixed: PITCH and THREADS_PER_INCH values are set to default values. COOL_PITCH from cooling_bore entries is ignored. [RM-6820]
• Issue fixed: Freeze Position IDs does not work correctly with position parameter written to part. [RM-6806]
• Issue fixed: Counterbores of Meusburger E1367 locating ring is not regenerating for some instances. [RM-6804]
• Issue fixed : When define Sprue Bushing, if the Offset value is a negative number and its absolute value is equal to (or bigger than) K-value, then there is not cut created in the plate. [RM-6709] [SPR-7587367]
• Issue fixed: In case points of ejector pins are below trim surface it is not possible to select a valid ejector length. [RM-6696]
• Issue fixed: In case user clears Project Prefix or Project Name in Project Dialog input panel, names are always reset. [RM-6704]
• Issue fixed: Confusing behavior when changeing screw types [RM-6536]
• Issue fixed: Relations in guide component template guide_e1110.prt are incorrect [RM-6301]
• Issue fixed: With new localized EMX Options, some text descriptions are incorect. [RM-6401]
• Issue Fixed: Sorting BOM by Parameter values from column header does not work as expected. [RM-6292]
• Issue fixed: Incorrect groove diameter for PARKER nitrile o-ring. [RM-6286]
• Issue fixed: Arrows (flow in and flow out) from cooling components without counterbore are incorrectly positioned [RM-6175]
• Issue fixed: Cool Plug UDF in Hasco Z942 is duplicated when modifying component position. [RM-6719]
• Issue fixed: Ball plug offset Meusburger E2071 is not set up correctly in case udf dimension value is modified. [Bug #6707]
• Issue fixed: While Modifing Components from Moldbase Definition, types are not updated correctly in any case. [RM-6706]
• Issue fixed: In EMX Options Dialog validate cell content, avoid, spaces, invalid characters. [RM-6657]

10.0 M020 2018-09-07-01

Bugfixes

• Drawing Areas of Moldbase Definition Dialog not visible in Creo 5.0.2.0 [RM-6937]

10.0 M014 2018-06-28-01

Enhancements

• In Plate Dialog a third visibility option "visible locked" is now available, which allows user to lock a resumed feature within the plate. It will no be suppressed during size change of the plate. [RM-6611]
• Clamping slots are now available for LKM side gate moldbases. [RM-6476] [SPR-7559604]
• Introduce new validated cut out udfs for ejector pins. Rework variable option behavior. [RM-6569]
• Update MEUSBURGER plate catalog to latest state of March 27th 2018. [RM-6230]
• Update KNARR ejector, guides, component data to the latest state June 14th 2018. [RM-5933]
• New udf cut out images for Cooling, Guides, Dowel Pins and Ejectors. [RM-6227]
• Add new EBERHARD ejectors 6116, 6118, 612R, 6143, 6178, 6261, 6271, 6281, 6331, 6335, 6341, 6351, 6361, 6371, 6381, 6441 and 6622. [RM-5843]
• Add new STRACK side interlocks W44, Z38 and Z46. [RM-5467]
• Add EMX Functions to Creo 4 Quick Access Toolbar. [RM-6152]
• Keep selection of selected datums when defining a new component. [RM-5291]
• Add new STRACK spring components SN2520, SN2540, SN2560, SN2580 and SN2590. [RM-5465]
• Add new STRACK urathane springs SN2600 and SN2625 [RM-5465]
• Cutout data for Progressive ESTW-ejector sleeves is incorrect [RM-6294]

Improvements

• Make sure Ejector Pin Option TRIM and AUTO_LENGTH are not used at the same time. [RM-6590]
• In Ejector Pin dialog add icons to rotation fixture option menu. [RM-6507]
• Allow PLATE_THICKNESS as keyword in rules of feature_data.txt. [RM-6428]
• Add GROOVE feature to plate_5_es template. [RM-6429]
• Updated STRACKk ejector component data. [RM-5457]
• Nominal values for DME stop disc SB are not correct Bug [RM-6274]
• Increment name from ejector pins are not correct when placed in subassemblies. [RM-6189]
• Some improvments in Component Editor GUI.

