Changelog

10.0 M054 2020-09-25-01

Enhancements

• Implement command to calculate outline for all models in assembly and update &size parameter [RM-10255]
• Highlight all changed size values in BOM in case all models size are recalculated. [RM-10291]
• Introduce Button in BOM to calculate size for selected models on right mouse button. [RM-10292]
• Add default parameter value &drw_exists to write drawing existing status to models. [RM-10296]
• Implement button on right BOM mouse menu to reset changed size to current parameter value. [RM-10301]

Bugfixes

• Issue fixed: Crash when updating patterns in mold bases with assembly cuts. [RM-10275]
• Issue fixed: When modifying library assemblies which are created by component editor part names rules of sub components are incorrect. [RM-10276]
• Issue fixed: Regression in BOM_BALLOON_CUSTOM_PARAM. Part parameter of type string can not be written. [RM-10287]

10.0 M053 2020-08-27-01

Bugfixes

• Issue fixed: EMX Command Pneumatic components not avavilable in ribbon.

10.0 M053 2020-08-25-01

Enhancements

• New EMX Commands for Hydraulic and Pneumatic components. [RM-5448]
• New dialog to delete all components of selected type. [RM-6079]
• IGES, STEP, DXF export in BOM Dialog works with Windchill and active workspace. [RM-7497]
• Introduce new Option SOLID_TOLERANCE_STANDARD to allow user to specify the solid tolerance mode. [RM-7901]
• Add Options to automatically created chamfers in UDFs for all kinds of components. [RM-8991]
• Implement command to transfer surface parameter from reference parts to mold volume extracts. [RM-9894]
• Add MEUSBRUGER guides E5140, E5152 and E5202. [RM-9900]
• Update MEUSBURGER components to latest state: 2nd quarter 2020. [RM-10028]

Improvements

• Improve cutout creation in case cooling components are placed on flat reference surface, but ray hits angular surface. [RM-9736]
• Implement way to check for multiple types of licenses (Advanced and Standard) in license.ini.[RM-10026]
• BOM_BALLOON_CUSTOM_PARAM works with component parameters as well [RM-10081]

Bugfixes

• Issue fixed: Missing entries in bore_screw.cfg for 1.4 and 1.6 mm bores. [RM-9633]
• Issue fixed: Problem in Knarr insulation plate 77336. [RM-9668]
• Issue fixed: "G" Character is missing in for non-ISO mm threads, instead "M" is displayed. [RM-9716]
• Issue fixed: In case insert mode is activated and insert position is below or inside of a group, the new reference and cutout UDFs will be assembled inside of UDF. [RM-9734]
• Issue fixed: Eyebolts two features in cavity plates are not centered. [RM-9760]
• Issue fixed: Missing Transparency in color of EMX plates. [RM-9792]
• Issue fixed: Issue with counter bore depth value in flat head auto screws. [RM-9821]
• Issue fixed: Invalid relation in template file of guide_e1144. [RM-9833]
• Issue fixed: Unable to change thickness of Meusburger Side Interlock. [RM-9883]
• Issue fixed: Length and Width values of standard plates can be change when Special shape is set. This can lead to incorrect order numbers. [RM-9985]
• Issue fixed: Ejector pin Symbols are only created on one cavity insert. [RM-9987]
• Issue fixed: In case mold base size changes and option keep plate thickness is set, in case no valid instance was found order number changes to P plate. [RM-9994]
• Issue fixed: In case model is tagged as purchased part in BOM, sub comps are still listed in Repeast region on drawing. [RM-10007]
• Issue fixed: In case of option pattern on all models and models are assembled on symmetric angles analysis feature in refgroup fails. [RM-10012]
• Issue fixed: Problem with EJP_ORIGIN_MOLDBASE coordinate system in assembly when placeing ejector pins. [RM-10027]
• Issue fixed: Add missing counterbore in meusburger guide components E1100 and E1105. [RM-10034]
• Issue fixed: Wrong GUIDE_BORE_LEADERPIN_SPECIAL diameter in plates meusburger F55. [RM-10109]
• Issue fixed: In case ejector pin is defined on multi point feature and partname is e.g. 29 chars it can occur that individual partnames can not be created. [RM-10143]
• Issue fixed: Regression: Option USE_SHORT_NAME_TRIM_EJP does not work correctly. [RM-10144]
• Issue fixed: References in Rotfix features of ejetor pins need to be verified to avoid failing of feautres when rotfix rotation value is edited. [RM-10145]
• Issue fixed: In case option EXCL_SIZE_CALC_PARAM is used, the size format includes an additional "=". [RM-10165]
• Issue fixed: Dimensions of sub components are not set correctly when archiving instances of assemblies in Component Editor. [RM-10169]
• Issue fixed: In case Modfiy Project is run on an active Workspace, the drawings are not correctly renamed. [RM-10170]
• Issue fixed: In case drawings is created during project modification with active Windchill, there are still ghost objects of skeleton and machine in workspace. [RM-10173]

10.0 M052 2020-04-29-01

Enhancements

• Ejectors: Add note "trimmed" or "auto_length" to NOTE Parameter for ejector pins. [RM-6403]
• Enable multi-page export of DFX-files in BOM. [RM-7499]
• New STRACK guides implemented [RM-7541]
• Parameters of the mold models are copied to duplicated cavity assemblies when using Duplicate Cavity under EMX Manufacturing Mode [RM-8898]
• New inch DME Ejector Pins implemented [RM-8918]
• Add functionality to use EMX Parameters in PART_RENAME_FORMAT configuration option [RM-8919]
• Implement general solution to add numbers into USER_NUMBER with changing the dat files by usuing the config file cusomer_numbers.cfg [RM-8990]
• Change the Ejector UDF´s from counterbore depth to real guide length. [RM-9289]
• New DME side interlock BGS. [RM-9442]

Improvements

• Use COOL_HALF_ANGLE in cooling cutout values instead of fix value. [RM-6386]
• Improve "sel_list.txt" behavior in combination with "supplier.cfg". [RM-6394]
• Shortened baffle length is only writtten to NOTE Parameter for Meusburger E2100. Do it for all baffle components [RM-6427]
• Improve beahvior: In some parts it can occur, that the screw option THRU_ALL is cutting not to the next surface, but throught the whole model. [RM-7616]
• Plate feature dimensions can now be locked and are not set back in case of size change. [RM-7994]
• Apply SMARTColor udfs from mm to inch, Add EMX_SURFACE_FUNCTION parameter to inch plate templates. [RM-8692]
• In case clamping plate changes from F10 to F20 the insulation plate is not automatically updated. [RM-8895]
• Also Update all cutout UDFs in Update Ejector Pin Dialog. [RM-9305]
• Update existing MEUSBURGER E-components to latest state: 1st quarter 2020.
• Update existing MEUSBURGER P and F plates to latest state: 1st quarter 2020.

