Changelog

10.0 M022 2018-12-07-01

Bugfixes

• Issue fixed: Bug #: Warning "Can't Read Partnames File" appears in case partname file is not writeable and missing partname entries should be added to part name file. [RM-7322]
• Issue fixed: Copy to Clipboard in BOM Dialog is not working correctly. [RM-7259]
• Issue fixed: Crash when creating new project with stored template assembly from archive path. [RM-7224]
• Issue fixed: Component type specific post regen relations are not passed to components. [RM-7152]

10.0 M021 2018-10-11-01

Enhancements

• Unicode characters are supported for filenames, parameter names and parameter values [RM-6798] [RM-6789]
• "Use One Model Rail" can be modify in Plate Dialog, The EMX Option USE_ONE_MODEL_RAIL only sets the default value. [RM-6289]
• Add new MEUSBURGER cooling component E20749 and E2074D. [RM-6717]
• Allow arrow keys in BOM to activate current cell and re-enter neighbored cell [RM-6385]
• Create button to reset component dialog settings from emx roaming folder. [RM-6028]

Improvements

• Manual edited entries of the BOM are not desginated by a "*"-character, An Asterisk-Icon is used instead [RM-6327]
• The EMX Option ENABLE_MULTI_EJP should be a check box in Ejector Component Dialog.
• When assembling screw UDF SCREW_CB is placed on REF_PLANE, use RAY_PLANE instead [RM-6947] [RM-6504]

Bugfixes

• Issue fixed: Centering sleeves are assembled in opposite direction [RM-6803]
• Issue fixed: EMX Options SAVE_SIZE_IN_EMPTY_ORD_NUMBER is not working with Option RECALC_SIZE_WHEN_OPEN_BOM activated. [RM-6946]
• Issue fixed: PITCH and THREADS_PER_INCH values are set to default values. COOL_PITCH from cooling_bore entries is ignored. [RM-6820]
• Issue fixed: Freeze Position IDs does not work correctly with position parameter written to part. [RM-6806]
• Issue fixed: Counterbores of Meusburger E1367 locating ring is not regenerating for some instances. [RM-6804]
• Issue fixed : When define Sprue Bushing, if the Offset value is a negative number and its absolute value is equal to (or bigger than) K-value, then there is not cut created in the plate. [RM-6709] [SPR-7587367]
• Issue fixed: In case points of ejector pins are below trim surface it is not possible to select a valid ejector length. [RM-6696]
• Issue fixed: In case user clears Project Prefix or Project Name in Project Dialog input panel, names are always reset. [RM-6704]
• Issue fixed: Confusing behavior when changeing screw types [RM-6536]
• Issue fixed: Relations in guide component template guide_e1110.prt are incorrect [RM-6301]
• Issue fixed: With new localized EMX Options, some text descriptions are incorect. [RM-6401]
• Issue Fixed: Sorting BOM by Parameter values from column header does not work as expected. [RM-6292]
• Issue fixed: Incorrect groove diameter for PARKER nitrile o-ring. [RM-6286]
• Issue fixed: Arrows (flow in and flow out) from cooling components without counterbore are incorrectly positioned [RM-6175]
• Issue fixed: Cool Plug UDF in Hasco Z942 is duplicated when modifying component position. [RM-6719]
• Issue fixed: Ball plug offset Meusburger E2071 is not set up correctly in case udf dimension value is modified. [Bug #6707]
• Issue fixed: While Modifing Components from Moldbase Definition, types are not updated correctly in any case. [RM-6706]
• Issue fixed: In EMX Options Dialog validate cell content, avoid, spaces, invalid characters. [RM-6657]

10.0 M020 2018-09-07-01

Bugfixes

• Drawing Areas of Moldbase Definition Dialog not visible in Creo 5.0.2.0 [RM-6937]