Bugfixes

• Issue fixed: Ejector pin preview sketch udfs does not support rotfix angle. [RM-6626]
• Issue fixed: On trimmed ejectors, in case distance from head surface to trim surface exceeds nominal ejector length, ejector is incorrectly extended to invalid length, which does not fit order number. [RM-6340]
• Issue fixed: While trimming ejector pins, trim quilt surface is not found correctly in case of edge cases. [RM-6275]
• Issue fixed: BUW_BOM_MANUAL Parameter is overwritting existing EXCEL_IGONRE and BUW_INCLUDE_IN_BOM setting. [RM-6373]
• Issue fixed: Japanese Project Name display garbled characters in model tree. [RM-6372] [SPR-7397766]
• Issue fixed: Relation in screw_7-templates are wrong [RM-6316]
• Issue fixed: Cutout data for Progressive ESTW-ejector sleeves is incorrect. [RM-6294]
• Issue fixed: Ejector pin instance is not found with COLOR added to nonimal values. [RM-6240]
• Issue fixed: Colors of surfaces are not applied on both surface sides [RM-6287]
• Issue fixed: Values of the guide counterbore cut outs are wrong for dme-moldbases larger 396x396. [RM-6277]
• Issue fixed: Problems while assembling Auto screws on misumi locating rings. [RM-6229] [SPR-7533175]
• Issue fixed: For Eberhard blade ejectors the A and B values of the squared tip need to be flipped. [RM-6209]
• Issue fixed: Dowel pin cut out images are not correct for CounterboreTop-BlindholeBottom and CounterboreBottom-BlindholeTop. [RM-6205]
• Issue fixed: Option SAVE_SIZE_OF_PART_IN_EMPTY_ORDNUMBER is not working correctly. [RM-6190]
• Issue fixed: Pos id in PART_RENAME_FORMAT is not replaced correctly. [RM-6191]
• Issue fixed: Strack cooling extension Z7714 has incorrect cut out definitions. [RM-6178]
• Issue fixed: Cooling component Meusburger E2300 has incorrect orientation plane defined. [RM-6171]
• Issue fixed: Cooling component Meusburger E2318 has incorrect cut out. [RM-6169]
• Issue fixed: Components assembled on inverted surfaces in case placement surface is created by published geometry. [RM-6137]
• Issue fixed: With PRO_LANG set to "Chinese_Taiwan.950" emx uses incorrect encoding. [RM-5325] [SPR-6248970]
• Issue fixed: Japanese Project Name display garbled characters in model tree [RM-6372] [SPR-7397766]
• Issue fixed: Ejector pin instance is not found with COLOR added to nonimal values [RM-6240]
• Issue fixed: Components assembled on inverted surfaces (e.g. created by published geometry) are assembled in opposite direction [RM-6137]
• Issue Fixed: No default partname entries for cooling meusbruger E2081, E2082 and E2088. [RM-6165]
• Issue Fixed: When Modifying screws the thread depth information is not initially painted.[RM-6309]

10.0 M013 2018-03-14-01

Enhancements

• Implement STRACK side interlocks Z38, Z46 and W44 [RM-5467]
• Add Add Agathon top interlocks 7992 and 7993 [RM-5943]
• Add Meusburger component top lock E1311 [RM-5523]
• Add component HASCO circlip Z67 [RM-4975]
• New HASCO hoistring Z715 and Z725 added. [RM-6003]
• New HASCO guide components Z016 and Z025 added. [RM-6003]
• New HASCO ejector pins Z400, Z410, Z492, Z4655 and Z4656 added. [RM-6003]
• Update instances of HASCO guide components Z011, Z012, Z013 and Z022. [RM-6003]
• Update instances of HASCO screw Z31 and Z32. [RM-6003]
• Update instances of HASCO ejectors Z40, Z41 and Z42. [RM-6003]