Bugfixes

• Issue fixed: Component Editor - Cut quilt surfaces in subcomponents are not listed in table (e.g. Slider). [RM-6387]
• Issue fixed in Meusburger Babyplast. [RM-6655]
• Issue fixed: Negative plate clearance value should not be allowed, stock allowance is displayed invalid while modifying a plate [RM-8115]
• Issue fixed: In case Layers are create per PART and component is patterned, only the pattern header is added to the layer.[RM-8373]
• Issue fixed: Material to part is not set if the material parameter is processed in BOM. [RM-8772]
• Issue fixed in Update Ejector Pins Dialog. [RM-8886]
• Issue fixed: Crash in case no PTC Tool Design Option license is availabe and ejector pin should be trimmed with Trim feature. [RM-8887]
• Issue fixed: For moldbase Mesburger/Type3, if choose P plate to replace default one, some holes are also displayed. [RM-8892] [SPR-9510062]
• Issue fixed: EMX Warning about "Cannot find a matching instance as a replacement for the guide component." will prompt when trying to load futaba moldbase. [RM-8896] [SPR-9431001]
• Issue fixed: In case BOM position ids are frozen and a plate is modified in assembly defintion the position id is manipulated [RM-9138]
• Issue fixed: Assemble again with the option NAME_SUBASM_COMP default references are not set [RM-9145]
• Issue fixed: PRYSLOT features for Meusburger plates can sometimes not be regenerated in case the plate thickness is modified. [RM-9147]
• Issue fixed: Load moldbase "futaba_h/HA-type", the cutout of the 3rd guide isn't created. [RM-9255] [SPR-9632843]
• Issue fixed: Unable to create vertical waterline in Waterline Designer with error "Failure Diagnostics" [RM-9256] [SPR-9635168]
• Issue fixed: Problems with Meusburger Stop Disc E1500 screws. [RM-9265]
• Issue fixed: It is not mossible to jump bewteen the the selected lines in the BOM using the arrow keys. [RM-9351]
• Issue fixed: Crash in case skeleton model is manually deleted by user and Moldbase Definition Dialog ist opened [RM-9368]
• Issue fixed: In case individual dat files are placed in EMX_USER_CONFIG_PATH folder and _types.txt file is active, all other dat files from default installation are ignored .[RM-9467]
• Issue fixed: Visible locked features not working correctly on rail models. [RM-9497]
• Issue fixed: Unable to set Shoulder height to 2 inch for Cyl head shouldered ejector pin. [RM-9527] [SPR-9914500]
• Issue fixed: Prefix ist not set correctly for subcomponents in Library component assemblies while modifying. [RM-9532]
• Issue fixed: Components with manually changed names which still include prefix are renme to old name in case components is modifyied and the size will be changed. [RM-9542]
• Issued fixed: PTC waterline features are not colorized in Show Waterline command when exporting waterline model. [RM-9547]
• Issue fixed: Images in Component Dialog and not correctly displayed when initially starting the dialog and the screen resolution is smaller the the initial dialog height [RM-9551]

10.0 M051 2020-01-13-01

Enhancements

• New function in Bill of MAterials: Delete all Balloons on Drawing with one click [RM-6237]
• STRACK component catalog updated [RM-9166]

Improvements

• Implement plausiblity check for cooling diameter values [RM-8944]

Bugfixes

• Issue fixed: Multiple problems with DME inch mold bases [SPR-8288021] [RM-8371]
• Issue fixed: In case 3+1 Pattern for guides is set and F Palte is switched to P plate the guide bores on second pattern ar e not surpressed. [RM-8885]
• Issue fixed: There is no dimension listed in detailed image and no "Size" nominal dimension available for hasco/single_locking Slider [SPR-9433504] [RM-8897]
• Issue fixed: Correct counter bore depth for flat head screws DIN 7894 [RM-9157]
• Issue fixed: If the option PRE_HIGHLIGHT_BEFORE_DELETE is set, the section is highlighted twice when deleting a component. [RM-9165]
• Issue fixed: Cooling components with option assembled on all models enable are assembled to often with component status [RM-9173]

10.0 M050 2020-01-09-01

Bugfixes

• New set of udfs have incorrect relation BENENNUNG=rel_modelname() which is added to all models, the UDFs are assembled to. [RM-9245]

10.0 M040 2019-09-27-01

Enhancements

• Implement new HASCO screws Z34, Z351, Z371, Z372, Z3721, Z721. [RM-8553]
• Implement new HASCO sprue bushing Z510, Z530. [RM-8553]

Improvements

• Improve messages in case of invalid license and invalid creo version. [RM-7335]
• Move Technology Colors Button in Ribbon from Preparation group to EMX Tools in Part Mode [RM-6656]

10.0 M033 2019-09-02-01

Enhancements

• EMX is now ready to be used with B&W SMARTColor. [RM-7943]
• Update HASCO Plates. [RM-6557]
• New STRACK Z4 latch lock. [RM-7540]
• New KNARR plates knarr_f (MEUSBURGER compatible) and knarr_k (HASCO compatible). [RM-7815]
• New KNARR guide components 551000, 551000DLC, 551010, 551010DLC, 551100. [RM-7815]
• Enable Spinbox in nominal values table of Component and Library Component Dialog to set minimal and maximal values [RM-8278]
• New Button with weblink to component data sheet in Component Dialog. Implemented for MEUSBURGER, HASCO,STRACK, KNARR [RM-8402]
• New KNARR ejector pins 39111, 39111DLC and 39414 [RM-8409]
• New KNARR insulation plates 77335 and 77336. [RM-8511]
• Show cooling threads not only with cosmetic thread but also with additional surface. [RM-7013]
• Rename quilt cut UDF group by parent model name. [RM-7425]

Improvements

• Improve shoulder screws functionality. [RM-7878]
• Designate screw_bore and cooling_bore entries as INCH or MM thread. [RM-8669]
• Component status should be enabled by default [RM-7762]
• Component editor - When adding a component with family table the nominal dimensions are not automatically listed [RM-7392]
• Do not set Option DEFAULT_WATERLINE_DIA to 8 mm. Set it to "-" instead. [RM-8383]
• Copy parameter from EMX_SURFACE_FUNCTION from quilt surface to cut surface. [RM-8397]
• Introduce additional ray algorithm for all kinds of components when searching for intersecting models [RM-8590]