10.0 M014 2018-07-03-01

Bugfixes

• Issue fixed with placeholder "pos_id" Option PART_RENAME_FORMAT

10.0 M014 2018-06-28-01

Enhancements

• In Plate Dialog a third visibility option "visible locked" is now available, which allows user to lock a resumed feature within the plate. It will no be suppressed during size change of the plate. [RM-6611]
• Clamping slots are now available for LKM side gate moldbases. [RM-6476] [SPR-7559604]
• Introduce new validated cut out udfs for ejector pins. Rework variable option behavior. [RM-6569]
• Update MEUSBURGER plate catalog to latest state of March 27th 2018. [RM-6230]
• Update KNARR ejector, guides, component data to the latest state June 14th 2018. [RM-5933]
• New udf cut out images for Cooling, Guides, Dowel Pins and Ejectors. [RM-6227]
• Add new EBERHARD ejectors 6116, 6118, 612R, 6143, 6178, 6261, 6271, 6281, 6331, 6335, 6341, 6351, 6361, 6371, 6381, 6441 and 6622. [RM-5843]
• Add new STRACK side interlocks W44, Z38 and Z46. [RM-5467]
• Add EMX Functions to Creo 4 Quick Access Toolbar. [RM-6152]
• Keep selection of selected datums when defining a new component. [RM-5291]
• Add new STRACK spring components SN2520, SN2540, SN2560, SN2580 and SN2590. [RM-5465]
• Add new STRACK urathane springs SN2600 and SN2625 [RM-5465]
• Cutout data for Progressive ESTW-ejector sleeves is incorrect [RM-6294]

Improvements

• Make sure Ejector Pin Option TRIM and AUTO_LENGTH are not used at the same time. [RM-6590]
• In Ejector Pin dialog add icons to rotation fixture option menu. [RM-6507]
• Allow PLATE_THICKNESS as keyword in rules of feature_data.txt. [RM-6428]
• Add GROOVE feature to plate_5_es template. [RM-6429]
• Updated STRACKk ejector component data. [RM-5457]
• Nominal values for DME stop disc SB are not correct Bug [RM-6274]
• Increment name from ejector pins are not correct when placed in subassemblies. [RM-6189]
• Some improvments in Component Editor GUI.

Bugfixes

• Issue fixed: Ejector pin preview sketch udfs does not support rotfix angle. [RM-6626]
• Issue fixed: On trimmed ejectors, in case distance from head surface to trim surface exceeds nominal ejector length, ejector is incorrectly extended to invalid length, which does not fit order number. [RM-6340]
• Issue fixed: While trimming ejector pins, trim quilt surface is not found correctly in case of edge cases. [RM-6275]
• Issue fixed: BUW_BOM_MANUAL Parameter is overwritting existing EXCEL_IGONRE and BUW_INCLUDE_IN_BOM setting. [RM-6373]
• Issue fixed: Japanese Project Name display garbled characters in model tree. [RM-6372] [SPR-7397766]
• Issue fixed: Relation in screw_7-templates are wrong [RM-6316]
• Issue fixed: Cutout data for Progressive ESTW-ejector sleeves is incorrect. [RM-6294]
• Issue fixed: Ejector pin instance is not found with COLOR added to nonimal values. [RM-6240]
• Issue fixed: Colors of surfaces are not applied on both surface sides [RM-6287]
• Issue fixed: Values of the guide counterbore cut outs are wrong for dme-moldbases larger 396x396. [RM-6277]
• Issue fixed: Problems while assembling Auto screws on misumi locating rings. [RM-6229] [SPR-7533175]
• Issue fixed: For Eberhard blade ejectors the A and B values of the squared tip need to be flipped. [RM-6209]
• Issue fixed: Dowel pin cut out images are not correct for CounterboreTop-BlindholeBottom and CounterboreBottom-BlindholeTop. [RM-6205]
• Issue fixed: Option SAVE_SIZE_OF_PART_IN_EMPTY_ORDNUMBER is not working correctly. [RM-6190]
• Issue fixed: Pos id in PART_RENAME_FORMAT is not replaced correctly. [RM-6191]
• Issue fixed: Strack cooling extension Z7714 has incorrect cut out definitions. [RM-6178]
• Issue fixed: Cooling component Meusburger E2300 has incorrect orientation plane defined. [RM-6171]
• Issue fixed: Cooling component Meusburger E2318 has incorrect cut out. [RM-6169]
• Issue fixed: Components assembled on inverted surfaces in case placement surface is created by published geometry. [RM-6137]
• Issue fixed: With PRO_LANG set to "Chinese_Taiwan.950" emx uses incorrect encoding. [RM-5325] [SPR-6248970]
• Issue fixed: Japanese Project Name display garbled characters in model tree [RM-6372] [SPR-7397766]
• Issue fixed: Ejector pin instance is not found with COLOR added to nonimal values [RM-6240]
• Issue fixed: Components assembled on inverted surfaces (e.g. created by published geometry) are assembled in opposite direction [RM-6137]
• Issue Fixed: No default partname entries for cooling meusbruger E2081, E2082 and E2088. [RM-6165]
• Issue Fixed: When Modifying screws the thread depth information is not initially painted.[RM-6309]