Improvements

• Enable options CREATE_LAYERS_PER_PART and CREATE_GROUP_LAYER again [RM-4217]
• Avoid Size-Change-Warning message if no components exist when modifying size in Moldbase Definition [RM-6043]
• Make sure toplocks are displayed properly even if depth values are not defined in dat-file [RM-6042]
• The color props Intensity and Ambient should be set to 100 when setting technology colors [RM-6102] [C-14031621]
• The value for CUT_CB_DIA of Hasco Z1000 bush should be shoulder-diameter+1mm [RM-6080]
• With AUTO_SAVE_LAST_COMPONENT for cooling components the bore depth value is possibly incorrect [RM-6004]
• When manually modifing Plate thickness to non standard value. in 3+1 Pattern 4
• Reduce row default row height in cut out table of component dialog. [RM-5936] equal guide components are assembled during update of dependent components [RM-5977]

Bugfixes

• When adding new plate between two existing plates guide components are temporary painted in wrong position [RM-6034]
• When assembly library assemblies freely, without assembly reference, subcomponents, subcomponents are not renamed correctly [RM-6006]
• The ejector plate dimensions in some bigger Meusburger-sizefiles are wrong [RM-6078]
• Make sure to set correct BUW_ORD_NAME component parameter in second rail [RM-5666]
• When calculating cooling bore overlap value ... nominal values such as R1/8 etc. are not considered properly [RM-6048]
• Creo Parametric 3.0 exits prematurely when selecting Assembly Definition in specific assembly in EMX 9.0 [RM-5500] [SPR-5258833]

10.0 M012 2018-02-05-01

Enhancements

• Allow export of waterlines with centerlines for MOLDFLOW analysis. [RM-5901]
• Add Option to tag ejector bores with parameter BELONGS_TO_WATELRINE to make it visible vor mold design wall thickness check. [RM-5810]
• Provide a pulldownlist in the Component Editor to define CUTQUILT-specific parameters. [RM-5765]
• Allow usage of Creo-Component Interface in EMX library components. [RM-2809]
• Improve handling of Standardparts when working with Windchill. [RM-5793]
• STRACK plate catalog updated. [RM-5464]
• New Button in Ejector Pin Designer: Placement of ejector pins on existing points implemented [RM-5024]
• New AGATHON top interlock 7990 added. [RM-5482]
• Allow predefined dowel pin offset in component dat files. [RM-5572]

Improvements

• In the udf cut out table for cooling components important D5 and T5 value should always be first in list. [RM-5849]
• Speed up assembly time for ejector pins if they are defined on multi points features with multiple/patterned reference models. [RM5751]
• Add and verify OMNI sliders. [RM-4801]
• Add and verify D-M-E inch components, baffles and jiffy locks. [RM-5011]
• Improve DMS insulation plates and locating rings. [RM-5579]
• Meusburger cooling extension E2018 needs to be assembled and cutted like Hasco Z90. [RM-5924]
• Meusburger screw E1220 does not have an default offset value. [RM-5922]