Bugfixes

• Issue fixed: Components assembled from top assembly to top_sub_sub assembly loses reference when modified in top_sub assembly. [RM-6242]
• Issue fixed: MEUSBURGER pryslot features have invalid geometry.[RM-6397]
• Issue fixed: Ejector length is not calculated correctly if an offset is added to the ejector [RM-6398]
• Issue fixed: In case NAME_SUBASM_COMP option is active, predefined screws are not assembled to NAME_SUBASM_SCREW assembly [RM-6399]
• Issue fixed: Radius in Meusburger E1702 is not set correctly. [RM-7975]
• Issue fixed: Wrong screw core dia in DIN flat screws. [RM-8063]
• Issue fixed: Guide Bush E1105 needs additional nominal instance DM1. [RM-8237]
• Issue fixed: Avoid error message when start EMX. [RM-8324]
• Issue fixed: "One plate" option is not available for din screw DIN7991. [RM-8328]
• Issue fixed: Problems with cooling components in INCH assemblies. [RM-8372]
• Issue fixed: Problems with screw components in INCH assemblies. [RM-8382]
• Issue fixed: Unable to create Mold Base of size 7.875 x 11.875 for A-Series. [RM-8385]
• Issue fixed: Incorrect orientation of Inserted Screws. [RM-8387]
• Issue fixed: Relationship import from .rel files are wrong if converting is not UTF8. [RM-8393]
• Issue fixed: In case Creo is minimized with Moldbase Definition dialog open, Creo is set to a white screen. RM-8408]
• Issue fixed: Double and integer parameter values predefined at component templates are not recognized and overwritten by default values. [RM-8424]
• Issue fixed: Curves and components assembled with the Waterline Designer have a rotated position in case of invalid default coordinate system.[RM-8442]
• Issue fixed: Crash after second saving component dat file with Component Editor. [RM-8447]
• Issue fixed: Component drawings are always created even if CHECK_DWG_TYPES is disabled. [RM-8486]
• Issue fixed: Return Pins are not updated by Update Ejector Pins Dialog. [RM-8523]
• Issue fixed: The feature of cut_s in lifter E3246 is not correct. [RM-8533]
• Issue fixed: Assembly references can not be modified in AUTO_SCREWS. [RM-8552]
• Issue fixed: Turn Option is missing in E1144 guide components. [RM-8553]
• Issue fixed: Creo 6.0 with EMX 12.0 exits prematurely when changing Mold base size. [RM-8558] [SPR-8697407]
• Issue fixed: Failed to hide the machine part in the drawing view of EMX project assembly by Hide RMB command or layer status in EMX 12.0.0.0/11.0.2.0/10.0.0.0. [RM-8559] [SPR-8736403]
• Issue fixed: Crash in Show Waterline Dialog. [RM-8584]
• Issue fixed: Colors in Show Waterline Dialog have incorrect order when waterlines are defined with Waterline Designer. [RM-8589]
• Issue fixed: EMX crashes if cooling components are not selected (displayed) when creating waterlines in waterline designer. [RM-8591]
• Issue fixed: Ejector guide bush cutout incorrect if retainer plate ref distance > 0. [RM-8592]
• Issue fixed: When adding tolerances manually to cut out of UDF Dimension they are removed when modifying the component. [RM-8594]
• Issue fixed: Wrong display for holes in support pillar cutouts. D1 and D3 values inverted. [RM-8595]
• Issue fixed: Ejector Pin Designer does not work with auto sub assemblies (NAME_SUBASM_COMP) active. [RM-8598]
• Issue fixed: Working dir is changing when assembling Ejector Pins from Ejector Pin Designer. [RM-8602]
• Issue fixed: Incorrect angle "A" of HASCO Z01 pin. [RM-8627]
• Issue fixed: Dimensions for MEUSBRUGER insulation plate 1403 is wrong. [RM-8630]
• Issue fixed: Can not open drawings after renaming , [RM-8641]
• Issue fixed: Several issues in Update Ejector Pin Dialog [RM-8674]

10.0 M032 2019-06-05-01

Enhancements

• New Lifter E3244, E3246 and E32481. [RM-8236]
• Add new Option SHOW_CHAMFER to display all Chamfer in all plates. [RM-8327]
• Improve Runner Library Components [RM-8262]
• Introduce new configuration file which allows user to define custom order number rules depending on supplier, unit, type and file names. Can be edited in EMX Options. [RM-7118]
• Introduce new functionality to trim ejector pin head against each other. [RM-6728]
• Introduce new Update Existing Ejector Pins Dialog which allows user to update ejector pins in case the required reference distance has changed [RM-7199] [RM-7344]
• Improve the performance of parameter write and read functions. Assemble 240 ejector pins is 45% faster, Open the BOM Dialog is 40% faster and close the BOM Dialog is 55% faster [RM-6945]
• New MEUSBURGER cooling component O-Ring E21311. [RM-8057]
• New MEUSBURGER ejector pins E17003 and E1723. [RM-8057]
• New HASCO slide plates Z555, Z556 and Z557 [RM-7319]
• New and updated HASCO ejector pins Z412, Z4650, Z4651, Z4670, Z4671, Z413, Z443, Z457, Z461, Z465, Z44, Z441, Z45 and Z451 [RM-6552]
• New HASCO guides Z14 and Z1105. [RM-6558]
• New HASCO cooling components Z9430 and Z9400. [RM-6558]
• Show outline dimensions in model size dialog drawing area. [RM-6511]
• Allow user to toggle between Diameter x Length or XxYxZ value in Model Size Dialog. [RM-6724]

Improvements

• Waterline Designer: Components are always assembled to top assembly of working model. Auto cooling subassemblies are not considered. [RM-8293]
• Plate Dialog: Avoid interaction with plate features in case it is a standard plate. [RM-8113]
• Set Option SHOW_PRYSLOTS new default value to NO, use feature_data.txt values instead as default. [RM-8326]
• Duplicate Cavity: Use External Merge KE to create copies and avoid dependency with and modification of original manufacturing assembly [RM-8107]
• Ejector Pin Designer: Improve behavior of simplifier representation. [RM-8156]
• Improve Duplicate Cavity procedure to avoid invalid placement of reference parts. [RM-8219]
• Update DIN Screws. More lengths are now available. [RM-6307]
• Update existing MEUSBURGER E-components to latest state: 1st quarter 2019. [RM-8057]
• Remove deprecated HASCO screws Z30. [RM-6558]
• Updated HASCO screws Z33 and Z330. [RM-6558]
• Updated HASCO knockout Z02. [RM-6558]
• Updated HASCO locating rings K100, K107, K500, K501, K505, K506, K1000, Z7510 , Z7515, Z7520, Z7525, Z7530, Z7535 and Z7540. [RM-6558]
• Updated HASCO dowel pins Z25 and Z26. [RM-6558]
• Updated HASCO guide Z01, Z010, Z10, Z20, Z040, Z0100. [RM-6558]
• Updated HASCO cooling components Z94, Z940 and Z9661. [RM-6558]
• Model size algorithm improved: Some cylindrical parts are recognized as squared parts. [RM-6305]
• Improve calculation time of model size algorithm. [RM-7582]
• Partname default rules need additional "_" between name and id, e.g.