10.0 M013 2018-03-14-01

Enhancements

• Implement STRACK side interlocks Z38, Z46 and W44 [RM-5467]
• Add Add Agathon top interlocks 7992 and 7993 [RM-5943]
• Add Meusburger component top lock E1311 [RM-5523]
• Add component HASCO circlip Z67 [RM-4975]
• New HASCO hoistring Z715 and Z725 added. [RM-6003]
• New HASCO guide components Z016 and Z025 added. [RM-6003]
• New HASCO ejector pins Z400, Z410, Z492, Z4655 and Z4656 added. [RM-6003]
• Update instances of HASCO guide components Z011, Z012, Z013 and Z022. [RM-6003]
• Update instances of HASCO screw Z31 and Z32. [RM-6003]
• Update instances of HASCO ejectors Z40, Z41 and Z42. [RM-6003]

Improvements

• Enable options CREATE_LAYERS_PER_PART and CREATE_GROUP_LAYER again [RM-4217]
• Avoid Size-Change-Warning message if no components exist when modifying size in Moldbase Definition [RM-6043]
• Make sure toplocks are displayed properly even if depth values are not defined in dat-file [RM-6042]
• The color props Intensity and Ambient should be set to 100 when setting technology colors [RM-6102] [C-14031621]
• The value for CUT_CB_DIA of Hasco Z1000 bush should be shoulder-diameter+1mm [RM-6080]
• With AUTO_SAVE_LAST_COMPONENT for cooling components the bore depth value is possibly incorrect [RM-6004]
• When manually modifing Plate thickness to non standard value. in 3+1 Pattern 4
• Reduce row default row height in cut out table of component dialog. [RM-5936] equal guide components are assembled during update of dependent components [RM-5977]

Bugfixes

• When adding new plate between two existing plates guide components are temporary painted in wrong position [RM-6034]
• When assembly library assemblies freely, without assembly reference, subcomponents, subcomponents are not renamed correctly [RM-6006]
• The ejector plate dimensions in some bigger Meusburger-sizefiles are wrong [RM-6078]
• Make sure to set correct BUW_ORD_NAME component parameter in second rail [RM-5666]
• When calculating cooling bore overlap value ... nominal values such as R1/8 etc. are not considered properly [RM-6048]
• Creo Parametric 3.0 exits prematurely when selecting Assembly Definition in specific assembly in EMX 9.0 [RM-5500] [SPR-5258833]

10.0 M012 2018-02-05-01

Enhancements

• Allow export of waterlines with centerlines for MOLDFLOW analysis. [RM-5901]
• Add Option to tag ejector bores with parameter BELONGS_TO_WATELRINE to make it visible vor mold design wall thickness check. [RM-5810]
• Provide a pulldownlist in the Component Editor to define CUTQUILT-specific parameters. [RM-5765]
• Allow usage of Creo-Component Interface in EMX library components. [RM-2809]
• Improve handling of Standardparts when working with Windchill. [RM-5793]
• STRACK plate catalog updated. [RM-5464]
• New Button in Ejector Pin Designer: Placement of ejector pins on existing points implemented [RM-5024]
• New AGATHON top interlock 7990 added. [RM-5482]
• Allow predefined dowel pin offset in component dat files. [RM-5572]

Improvements

• In the udf cut out table for cooling components important D5 and T5 value should always be first in list. [RM-5849]
• Speed up assembly time for ejector pins if they are defined on multi points features with multiple/patterned reference models. [RM5751]
• Add and verify OMNI sliders. [RM-4801]
• Add and verify D-M-E inch components, baffles and jiffy locks. [RM-5011]
• Improve DMS insulation plates and locating rings. [RM-5579]
• Meusburger cooling extension E2018 needs to be assembled and cutted like Hasco Z90. [RM-5924]
• Meusburger screw E1220 does not have an default offset value. [RM-5922]