Bugfixes

• Issue fixed: KNARR flat ejectors have flipped A and B values. [RM-5916]
• Issue fixed: KNARR ejector 33111 has incorrect head value. [RM-5921]
• Issue fixed: Setting bore colors does not work properly if arrows are included in Waterline Designer. [RM-5637]
• Issue fixed: When modifying a library component assembled in a subassembly, the incorrect assembly is displayed in the dialog box. [RM-5891]
• Issue fixed: Meusburer Screw E1240 has incorrect cutout values. [RM-5939]
• Issue fixed: Meusburger E1510 support pillar has deprecated PRE cutout bore. [RM-5938]
• Issue fixed: Meusburger stop pin E5105 has incorrect cut out bore diameter. [RM-5937]
• Issue fixed: In Library parts even ich material in dat file is set to "?" EMX tries to define a material. [RM-5932]
• Issue fixed: Knarr ejector 37111 with options core pin and rotfix enabled has an invalid angle. [RM-5919]
• Issue fixed: Knarr ejector 37999: Options Corepin and Autolength are missing. [RM-5918]
• Issue fixed: When modifying a component by selecting its refgroup, references get lost. [RM-5672]
• Issue fixed: UDF cool_thread_single has wrong geometry if point is not on surface. [RM-5673]
• Issue fixed: Ejector naming is incorrect when modify trimmed ejectors on multi point feature. [RM-5733]
• Issue fixed: Crash while modifing a component and no reference group exists. [RM-5770]
• Issue fixed: Wrong BOM_NAME after modifictaion of rails. [RM-5666]
• Issue fixed: Wrong position of datum plane wiht stripper plane. [RM-5719]
• Issue fixed: Delete all cooling function deletes all models if no cooling component is defined. [RM-5722]
• Issue fixed: Split comp_data.txt files is not working if it is not in EMX installation. [RM-5623]
• Issue fixed: IGES export for assemblies is incorrect. [RM-5611]
• Issue fixed: Missing buttons "Copy drawing" and "Drawing pulldown" in library dialog box. [RM-5594]
• Issue fixed: Inactive plate_material.txt file in plate dialog. [RM-5573]

10.0 M011 2017-10-25-01

Enhancements

• MEUSBURGER dat files updated to latest state of product data (15 October 2017).
• New MEUSBURGER compact slider sets E3080 with E3082/E3084 added. [RM-5032]
• New MEUSBURGER compact slider sets E3072 with E3074/E3076/E3078 added. [RM-5032]
• New MEUSBURGER compact slider sets E3070 with E3074/E3076/E3078 added. [RM-5032]
• New MEUSBURGER compact slider sets E3360 added. [RM-5032]
• New MEUSBURGER compact slider sets E3330 added. [RM-5032]
• New MEUSBURGER compact slider sets E3300 added. [RM-5032]
• New MEUSBURGER library component E2730 [RM-3634] added.
• New MEUSBURGER knockouts E1516 and E1517 for FW moldbases added. [RM-5471]
• New MEUSBURGER component E1064 for FW moldbases added. [RM-5452]
• New MEUSBURGER FW and FB-moldbases with plate features added. [RM-5391]
• New MEUSBURGER library component E2682 added [RM-5447]
• New MEUSBURGER library component E2680 to library components added. [RM-5447]
• New MEUSBURGER library component E3049 to library components added. [RM-5447]
• New MEUSBURGER screw E1226 added.
• New MEUSBURGER slider component E3048 added. [RM-5447]
• New MEUSBURGER slider component E3047 added. [RM-5447]
• New MEUSBURGER slider component E3045 added. [RM-5447]
• New MEUSBURGER support pillar E1512 and E1513 added. [RM-5447]
• New MEUSBURGER slider set E30110 added. [RM-3635]
• New MEUSBURGER guides E1115, E11202, E11206 and E1170 added. [RM-5381]
• New MEUSBURGER screws E1225, E1251, E1252, E1274 and E1275 added. [RM-5381]
• New MEUSBURGER ejectors E1700DLC, E17103, E1710DLC, E17262, E17262DLC, E17264, E1727DLC, E1728DLC and E1742 added. [RM-5381]
• New MEUSBURGER dowel pin E1301 added. [RM-5381]
• New MEUSBURGER top interlock E1306 added. [RM-5381]
• New MEUSBURGER side interlock E1308, E1315 and E1320 added. [RM-5381]
• New MEUSBURGER locating rings E1367, E1372, E1377 and E1382 added.[RM-5381]
• New MEUSBURGER springs E1536, E15365, E1537, E15375, E1358, E15385 and E1539 added. [RM-5381]
• New MEUSBURGER guide E1115 added. [RM-5380]
• New MEUSBURGER guide for knockouts E1150 with predefined screws added [RM-4977]
• New MEUSBURGER support bushing MEUSBURGER E1662, E1663 and E1664 added [RM-4976]
• New MEUSBURGER cooling components USA-type E23xx added. [RM-4856]
• New STRACK ejectors R1628, R1634, Z6015 and Z6017 added. [RM-5457]
• STRACK cooling component files Z7713, Z7730, Z7744, Z7746, Z7750 updated. [RM-5455]
• New STRACK cooling components Z7714, Z7720, Z7725, Z7748, Z7771 added. [RM-5455]
• New STRACK guides Z69, Z68, Z4315, Z4085, Z4078-R, Z4078, Z4077-R, W35, W35-R, W33, W33-R, W32, W31, W30, W25, W24, W23, W21, W20 added. [RM-5433]
• New STRACK dowel pin R523 added. [RM-5456]
• New STRACK locating rings Z10, Z11, Z16 added. [RM-5459]
• New STRACK support pillars Z19 added. [RM-5460]
• New OPTIZ library components date stamps DATI1000, DATI200, DATI2900 and DATI3000 added. [RM-5447]
• KNARR dat files updated to latest state of product data.
• New KNARR guides 264180, 51001, 51003, 51011, 510110W, 51100, 51110, 511100W, 51112, 51113W, 51114, 51210, 51211, 51702, 51711, 51712, 51713, 51722, 51911, 51912, 51932, 51934 and 551110 added.
• New KNARR ejectors, loacting rings and screws added.