  BAFFLE<3id>. [RM-6425]

• Images and thumbnail image for Library Component Editor are not created with imagemagick anymore. This avoids possible issues while creating gif images. [RM-7581]
• Agathon top interlocks should automatically assemble screws with additional fastener cutouts. [RM-6108]

Bugfixes

• Issue fixed: Hasco Z35 Dowel pins cutout images are display flipped. [RM-6187]
• Issue fixed: Cooling cut outs can not be created in parts with assembly material cuts in case option ADD_COOLING_REF_IN_PART is set to YES. [RM- 7985]
• Issue fixed: Cut position for circlip in Hasco Z11 is incorrect. [RM-7973]
• Issue fixed: All components in old EMX 4.1 moldbase are deleted in case cooling component is deleted with EMX 10 and above. [RM-7939]
• Issue fixed: Offset value is incorrectly set when editing tolerance value in UDF Dimensions table [RM-7902]
• Issue fixed: Invalid UDF Dimension settings in Meusburger E2071 in case SECONDBORE option ist unchecked. [RM-7875]
• Issue fixed: Traceback while assembling ejector pins with component status dialog user is ask for trim surface. [RM-7847]
• Issue fixed: Drawing files are not found for library parts in case file name is defined capitalized, but file it self is named with lower characters. [RM-7823]
• Issue fixed: Delete toggle direction option for Stop Dics/Pins at all, because it is not working correctly. [RM-7822]
• Issue fixed: W value for RAIL_OFF feature of D plate of Pedrotti supplier is not correct with respect to the catalog [RM-7816] [SPR-8109506]
• Issue fixed: Open window title "Open comp_data.txt-file to split its content into separate *.dat-files" is not localized [RM-7656] [RM-8057258]
• Issue fixed: Dialog title "Main_Axis Position" is not localized for "Define Main Axis Offset" operation. [RM7655] [SPR-8057412]
• Issue fixed: Crash in Waterline Designer in case waterline is added to model with assembly material cut [RM-7587]
• Issue fixed: When assembling plates to the moldbase for some bores only one cylinder side gets colored. [RM-7584]
• Issue fixed: Files are not deleted from disc in case plate is deleted with "No Components" checkbox even if DELETE_FILES_AFTER_DELETE option is active. [RM-7585]
• Issue fixed: D-M-E Extension Plug JPB cannot be assembled correctly. [RM-6179]
• Issue fixed: Invalid position of placement surface in cooling component MEUSBURGER E2046. [RM-6163]
• Issue fixed: Hasco cooling Seal Plug Z942 should not have counterbore option. [RM-6180]
• Issue fixed: False entries for Dimension LG2 of Meusburger component E1115. [RM-7263]
• Issue fixed: with $Enviroment variables in EMX_USER_CONFIG_PATH are not replace. [RM-7603]
• Issue fixed: Classification function overwrites predefined parameters for cavity parts with defaults from partnames.cfg [RM-6532]
• Issue fixed: When placing cooling chanels in part mode invalid partname message appears. [RM-7660]
• Issue fixed: EMX is crashing when clicked on Options from "Administrator Tools" panel in Italian. [RM-7654] [SPR-8057371]
• Issue fixed: Component Editor is not overwriting existing dat files. [RM-7622]

10.0 M031 2019-01-25-02

Enhancements

• Add STRACK compact slider assemblies Z4290, Z4290L, Z4292, Z4293, Z4294, Z4294L, Z4295, Z4296, Z4296L, Z4298. [RM-5033]
• Add STRACK ejector pins R1628 and R1634 and update Z90, Z92, Z95 and Z98.
• Add HASCO Z330 torx set screw. [RM-7544]
• Update HASCO Insulation Plates Z121, Z121 with hole, Z1212, Z1213.
• Add MEUSBURGER cooling component E2112. [RM-7120]
• Add MEUSBURGER guide components E5000 and E5200. [RM-6308]
• Add MEUSBURGER ejector pins E1711 and E17264DLC. [RM-6550]
• Update MEUSBURGER components to state 4th quarter 2018. [RM-6882]
• Add DIN ejector pins DIN1530-D, DIN6751, DIN8405, DIN8693 and DIN8694. [RM-7498]
• Implement a direct Export to Excel Interface for the Bill of Material. [RM-7431]

Improvements

• Highlight BOM Item in Graphics window with one click instead of double click. [RM-7009]
• Readd old Hasco slider set "With retainer" [RM-6272]
• Highlight BOM Item in Graphics window with one click instead of double click. [RM-7009]

Bugfixes

• Issues fixed in MEUSBURGER cooling component E2110 [RM-7119]
• Issue fixed: Format file in Working directory is deleted when modifing Project. [RM-6452]
• Issue fixed: Thread is not created in plate, in case screw length exceeds plate thickness [RM-7428]
• Issue fixed: Check thread of Meusburger cooling component E2025. [RM-6204]
• Issue fixed: Some issues at Meusburger Cooling E2110. [RM-7119]
• Issue fixed: Angle for cooling component MEUSBURGER E2088 does not work. [RM-6166]
• Issue fixed: Meusburger plates have steel materials assigned without "1." prefix. [RM-7427]
• Issue fixed: In case assembly cuts exists in model tree, Bill of Material can not collect all models. [RM-5744]
• Issue fixed: mm Sliders do not have detail images. [RM-6607]
• Issue fixed: Ejector Pin Symbols: ejp holes and ejp symbol circles are not coaxial. [RM-6961]
• Issue fixed: Ejector Symbol have incorrect height in drawing views with different scale then drawing sheet. [RM-6963]
• Issue fixed: In case first bom item in BOM is edited with EditBOMItemDialog, parameters are incorrectly written to models [RM-7441]

10.0 M030 2018-12-20-01

Improvements

• Add a new config option which allows user to use layers for side views. [RM-7345]

Bugfixes

• Issue fixed: Changing of "project name" and "prefix" for Moldbase in EMX may delete drawing formats in working directory. [RM-7331] [SPR-7799658]
• Issue fixed: Strings for button caption are too long in "Component Editor" windows and truncation happened for localized client. [RM-6979] [SPR-7397756]
• Issue fixed: Crash when selectiong invalid node in tree of moldbase definition dialog [RM-6435] [SPR-3674069]
• Issue fixed: Waterline Designer: Crash when deleting waterlines defined on parts that are assembled twiche in the moldbase. [RM-7349]
• Issue Fixed: Mathmatical Expressions can not be evaluated in with Creo 5.0.3.0. [RM-7343]
• Issue fixed: When modifing component and current type is not available anymore in list of all types, incorrect type (first in list) is displayed. [RM-7338]
• Issue fixed: User Name can not be modified in Project Modify Dialog. [RM-6421]
• Issue fixed: In case the rule EJP_LL-RAY_THICK is replaced, the LL value in the ejector cutout is incorrect. [RM-7325]

10.0 M022 2018-12-07-01

Bugfixes

• Issue fixed: Warning "Can't Read Partnames File" appears in case partname file is not writeable and missing partname entries should be added to part name file. [RM-7322]
• Issue fixed: Copy to Clipboard in BOM Dialog is not working correctly. [RM-7259]
• Issue fixed: Crash when creating new project with stored template assembly from archive path. [RM-7224]
• Issue fixed: Component type specific post regen relations are not passed to components. [RM-7152]

10.0 M021 2018-10-11-01

Enhancements

• Unicode characters are supported for filenames, parameter names and parameter values [RM-6798] [RM-6789]
• "Use One Model Rail" can be modify in Plate Dialog, The EMX Option USE_ONE_MODEL_RAIL only sets the default value. [RM-6289]
• Add new MEUSBURGER cooling component E20749 and E2074D. [RM-6717]
• Allow arrow keys in BOM to activate current cell and re-enter neighbored cell [RM-6385]
• Create button to reset component dialog settings from emx roaming folder. [RM-6028]