Bugfixes

• Issue fixed: KNARR flat ejectors have flipped A and B values. [RM-5916]
• Issue fixed: KNARR ejector 33111 has incorrect head value. [RM-5921]
• Issue fixed: Setting bore colors does not work properly if arrows are included in Waterline Designer. [RM-5637]
• Issue fixed: When modifying a library component assembled in a subassembly, the incorrect assembly is displayed in the dialog box. [RM-5891]
• Issue fixed: Meusburer Screw E1240 has incorrect cutout values. [RM-5939]
• Issue fixed: Meusburger E1510 support pillar has deprecated PRE cutout bore. [RM-5938]
• Issue fixed: Meusburger stop pin E5105 has incorrect cut out bore diameter. [RM-5937]
• Issue fixed: In Library parts even ich material in dat file is set to "?" EMX tries to define a material. [RM-5932]
• Issue fixed: Knarr ejector 37111 with options core pin and rotfix enabled has an invalid angle. [RM-5919]
• Issue fixed: Knarr ejector 37999: Options Corepin and Autolength are missing. [RM-5918]
• Issue fixed: When modifying a component by selecting its refgroup, references get lost. [RM-5672]
• Issue fixed: UDF cool_thread_single has wrong geometry if point is not on surface. [RM-5673]
• Issue fixed: Ejector naming is incorrect when modify trimmed ejectors on multi point feature. [RM-5733]
• Issue fixed: Crash while modifing a component and no reference group exists. [RM-5770]
• Issue fixed: Wrong BOM_NAME after modifictaion of rails. [RM-5666]
• Issue fixed: Wrong position of datum plane wiht stripper plane. [RM-5719]
• Issue fixed: Delete all cooling function deletes all models if no cooling component is defined. [RM-5722]
• Issue fixed: Split comp_data.txt files is not working if it is not in EMX installation. [RM-5623]
• Issue fixed: IGES export for assemblies is incorrect. [RM-5611]
• Issue fixed: Missing buttons "Copy drawing" and "Drawing pulldown" in library dialog box. [RM-5594]
• Issue fixed: Inactive plate_material.txt file in plate dialog. [RM-5573]