Improvements

• "MAIN_CUT" feature can be edited in MEUSBURGER P-Rails. [RM-5446]
• Add Arrows for waterline flow in UDFs instead of components. [RM-2332]
• Improve evaluation of cylindrical parts in outline calculation. [RM-5257]
• Cleanup Arburg machine data.
• Consider Parameters driven by relation in BOM dialog box. [RM-5511]
• Consider new HASCO locating ring names and add missing description in comp_data-files. [RM-5495]
• Provide new LG-calculation rule in datfiles as comment. [RM-5360]
• When opening EMX Options complement current partnames.cfg with missing entries from template partnames file. [RM-5389]
• Add chamfers to baffle cutouts and calculate component length by bore-depth. [RM-5360]
• Add leaderpin-cb in plate_1_es template for PEDROTTI g-types. [RM-5421]
• Add GROOVE feature in stripper plate IS for PEDROTTI catalog. [RM-5396]
• Add SMALL-RAIL cut for D-type rails of PEDROTTI. [RM-5420]
• Enable Features driven by options also for Library Components. [RM-5358]
• New icons in Project Dialog added.
• Allow locally stored references for components in subassemblies. [RM-5368]
• Add missing cooling bores values in configuration/bore_technology. [RM-2332]
• Enable ROTFIX_ANGLE for EP_FIXTURE_CUT in all metric ejector templates. [RM-5321]
• Add relation for sketch in EJP-UDF to display parameter NUM. [RM-5261]
• Remove HASCO Round moldbases and components. [RM-5341]
• Replace option ADD_CUT_IN_FACE_OWNER with a checkbutton in component dialog box. [RM-4875]
• Remove Option "Check Interference" from component dialog box. [RM-5234]
• Improve dialog opening time of BOM Dialog with large assemblies and EMX 10 with Creo 4. [RM-5348]
• Equipment buttons (Thermal Insulation, Knockout, Side Interlock etc.) moved to Component Overflow.