Improvements

• Manual edited entries of the BOM are not desginated by a "*"-character, An Asterisk-Icon is used instead [RM-6327]
• The EMX Option ENABLE_MULTI_EJP should be a check box in Ejector Component Dialog.
• When assembling screw UDF SCREW_CB is placed on REF_PLANE, use RAY_PLANE instead [RM-6947] [RM-6504]

Bugfixes

• Issue fixed: Centering sleeves are assembled in opposite direction [RM-6803]
• Issue fixed: EMX Options SAVE_SIZE_IN_EMPTY_ORD_NUMBER is not working with Option RECALC_SIZE_WHEN_OPEN_BOM activated. [RM-6946]
• Issue fixed: PITCH and THREADS_PER_INCH values are set to default values. COOL_PITCH from cooling_bore entries is ignored. [RM-6820]
• Issue fixed: Freeze Position IDs does not work correctly with position parameter written to part. [RM-6806]
• Issue fixed: Counterbores of Meusburger E1367 locating ring is not regenerating for some instances. [RM-6804]
• Issue fixed : When define Sprue Bushing, if the Offset value is a negative number and its absolute value is equal to (or bigger than) K-value, then there is not cut created in the plate. [RM-6709] [SPR-7587367]
• Issue fixed: In case points of ejector pins are below trim surface it is not possible to select a valid ejector length. [RM-6696]
• Issue fixed: In case user clears Project Prefix or Project Name in Project Dialog input panel, names are always reset. [RM-6704]
• Issue fixed: Confusing behavior when changeing screw types [RM-6536]
• Issue fixed: Relations in guide component template guide_e1110.prt are incorrect [RM-6301]
• Issue fixed: With new localized EMX Options, some text descriptions are incorect. [RM-6401]
• Issue Fixed: Sorting BOM by Parameter values from column header does not work as expected. [RM-6292]
• Issue fixed: Incorrect groove diameter for PARKER nitrile o-ring. [RM-6286]
• Issue fixed: Arrows (flow in and flow out) from cooling components without counterbore are incorrectly positioned [RM-6175]
• Issue fixed: Cool Plug UDF in Hasco Z942 is duplicated when modifying component position. [RM-6719]
• Issue fixed: Ball plug offset Meusburger E2071 is not set up correctly in case udf dimension value is modified. [Bug #6707]
• Issue fixed: While Modifing Components from Moldbase Definition, types are not updated correctly in any case. [RM-6706]
• Issue fixed: In EMX Options Dialog validate cell content, avoid, spaces, invalid characters. [RM-6657]

10.0 M020 2018-09-07-01

Bugfixes

• Drawing Areas of Moldbase Definition Dialog not visible in Creo 5.0.2.0 [RM-6937]

10.0 M014 2018-06-28-01

Enhancements

• In Plate Dialog a third visibility option "visible locked" is now available, which allows user to lock a resumed feature within the plate. It will no be suppressed during size change of the plate. [RM-6611]
• Clamping slots are now available for LKM side gate moldbases. [RM-6476] [SPR-7559604]
• Introduce new validated cut out udfs for ejector pins. Rework variable option behavior. [RM-6569]
• Update MEUSBURGER plate catalog to latest state of March 27th 2018. [RM-6230]
• Update KNARR ejector, guides, component data to the latest state June 14th 2018. [RM-5933]
• New udf cut out images for Cooling, Guides, Dowel Pins and Ejectors. [RM-6227]
• Add new EBERHARD ejectors 6116, 6118, 612R, 6143, 6178, 6261, 6271, 6281, 6331, 6335, 6341, 6351, 6361, 6371, 6381, 6441 and 6622. [RM-5843]
• Add new STRACK side interlocks W44, Z38 and Z46. [RM-5467]
• Add EMX Functions to Creo 4 Quick Access Toolbar. [RM-6152]
• Keep selection of selected datums when defining a new component. [RM-5291]
• Add new STRACK spring components SN2520, SN2540, SN2560, SN2580 and SN2590. [RM-5465]
• Add new STRACK urathane springs SN2600 and SN2625 [RM-5465]
• Cutout data for Progressive ESTW-ejector sleeves is incorrect [RM-6294]

Improvements

• Make sure Ejector Pin Option TRIM and AUTO_LENGTH are not used at the same time. [RM-6590]
• In Ejector Pin dialog add icons to rotation fixture option menu. [RM-6507]
• Allow PLATE_THICKNESS as keyword in rules of feature_data.txt. [RM-6428]
• Add GROOVE feature to plate_5_es template. [RM-6429]
• Updated STRACKk ejector component data. [RM-5457]
• Nominal values for DME stop disc SB are not correct Bug [RM-6274]
• Increment name from ejector pins are not correct when placed in subassemblies. [RM-6189]
• Some improvments in Component Editor GUI.

Bugfixes

• Issue fixed: Ejector pin preview sketch udfs does not support rotfix angle. [RM-6626]
• Issue fixed: On trimmed ejectors, in case distance from head surface to trim surface exceeds nominal ejector length, ejector is incorrectly extended to invalid length, which does not fit order number. [RM-6340]
• Issue fixed: While trimming ejector pins, trim quilt surface is not found correctly in case of edge cases. [RM-6275]
• Issue fixed: BUW_BOM_MANUAL Parameter is overwritting existing EXCEL_IGONRE and BUW_INCLUDE_IN_BOM setting. [RM-6373]
• Issue fixed: Japanese Project Name display garbled characters in model tree. [RM-6372] [SPR-7397766]
• Issue fixed: Relation in screw_7-templates are wrong [RM-6316]
• Issue fixed: Cutout data for Progressive ESTW-ejector sleeves is incorrect. [RM-6294]
• Issue fixed: Ejector pin instance is not found with COLOR added to nonimal values. [RM-6240]
• Issue fixed: Colors of surfaces are not applied on both surface sides [RM-6287]
• Issue fixed: Values of the guide counterbore cut outs are wrong for dme-moldbases larger 396x396. [RM-6277]
• Issue fixed: Problems while assembling Auto screws on misumi locating rings. [RM-6229] [SPR-7533175]
• Issue fixed: For Eberhard blade ejectors the A and B values of the squared tip need to be flipped. [RM-6209]
• Issue fixed: Dowel pin cut out images are not correct for CounterboreTop-BlindholeBottom and CounterboreBottom-BlindholeTop. [RM-6205]
• Issue fixed: Option SAVE_SIZE_OF_PART_IN_EMPTY_ORDNUMBER is not working correctly. [RM-6190]
• Issue fixed: Pos id in PART_RENAME_FORMAT is not replaced correctly. [RM-6191]
• Issue fixed: Strack cooling extension Z7714 has incorrect cut out definitions. [RM-6178]
• Issue fixed: Cooling component Meusburger E2300 has incorrect orientation plane defined. [RM-6171]
• Issue fixed: Cooling component Meusburger E2318 has incorrect cut out. [RM-6169]
• Issue fixed: Components assembled on inverted surfaces in case placement surface is created by published geometry. [RM-6137]
• Issue fixed: With PRO_LANG set to "Chinese_Taiwan.950" emx uses incorrect encoding. [RM-5325] [SPR-6248970]
• Issue fixed: Japanese Project Name display garbled characters in model tree [RM-6372] [SPR-7397766]
• Issue fixed: Ejector pin instance is not found with COLOR added to nonimal values [RM-6240]
• Issue fixed: Components assembled on inverted surfaces (e.g. created by published geometry) are assembled in opposite direction [RM-6137]
• Issue Fixed: No default partname entries for cooling meusbruger E2081, E2082 and E2088. [RM-6165]
• Issue Fixed: When Modifying screws the thread depth information is not initially painted.[RM-6309]