10.0 M011 2017-10-25-01

Enhancements

• MEUSBURGER dat files updated to latest state of product data (15 October 2017).
• New MEUSBURGER compact slider sets E3080 with E3082/E3084 added. [RM-5032]
• New MEUSBURGER compact slider sets E3072 with E3074/E3076/E3078 added. [RM-5032]
• New MEUSBURGER compact slider sets E3070 with E3074/E3076/E3078 added. [RM-5032]
• New MEUSBURGER compact slider sets E3360 added. [RM-5032]
• New MEUSBURGER compact slider sets E3330 added. [RM-5032]
• New MEUSBURGER compact slider sets E3300 added. [RM-5032]
• New MEUSBURGER library component E2730 [RM-3634] added.
• New MEUSBURGER knockouts E1516 and E1517 for FW moldbases added. [RM-5471]
• New MEUSBURGER component E1064 for FW moldbases added. [RM-5452]
• New MEUSBURGER FW and FB-moldbases with plate features added. [RM-5391]
• New MEUSBURGER library component E2682 added [RM-5447]
• New MEUSBURGER library component E2680 to library components added. [RM-5447]
• New MEUSBURGER library component E3049 to library components added. [RM-5447]
• New MEUSBURGER screw E1226 added.
• New MEUSBURGER slider component E3048 added. [RM-5447]
• New MEUSBURGER slider component E3047 added. [RM-5447]
• New MEUSBURGER slider component E3045 added. [RM-5447]
• New MEUSBURGER support pillar E1512 and E1513 added. [RM-5447]
• New MEUSBURGER slider set E30110 added. [RM-3635]
• New MEUSBURGER guides E1115, E11202, E11206 and E1170 added. [RM-5381]
• New MEUSBURGER screws E1225, E1251, E1252, E1274 and E1275 added. [RM-5381]
• New MEUSBURGER ejectors E1700DLC, E17103, E1710DLC, E17262, E17262DLC, E17264, E1727DLC, E1728DLC and E1742 added. [RM-5381]
• New MEUSBURGER dowel pin E1301 added. [RM-5381]
• New MEUSBURGER top interlock E1306 added. [RM-5381]
• New MEUSBURGER side interlock E1308, E1315 and E1320 added. [RM-5381]
• New MEUSBURGER locating rings E1367, E1372, E1377 and E1382 added.[RM-5381]
• New MEUSBURGER springs E1536, E15365, E1537, E15375, E1358, E15385 and E1539 added. [RM-5381]
• New MEUSBURGER guide E1115 added. [RM-5380]
• New MEUSBURGER guide for knockouts E1150 with predefined screws added [RM-4977]
• New MEUSBURGER support bushing MEUSBURGER E1662, E1663 and E1664 added [RM-4976]
• New MEUSBURGER cooling components USA-type E23xx added. [RM-4856]
• New STRACK ejectors R1628, R1634, Z6015 and Z6017 added. [RM-5457]
• STRACK cooling component files Z7713, Z7730, Z7744, Z7746, Z7750 updated. [RM-5455]
• New STRACK cooling components Z7714, Z7720, Z7725, Z7748, Z7771 added. [RM-5455]
• New STRACK guides Z69, Z68, Z4315, Z4085, Z4078-R, Z4078, Z4077-R, W35, W35-R, W33, W33-R, W32, W31, W30, W25, W24, W23, W21, W20 added. [RM-5433]
• New STRACK dowel pin R523 added. [RM-5456]
• New STRACK locating rings Z10, Z11, Z16 added. [RM-5459]
• New STRACK support pillars Z19 added. [RM-5460]
• New OPTIZ library components date stamps DATI1000, DATI200, DATI2900 and DATI3000 added. [RM-5447]
• KNARR dat files updated to latest state of product data.
• New KNARR guides 264180, 51001, 51003, 51011, 510110W, 51100, 51110, 511100W, 51112, 51113W, 51114, 51210, 51211, 51702, 51711, 51712, 51713, 51722, 51911, 51912, 51932, 51934 and 551110 added.
• New KNARR ejectors, loacting rings and screws added.

Improvements

• "MAIN_CUT" feature can be edited in MEUSBURGER P-Rails. [RM-5446]
• Add Arrows for waterline flow in UDFs instead of components. [RM-2332]
• Improve evaluation of cylindrical parts in outline calculation. [RM-5257]
• Cleanup Arburg machine data.
• Consider Parameters driven by relation in BOM dialog box. [RM-5511]
• Consider new HASCO locating ring names and add missing description in comp_data-files. [RM-5495]
• Provide new LG-calculation rule in datfiles as comment. [RM-5360]
• When opening EMX Options complement current partnames.cfg with missing entries from template partnames file. [RM-5389]
• Add chamfers to baffle cutouts and calculate component length by bore-depth. [RM-5360]
• Add leaderpin-cb in plate_1_es template for PEDROTTI g-types. [RM-5421]
• Add GROOVE feature in stripper plate IS for PEDROTTI catalog. [RM-5396]
• Add SMALL-RAIL cut for D-type rails of PEDROTTI. [RM-5420]
• Enable Features driven by options also for Library Components. [RM-5358]
• New icons in Project Dialog added.
• Allow locally stored references for components in subassemblies. [RM-5368]
• Add missing cooling bores values in configuration/bore_technology. [RM-2332]
• Enable ROTFIX_ANGLE for EP_FIXTURE_CUT in all metric ejector templates. [RM-5321]
• Add relation for sketch in EJP-UDF to display parameter NUM. [RM-5261]
• Remove HASCO Round moldbases and components. [RM-5341]
• Replace option ADD_CUT_IN_FACE_OWNER with a checkbutton in component dialog box. [RM-4875]
• Remove Option "Check Interference" from component dialog box. [RM-5234]
• Improve dialog opening time of BOM Dialog with large assemblies and EMX 10 with Creo 4. [RM-5348]
• Equipment buttons (Thermal Insulation, Knockout, Side Interlock etc.) moved to Component Overflow.