Bugfixes

• Fix connection issue with license server flexlm 11.10
• In EMX 10.0 M010, unable to create the screw with "Predefine Component" option. But EMX 10.0 F000 worked.[RM-5497][SPR-7014037]
• ANSI standard screws inserted in Expert Moldbase assembly displays dimensions in ISO standards [RM-5498] [SPR-5191259]
• Add missing Meusburger plate pictures. [RM-5352]
• Add missing cuts for shoulder screws in intermediate plates. [RM-5539] [SPR-7033948]
• Update local parameters before defining a new component or enter moldbase definition. [RM-5502][SPR-7012301]
• Unable to set another guide component from mold base definition dialog box in EMX 10.0 M010. [RM-5499] [SPR-7012124]
• Meusburger screw with spring washer dat file has incorrect E1585 instances.
• Subcomponents and subassemblies are not exchanged recursively. Introduce function to exchange models in case of subassemblies in EMX assemblies. [RM-5532]
• Crash if folder names in subdirectories library path are identical. [RM-5526]
• Crash if no instances are defined for a library component. [RM-5519]
• Dat file of subcomponent in library asssembly MEUSBURGER e1930 is not defined.
• Autoscrews on Spruebush are not updated when offset is modified. [RM-5504]
• Trimmed ejector pins disappears, if modified. [RM-5503]
• HASCO Z11 guide bush data and cutout is incorrect.[RM-5494]
• When working in different assembly levels, the stored placement references cannot be rebuild in Modify-mode [RM-5486]
• Ordering numbers of return pins and support pillars are not updated when changing mold base size from moldbase definition dialog box. [RM-5367]
• It's not possible to add balloon-notes in drawings [RM-5484]
• M8x0.75 Core bore diameter needs to be 7.2 with ISO standards.
• "&drw_page" parameter is always initialized with page 1 even if solid is not displayed on drawing [RM-5444]
• Show Waterline feature does not include Reference Model. [RM-5248]
• The orient plane reference is not rebuild properly when modify a baffle component [RM-5424]
• Correct core depth for stop disc bores in PEDROTTI ejector base plate [RM-5373]
• PEDROTTI mold bases use stop discs instead of stop pins. [RM-5373] [SPR-6981055]
• Ordering numbers of guide components are incorrect after changing mold base size. [RM-5367]
• Ordering numbers of support, ejector pins, screws and guides are incorrect after changing mold base size.[RM-5367]
• Parameter value alue is set back after editing with "Edit BOM Parameter"-dialog. [RM-5374]
• Flip of orientation in library dialog. Difference between preview and final assemble of component. [RM-5371]
• Incorrect cut outs in FH cavity part when a lifter is placed. Only the MH should be cutted [RM-3006]
• Consider negative regenerated dims when reading Dimensions from library components [RM-5359]
• Not all possible *.rel-files are evaluated [RM-5357]
• HASCO Z13 data is incorrect. [RM-5355]
• Tolerance with initial "+" befor the number is not considered correctly.
• Avoid double cooling bores with option ADD_CUT_IN_FACE_OWNER enanbled. [RM-4875]
• Use invers values for THREADS_PER_INCH and PITCH in cosmetic threads [RM-5350]

10.0 M010 2017-09-08-01

Improvements

• Improvement of BOM export to EXCEL

Bugfixes

• For Library Components with subcomponents instances are not read correctly from dat file [RM-5481]
• Cut outs are not created in case ray trace function intersects with edge [RM-5378]
• Fix in Assemble predefined screws: Line was removed during manufacturing.

10.0 F001 2017-09-13-01

Enhancements

• When working with ADD_COOLING_REF_IN_PART, make sure Parameter BUW_PROJECT_SHORT is in all plates [RM-5204]
• Allow usage of two additional measurement planes as placement constraints [RM-5129]
• Allow UDF's in components with parameter BUW_GUIDE [RM-5126]
• Save thread depth and bore depth for predefined screws [RM-5125]
• Enable usage of partname-wildcards <partid_refx> also for predefined components [RM-5108]
• Increase number of allowed characters in EMX Options>Part Names>Partname-Column from 32 to 50 characters [RM-5107]
• BOM: Show how many objects were found with search panel [RM-5052]
• Add new Hasco side interlock Z09 [RM-4973]
• Add component HASCO guide bush Z14W [RM-4861]
• Implement new Rabourdin guide components 1071, 1005, 1061, 651, 671 and 601 [RM-4813]
• Update screw length when changing plate thickness [RM-4718]
• Knarr Ejector Pins: Add Round Types 37711, 33111 [RM-4610]
• Add components KNARR ejector sleeves 38488, 38781, 38882 [RM-4581]
• Add components KNARR core pins 37121, 37411, 37666, 37418 [RM-4580]
• Enable custom parameter Values in EMX BOM Balloons [RM-4399]
• Rework layer concept in EMX: Rule-driven layers etc. [RM-4217]
• Add Progressive x-style side locks SLX [RM-3649]
• Add new Stäubli cooling components (E28xx) [RM-3066]
• Enable moving of Inserts to the insert-subassemblies in Cavity Layout [RM-3036]
• NR_DIGITS_BOM is not considered in plate ordering numbers [RM-5250]
• When Modifying Assembly with auto lib threads, delete and recreate the auto lib threads [RM-5168]
• Show new columns for color transparency in Option/technology-dialog box [RM-4982]
• Allow usage of EMX10 dat-files combined with EMX9 udf_data-file [RM-5259]
• Add Latchlock MEUSBURGER E1840 (Round) [RM-5029]
• Add new STRACK compact slider sets: Z4290 [RM-5033]