10.0 M013 2018-03-14-01

Enhancements

• Implement STRACK side interlocks Z38, Z46 and W44 [RM-5467]
• Add Add Agathon top interlocks 7992 and 7993 [RM-5943]
• Add Meusburger component top lock E1311 [RM-5523]
• Add component HASCO circlip Z67 [RM-4975]
• New HASCO hoistring Z715 and Z725 added. [RM-6003]
• New HASCO guide components Z016 and Z025 added. [RM-6003]
• New HASCO ejector pins Z400, Z410, Z492, Z4655 and Z4656 added. [RM-6003]
• Update instances of HASCO guide components Z011, Z012, Z013 and Z022. [RM-6003]
• Update instances of HASCO screw Z31 and Z32. [RM-6003]
• Update instances of HASCO ejectors Z40, Z41 and Z42. [RM-6003]

Improvements

• Enable options CREATE_LAYERS_PER_PART and CREATE_GROUP_LAYER again [RM-4217]
• Avoid Size-Change-Warning message if no components exist when modifying size in Moldbase Definition [RM-6043]
• Make sure toplocks are displayed properly even if depth values are not defined in dat-file [RM-6042]
• The color props Intensity and Ambient should be set to 100 when setting technology colors [RM-6102] [C-14031621]
• The value for CUT_CB_DIA of Hasco Z1000 bush should be shoulder-diameter+1mm [RM-6080]
• With AUTO_SAVE_LAST_COMPONENT for cooling components the bore depth value is possibly incorrect [RM-6004]
• When manually modifing Plate thickness to non standard value. in 3+1 Pattern 4
• Reduce row default row height in cut out table of component dialog. [RM-5936] equal guide components are assembled during update of dependent components [RM-5977]

Bugfixes

• When adding new plate between two existing plates guide components are temporary painted in wrong position [RM-6034]
• When assembly library assemblies freely, without assembly reference, subcomponents, subcomponents are not renamed correctly [RM-6006]
• The ejector plate dimensions in some bigger Meusburger-sizefiles are wrong [RM-6078]
• Make sure to set correct BUW_ORD_NAME component parameter in second rail [RM-5666]
• When calculating cooling bore overlap value ... nominal values such as R1/8 etc. are not considered properly [RM-6048]
• Creo Parametric 3.0 exits prematurely when selecting Assembly Definition in specific assembly in EMX 9.0 [RM-5500] [SPR-5258833]

10.0 M012 2018-02-05-01

Enhancements

• Allow export of waterlines with centerlines for MOLDFLOW analysis. [RM-5901]
• Add Option to tag ejector bores with parameter BELONGS_TO_WATELRINE to make it visible vor mold design wall thickness check. [RM-5810]
• Provide a pulldownlist in the Component Editor to define CUTQUILT-specific parameters. [RM-5765]
• Allow usage of Creo-Component Interface in EMX library components. [RM-2809]
• Improve handling of Standardparts when working with Windchill. [RM-5793]
• STRACK plate catalog updated. [RM-5464]
• New Button in Ejector Pin Designer: Placement of ejector pins on existing points implemented [RM-5024]
• New AGATHON top interlock 7990 added. [RM-5482]
• Allow predefined dowel pin offset in component dat files. [RM-5572]

Improvements

• In the udf cut out table for cooling components important D5 and T5 value should always be first in list. [RM-5849]
• Speed up assembly time for ejector pins if they are defined on multi points features with multiple/patterned reference models. [RM5751]
• Add and verify OMNI sliders. [RM-4801]
• Add and verify D-M-E inch components, baffles and jiffy locks. [RM-5011]
• Improve DMS insulation plates and locating rings. [RM-5579]
• Meusburger cooling extension E2018 needs to be assembled and cutted like Hasco Z90. [RM-5924]
• Meusburger screw E1220 does not have an default offset value. [RM-5922]

Bugfixes

• Issue fixed: KNARR flat ejectors have flipped A and B values. [RM-5916]
• Issue fixed: KNARR ejector 33111 has incorrect head value. [RM-5921]
• Issue fixed: Setting bore colors does not work properly if arrows are included in Waterline Designer. [RM-5637]
• Issue fixed: When modifying a library component assembled in a subassembly, the incorrect assembly is displayed in the dialog box. [RM-5891]
• Issue fixed: Meusburer Screw E1240 has incorrect cutout values. [RM-5939]
• Issue fixed: Meusburger E1510 support pillar has deprecated PRE cutout bore. [RM-5938]
• Issue fixed: Meusburger stop pin E5105 has incorrect cut out bore diameter. [RM-5937]
• Issue fixed: In Library parts even ich material in dat file is set to "?" EMX tries to define a material. [RM-5932]
• Issue fixed: Knarr ejector 37111 with options core pin and rotfix enabled has an invalid angle. [RM-5919]
• Issue fixed: Knarr ejector 37999: Options Corepin and Autolength are missing. [RM-5918]
• Issue fixed: When modifying a component by selecting its refgroup, references get lost. [RM-5672]
• Issue fixed: UDF cool_thread_single has wrong geometry if point is not on surface. [RM-5673]
• Issue fixed: Ejector naming is incorrect when modify trimmed ejectors on multi point feature. [RM-5733]
• Issue fixed: Crash while modifing a component and no reference group exists. [RM-5770]
• Issue fixed: Wrong BOM_NAME after modifictaion of rails. [RM-5666]
• Issue fixed: Wrong position of datum plane wiht stripper plane. [RM-5719]
• Issue fixed: Delete all cooling function deletes all models if no cooling component is defined. [RM-5722]
• Issue fixed: Split comp_data.txt files is not working if it is not in EMX installation. [RM-5623]
• Issue fixed: IGES export for assemblies is incorrect. [RM-5611]
• Issue fixed: Missing buttons "Copy drawing" and "Drawing pulldown" in library dialog box. [RM-5594]
• Issue fixed: Inactive plate_material.txt file in plate dialog. [RM-5573]