Bugfixes

• Fix connection issue with license server flexlm 11.10
• In EMX 10.0 M010, unable to create the screw with "Predefine Component" option. But EMX 10.0 F000 worked.[RM-5497][SPR-7014037]
• ANSI standard screws inserted in Expert Moldbase assembly displays dimensions in ISO standards [RM-5498] [SPR-5191259]
• Add missing Meusburger plate pictures. [RM-5352]
• Add missing cuts for shoulder screws in intermediate plates. [RM-5539] [SPR-7033948]
• Update local parameters before defining a new component or enter moldbase definition. [RM-5502][SPR-7012301]
• Unable to set another guide component from mold base definition dialog box in EMX 10.0 M010. [RM-5499] [SPR-7012124]
• Meusburger screw with spring washer dat file has incorrect E1585 instances.
• Subcomponents and subassemblies are not exchanged recursively. Introduce function to exchange models in case of subassemblies in EMX assemblies. [RM-5532]
• Crash if folder names in subdirectories library path are identical. [RM-5526]
• Crash if no instances are defined for a library component. [RM-5519]
• Dat file of subcomponent in library asssembly MEUSBURGER e1930 is not defined.
• Autoscrews on Spruebush are not updated when offset is modified. [RM-5504]
• Trimmed ejector pins disappears, if modified. [RM-5503]
• HASCO Z11 guide bush data and cutout is incorrect.[RM-5494]
• When working in different assembly levels, the stored placement references cannot be rebuild in Modify-mode [RM-5486]
• Ordering numbers of return pins and support pillars are not updated when changing mold base size from moldbase definition dialog box. [RM-5367]
• It's not possible to add balloon-notes in drawings [RM-5484]
• M8x0.75 Core bore diameter needs to be 7.2 with ISO standards.
• "&drw_page" parameter is always initialized with page 1 even if solid is not displayed on drawing [RM-5444]
• Show Waterline feature does not include Reference Model. [RM-5248]
• The orient plane reference is not rebuild properly when modify a baffle component [RM-5424]
• Correct core depth for stop disc bores in PEDROTTI ejector base plate [RM-5373]
• PEDROTTI mold bases use stop discs instead of stop pins. [RM-5373] [SPR-6981055]
• Ordering numbers of guide components are incorrect after changing mold base size. [RM-5367]
• Ordering numbers of support, ejector pins, screws and guides are incorrect after changing mold base size.[RM-5367]
• Parameter value alue is set back after editing with "Edit BOM Parameter"-dialog. [RM-5374]
• Flip of orientation in library dialog. Difference between preview and final assemble of component. [RM-5371]
• Incorrect cut outs in FH cavity part when a lifter is placed. Only the MH should be cutted [RM-3006]
• Consider negative regenerated dims when reading Dimensions from library components [RM-5359]
• Not all possible *.rel-files are evaluated [RM-5357]
• HASCO Z13 data is incorrect. [RM-5355]
• Tolerance with initial "+" befor the number is not considered correctly.
• Avoid double cooling bores with option ADD_CUT_IN_FACE_OWNER enanbled. [RM-4875]
• Use invers values for THREADS_PER_INCH and PITCH in cosmetic threads [RM-5350]

10.0 M010 2017-09-08-01

Improvements

• Improvement of BOM export to EXCEL

Bugfixes

• For Library Components with subcomponents instances are not read correctly from dat file [RM-5481]
• Cut outs are not created in case ray trace function intersects with edge [RM-5378]
• Fix in Assemble predefined screws: Line was removed during manufacturing.