Bugfixes

• When Modifying component and supplier is changed, name is not updated. [RM-5275]
• Inherited colors of cut-quilts are not applied to ref-patterned cutouts [RM-5269]
• C13777197: Machine Bar Pattern in Machine dialog box cannot be driven like other patterns [RM-5263]
• Enable VarParameters for UDF's to display the Ejector Pin Parameter PARTID in the plate that has the ejector head cut [RM-5261]
• OFFSET for ejector rotfix1 is wrong so chamfer fails [RM-5251]
• When open BOM dialog box, visible components are listed in the hidden block [RM-5249]
• Geometry of Ejector pin E1712 and its head-cutout is wrong [RM-5247]
• Duplicate message GUI emx_tip_preview_ce in emx_gui_messages.txt [RM-5246]
• Hasco Z10 guide bush toggle orientation when changing moldbase size [RM-5221]
• External Data of Smart Holechart gets lost when renaming parts [RM-5206]
• When modifying parts with RMB in old 4.1 moldbase-assemblies, EMX crashes [RM-5203]
• Multiple usage of preview button does not reset the display style [RM-5191]
• The template file "rule_layers.prt" is saved several times in configuration/templates [RM-5172]
• Allow coloring of the UDF auto_libthread [RM-5140]
• Simulation object roles, delay and stroke values of latchlocks are not update while modifing components [RM-5138]
• Correct setting of LATCH_DELAY and LATCH_STROKE-Parameters for Simulation [RM-5132]
• The model list of Mold Base Opening Simulation dialog box is not emptied when closing the dialog [RM-5130]
• The sketch cool_plug_symbol is not added to plates when defining a pipe-plug component [RM-5106]
• Shoulder values LG2 for EHS-ejector pins are wrong [RM-5105]
• When defining cooling comps in partmode, cooling comps are assembled multiple times [RM-5081]
• Finish incomplete data for Knarr ejector pin 37414 [RM-5073]
• Avoid crash when draw incomplete csys-patterns in Moldbase Definition [RM-5071]
• Cavity Layout Dialog: Cannot selection placement coordinate system of second, third cavity assembly [RM-5053]
• Copy/Paste in BOM does not work robust in drawing mode [RM-5039]
• Wrong usage of the term "Stücklistennummer/BOM Number" for Balloons [RM-5038]
• Check model quality and order numbers of HASCO slidersets [RM-5031]
• Latchlock HASCO Z170 (simple), Z173 (round), Z174 (flat): Models are inapporiate and need to be remodeled, Check References and Nominal Dimenesions [RM-5030]
• Latchlock MEUSBURGER E1820 (flat) Models are inapporiate and need to be remodeled, Check References and Nominal Dimensions [RM-5028]
• Latchlock Strack Z3 (round) and Z4 (flat): Models are inapporiate and need to be remodeled, Check References and Nominal Dimensions [RM-5027]
• Modify of predefine AUTO_SCREWS and AUTO_PINS in EMX10 cause crash [RM-4955]
• Opening Simulation does not work in Creo 4 and EMX 10 [RM-4497]

10.0 F000 2017-27-02-01