10.0 M011 2017-10-25-01

Enhancements

• MEUSBURGER dat files updated to latest state of product data (15 October 2017).
• New MEUSBURGER compact slider sets E3080 with E3082/E3084 added. [RM-5032]
• New MEUSBURGER compact slider sets E3072 with E3074/E3076/E3078 added. [RM-5032]
• New MEUSBURGER compact slider sets E3070 with E3074/E3076/E3078 added. [RM-5032]
• New MEUSBURGER compact slider sets E3360 added. [RM-5032]
• New MEUSBURGER compact slider sets E3330 added. [RM-5032]
• New MEUSBURGER compact slider sets E3300 added. [RM-5032]
• New MEUSBURGER library component E2730 [RM-3634] added.
• New MEUSBURGER knockouts E1516 and E1517 for FW moldbases added. [RM-5471]
• New MEUSBURGER component E1064 for FW moldbases added. [RM-5452]
• New MEUSBURGER FW and FB-moldbases with plate features added. [RM-5391]
• New MEUSBURGER library component E2682 added [RM-5447]
• New MEUSBURGER library component E2680 to library components added. [RM-5447]
• New MEUSBURGER library component E3049 to library components added. [RM-5447]
• New MEUSBURGER screw E1226 added.
• New MEUSBURGER slider component E3048 added. [RM-5447]
• New MEUSBURGER slider component E3047 added. [RM-5447]
• New MEUSBURGER slider component E3045 added. [RM-5447]
• New MEUSBURGER support pillar E1512 and E1513 added. [RM-5447]
• New MEUSBURGER slider set E30110 added. [RM-3635]
• New MEUSBURGER guides E1115, E11202, E11206 and E1170 added. [RM-5381]
• New MEUSBURGER screws E1225, E1251, E1252, E1274 and E1275 added. [RM-5381]
• New MEUSBURGER ejectors E1700DLC, E17103, E1710DLC, E17262, E17262DLC, E17264, E1727DLC, E1728DLC and E1742 added. [RM-5381]
• New MEUSBURGER dowel pin E1301 added. [RM-5381]
• New MEUSBURGER top interlock E1306 added. [RM-5381]
• New MEUSBURGER side interlock E1308, E1315 and E1320 added. [RM-5381]
• New MEUSBURGER locating rings E1367, E1372, E1377 and E1382 added.[RM-5381]
• New MEUSBURGER springs E1536, E15365, E1537, E15375, E1358, E15385 and E1539 added. [RM-5381]
• New MEUSBURGER guide E1115 added. [RM-5380]
• New MEUSBURGER guide for knockouts E1150 with predefined screws added [RM-4977]
• New MEUSBURGER support bushing MEUSBURGER E1662, E1663 and E1664 added [RM-4976]
• New MEUSBURGER cooling components USA-type E23xx added. [RM-4856]
• New STRACK ejectors R1628, R1634, Z6015 and Z6017 added. [RM-5457]
• STRACK cooling component files Z7713, Z7730, Z7744, Z7746, Z7750 updated. [RM-5455]
• New STRACK cooling components Z7714, Z7720, Z7725, Z7748, Z7771 added. [RM-5455]
• New STRACK guides Z69, Z68, Z4315, Z4085, Z4078-R, Z4078, Z4077-R, W35, W35-R, W33, W33-R, W32, W31, W30, W25, W24, W23, W21, W20 added. [RM-5433]
• New STRACK dowel pin R523 added. [RM-5456]
• New STRACK locating rings Z10, Z11, Z16 added. [RM-5459]
• New STRACK support pillars Z19 added. [RM-5460]
• New OPTIZ library components date stamps DATI1000, DATI200, DATI2900 and DATI3000 added. [RM-5447]
• KNARR dat files updated to latest state of product data.
• New KNARR guides 264180, 51001, 51003, 51011, 510110W, 51100, 51110, 511100W, 51112, 51113W, 51114, 51210, 51211, 51702, 51711, 51712, 51713, 51722, 51911, 51912, 51932, 51934 and 551110 added.
• New KNARR ejectors, loacting rings and screws added.

Improvements

• "MAIN_CUT" feature can be edited in MEUSBURGER P-Rails. [RM-5446]
• Add Arrows for waterline flow in UDFs instead of components. [RM-2332]
• Improve evaluation of cylindrical parts in outline calculation. [RM-5257]
• Cleanup Arburg machine data.
• Consider Parameters driven by relation in BOM dialog box. [RM-5511]
• Consider new HASCO locating ring names and add missing description in comp_data-files. [RM-5495]
• Provide new LG-calculation rule in datfiles as comment. [RM-5360]
• When opening EMX Options complement current partnames.cfg with missing entries from template partnames file. [RM-5389]
• Add chamfers to baffle cutouts and calculate component length by bore-depth. [RM-5360]
• Add leaderpin-cb in plate_1_es template for PEDROTTI g-types. [RM-5421]
• Add GROOVE feature in stripper plate IS for PEDROTTI catalog. [RM-5396]
• Add SMALL-RAIL cut for D-type rails of PEDROTTI. [RM-5420]
• Enable Features driven by options also for Library Components. [RM-5358]
• New icons in Project Dialog added.
• Allow locally stored references for components in subassemblies. [RM-5368]
• Add missing cooling bores values in configuration/bore_technology. [RM-2332]
• Enable ROTFIX_ANGLE for EP_FIXTURE_CUT in all metric ejector templates. [RM-5321]
• Add relation for sketch in EJP-UDF to display parameter NUM. [RM-5261]
• Remove HASCO Round moldbases and components. [RM-5341]
• Replace option ADD_CUT_IN_FACE_OWNER with a checkbutton in component dialog box. [RM-4875]
• Remove Option "Check Interference" from component dialog box. [RM-5234]
• Improve dialog opening time of BOM Dialog with large assemblies and EMX 10 with Creo 4. [RM-5348]
• Equipment buttons (Thermal Insulation, Knockout, Side Interlock etc.) moved to Component Overflow.

Bugfixes

• Fix connection issue with license server flexlm 11.10
• In EMX 10.0 M010, unable to create the screw with "Predefine Component" option. But EMX 10.0 F000 worked.[RM-5497][SPR-7014037]
• ANSI standard screws inserted in Expert Moldbase assembly displays dimensions in ISO standards [RM-5498] [SPR-5191259]
• Add missing Meusburger plate pictures. [RM-5352]
• Add missing cuts for shoulder screws in intermediate plates. [RM-5539] [SPR-7033948]
• Update local parameters before defining a new component or enter moldbase definition. [RM-5502][SPR-7012301]
• Unable to set another guide component from mold base definition dialog box in EMX 10.0 M010. [RM-5499] [SPR-7012124]
• Meusburger screw with spring washer dat file has incorrect E1585 instances.
• Subcomponents and subassemblies are not exchanged recursively. Introduce function to exchange models in case of subassemblies in EMX assemblies. [RM-5532]
• Crash if folder names in subdirectories library path are identical. [RM-5526]
• Crash if no instances are defined for a library component. [RM-5519]
• Dat file of subcomponent in library asssembly MEUSBURGER e1930 is not defined.
• Autoscrews on Spruebush are not updated when offset is modified. [RM-5504]
• Trimmed ejector pins disappears, if modified. [RM-5503]
• HASCO Z11 guide bush data and cutout is incorrect.[RM-5494]
• When working in different assembly levels, the stored placement references cannot be rebuild in Modify-mode [RM-5486]
• Ordering numbers of return pins and support pillars are not updated when changing mold base size from moldbase definition dialog box. [RM-5367]
• It's not possible to add balloon-notes in drawings [RM-5484]
• M8x0.75 Core bore diameter needs to be 7.2 with ISO standards.
• "&drw_page" parameter is always initialized with page 1 even if solid is not displayed on drawing [RM-5444]
• Show Waterline feature does not include Reference Model. [RM-5248]
• The orient plane reference is not rebuild properly when modify a baffle component [RM-5424]
• Correct core depth for stop disc bores in PEDROTTI ejector base plate [RM-5373]
• PEDROTTI mold bases use stop discs instead of stop pins. [RM-5373] [SPR-6981055]
• Ordering numbers of guide components are incorrect after changing mold base size. [RM-5367]
• Ordering numbers of support, ejector pins, screws and guides are incorrect after changing mold base size.[RM-5367]
• Parameter value alue is set back after editing with "Edit BOM Parameter"-dialog. [RM-5374]
• Flip of orientation in library dialog. Difference between preview and final assemble of component. [RM-5371]
• Incorrect cut outs in FH cavity part when a lifter is placed. Only the MH should be cutted [RM-3006]
• Consider negative regenerated dims when reading Dimensions from library components [RM-5359]
• Not all possible *.rel-files are evaluated [RM-5357]
• HASCO Z13 data is incorrect. [RM-5355]
• Tolerance with initial "+" befor the number is not considered correctly.
• Avoid double cooling bores with option ADD_CUT_IN_FACE_OWNER enanbled. [RM-4875]
• Use invers values for THREADS_PER_INCH and PITCH in cosmetic threads [RM-5350]