10.0 F001 2017-09-13-01

Enhancements

• When working with ADD_COOLING_REF_IN_PART, make sure Parameter BUW_PROJECT_SHORT is in all plates [RM-5204]
• Allow usage of two additional measurement planes as placement constraints [RM-5129]
• Allow UDF's in components with parameter BUW_GUIDE [RM-5126]
• Save thread depth and bore depth for predefined screws [RM-5125]
• Enable usage of partname-wildcards <partid_refx> also for predefined components [RM-5108]
• Increase number of allowed characters in EMX Options>Part Names>Partname-Column from 32 to 50 characters [RM-5107]
• BOM: Show how many objects were found with search panel [RM-5052]
• Add new Hasco side interlock Z09 [RM-4973]
• Add component HASCO guide bush Z14W [RM-4861]
• Implement new Rabourdin guide components 1071, 1005, 1061, 651, 671 and 601 [RM-4813]
• Update screw length when changing plate thickness [RM-4718]
• Knarr Ejector Pins: Add Round Types 37711, 33111 [RM-4610]
• Add components KNARR ejector sleeves 38488, 38781, 38882 [RM-4581]
• Add components KNARR core pins 37121, 37411, 37666, 37418 [RM-4580]
• Enable custom parameter Values in EMX BOM Balloons [RM-4399]
• Rework layer concept in EMX: Rule-driven layers etc. [RM-4217]
• Add Progressive x-style side locks SLX [RM-3649]
• Add new Stäubli cooling components (E28xx) [RM-3066]
• Enable moving of Inserts to the insert-subassemblies in Cavity Layout [RM-3036]
• NR_DIGITS_BOM is not considered in plate ordering numbers [RM-5250]
• When Modifying Assembly with auto lib threads, delete and recreate the auto lib threads [RM-5168]
• Show new columns for color transparency in Option/technology-dialog box [RM-4982]
• Allow usage of EMX10 dat-files combined with EMX9 udf_data-file [RM-5259]
• Add Latchlock MEUSBURGER E1840 (Round) [RM-5029]
• Add new STRACK compact slider sets: Z4290 [RM-5033]

Bugfixes

• When Modifying component and supplier is changed, name is not updated. [RM-5275]
• Inherited colors of cut-quilts are not applied to ref-patterned cutouts [RM-5269]
• C13777197: Machine Bar Pattern in Machine dialog box cannot be driven like other patterns [RM-5263]
• Enable VarParameters for UDF's to display the Ejector Pin Parameter PARTID in the plate that has the ejector head cut [RM-5261]
• OFFSET for ejector rotfix1 is wrong so chamfer fails [RM-5251]
• When open BOM dialog box, visible components are listed in the hidden block [RM-5249]
• Geometry of Ejector pin E1712 and its head-cutout is wrong [RM-5247]
• Duplicate message GUI emx_tip_preview_ce in emx_gui_messages.txt [RM-5246]
• Hasco Z10 guide bush toggle orientation when changing moldbase size [RM-5221]
• External Data of Smart Holechart gets lost when renaming parts [RM-5206]
• When modifying parts with RMB in old 4.1 moldbase-assemblies, EMX crashes [RM-5203]
• Multiple usage of preview button does not reset the display style [RM-5191]
• The template file "rule_layers.prt" is saved several times in configuration/templates [RM-5172]
• Allow coloring of the UDF auto_libthread [RM-5140]
• Simulation object roles, delay and stroke values of latchlocks are not update while modifing components [RM-5138]
• Correct setting of LATCH_DELAY and LATCH_STROKE-Parameters for Simulation [RM-5132]
• The model list of Mold Base Opening Simulation dialog box is not emptied when closing the dialog [RM-5130]
• The sketch cool_plug_symbol is not added to plates when defining a pipe-plug component [RM-5106]
• Shoulder values LG2 for EHS-ejector pins are wrong [RM-5105]
• When defining cooling comps in partmode, cooling comps are assembled multiple times [RM-5081]
• Finish incomplete data for Knarr ejector pin 37414 [RM-5073]
• Avoid crash when draw incomplete csys-patterns in Moldbase Definition [RM-5071]
• Cavity Layout Dialog: Cannot selection placement coordinate system of second, third cavity assembly [RM-5053]
• Copy/Paste in BOM does not work robust in drawing mode [RM-5039]
• Wrong usage of the term "Stücklistennummer/BOM Number" for Balloons [RM-5038]
• Check model quality and order numbers of HASCO slidersets [RM-5031]
• Latchlock HASCO Z170 (simple), Z173 (round), Z174 (flat): Models are inapporiate and need to be remodeled, Check References and Nominal Dimenesions [RM-5030]
• Latchlock MEUSBURGER E1820 (flat) Models are inapporiate and need to be remodeled, Check References and Nominal Dimensions [RM-5028]
• Latchlock Strack Z3 (round) and Z4 (flat): Models are inapporiate and need to be remodeled, Check References and Nominal Dimensions [RM-5027]
• Modify of predefine AUTO_SCREWS and AUTO_PINS in EMX10 cause crash [RM-4955]
• Opening Simulation does not work in Creo 4 and EMX 10 [RM-4497]

10.0 F000 2017-27-02-01