10.0 M010 2017-09-08-01

Improvements

• Improvement of BOM export to EXCEL

Bugfixes

• For Library Components with subcomponents instances are not read correctly from dat file [RM-5481]
• Cut outs are not created in case ray trace function intersects with edge [RM-5378]
• Fix in Assemble predefined screws: Line was removed during manufacturing.

10.0 F001 2017-09-13-01

Enhancements

• When working with ADD_COOLING_REF_IN_PART, make sure Parameter BUW_PROJECT_SHORT is in all plates [RM-5204]
• Allow usage of two additional measurement planes as placement constraints [RM-5129]
• Allow UDF's in components with parameter BUW_GUIDE [RM-5126]
• Save thread depth and bore depth for predefined screws [RM-5125]
• Enable usage of partname-wildcards <partid_refx> also for predefined components [RM-5108]
• Increase number of allowed characters in EMX Options>Part Names>Partname-Column from 32 to 50 characters [RM-5107]
• BOM: Show how many objects were found with search panel [RM-5052]
• Add new Hasco side interlock Z09 [RM-4973]
• Add component HASCO guide bush Z14W [RM-4861]
• Implement new Rabourdin guide components 1071, 1005, 1061, 651, 671 and 601 [RM-4813]
• Update screw length when changing plate thickness [RM-4718]
• Knarr Ejector Pins: Add Round Types 37711, 33111 [RM-4610]
• Add components KNARR ejector sleeves 38488, 38781, 38882 [RM-4581]
• Add components KNARR core pins 37121, 37411, 37666, 37418 [RM-4580]
• Enable custom parameter Values in EMX BOM Balloons [RM-4399]
• Rework layer concept in EMX: Rule-driven layers etc. [RM-4217]
• Add Progressive x-style side locks SLX [RM-3649]
• Add new Stäubli cooling components (E28xx) [RM-3066]
• Enable moving of Inserts to the insert-subassemblies in Cavity Layout [RM-3036]
• NR_DIGITS_BOM is not considered in plate ordering numbers [RM-5250]
• When Modifying Assembly with auto lib threads, delete and recreate the auto lib threads [RM-5168]
• Show new columns for color transparency in Option/technology-dialog box [RM-4982]
• Allow usage of EMX10 dat-files combined with EMX9 udf_data-file [RM-5259]
• Add Latchlock MEUSBURGER E1840 (Round) [RM-5029]
• Add new STRACK compact slider sets: Z4290 [RM-5033]

Bugfixes

• When Modifying component and supplier is changed, name is not updated. [RM-5275]
• Inherited colors of cut-quilts are not applied to ref-patterned cutouts [RM-5269]
• C13777197: Machine Bar Pattern in Machine dialog box cannot be driven like other patterns [RM-5263]
• Enable VarParameters for UDF's to display the Ejector Pin Parameter PARTID in the plate that has the ejector head cut [RM-5261]
• OFFSET for ejector rotfix1 is wrong so chamfer fails [RM-5251]
• When open BOM dialog box, visible components are listed in the hidden block [RM-5249]
• Geometry of Ejector pin E1712 and its head-cutout is wrong [RM-5247]
• Duplicate message GUI emx_tip_preview_ce in emx_gui_messages.txt [RM-5246]
• Hasco Z10 guide bush toggle orientation when changing moldbase size [RM-5221]
• External Data of Smart Holechart gets lost when renaming parts [RM-5206]
• When modifying parts with RMB in old 4.1 moldbase-assemblies, EMX crashes [RM-5203]
• Multiple usage of preview button does not reset the display style [RM-5191]
• The template file "rule_layers.prt" is saved several times in configuration/templates [RM-5172]
• Allow coloring of the UDF auto_libthread [RM-5140]
• Simulation object roles, delay and stroke values of latchlocks are not update while modifing components [RM-5138]
• Correct setting of LATCH_DELAY and LATCH_STROKE-Parameters for Simulation [RM-5132]
• The model list of Mold Base Opening Simulation dialog box is not emptied when closing the dialog [RM-5130]
• The sketch cool_plug_symbol is not added to plates when defining a pipe-plug component [RM-5106]
• Shoulder values LG2 for EHS-ejector pins are wrong [RM-5105]
• When defining cooling comps in partmode, cooling comps are assembled multiple times [RM-5081]
• Finish incomplete data for Knarr ejector pin 37414 [RM-5073]
• Avoid crash when draw incomplete csys-patterns in Moldbase Definition [RM-5071]
• Cavity Layout Dialog: Cannot selection placement coordinate system of second, third cavity assembly [RM-5053]
• Copy/Paste in BOM does not work robust in drawing mode [RM-5039]
• Wrong usage of the term "Stücklistennummer/BOM Number" for Balloons [RM-5038]
• Check model quality and order numbers of HASCO slidersets [RM-5031]
• Latchlock HASCO Z170 (simple), Z173 (round), Z174 (flat): Models are inapporiate and need to be remodeled, Check References and Nominal Dimenesions [RM-5030]
• Latchlock MEUSBURGER E1820 (flat) Models are inapporiate and need to be remodeled, Check References and Nominal Dimensions [RM-5028]
• Latchlock Strack Z3 (round) and Z4 (flat): Models are inapporiate and need to be remodeled, Check References and Nominal Dimensions [RM-5027]
• Modify of predefine AUTO_SCREWS and AUTO_PINS in EMX10 cause crash [RM-4955]
• Opening Simulation does not work in Creo 4 and EMX 10 [RM-4497]

10.0 F000 2017-27-02-01