Changelog

12.0.2.10

Bugfixes

• Issue fixed: Highlighting of components in drawing only works for first sheet. [RM-11645]

12.0.2.9

Improvements

• Improve algorithm when transfering surface parameters from reference part to extract parts. [RM-11256]
• Improve set position behavior when reopening dialogs on multiple monitors. [RM-11252]

Bugfixes

• Issue fixed: Highlighting of components does not work anymore in drawing. [RM-11185]
• Issue fixed: Some menus in Simplified Chinese version EMX 13.0.2.0 are not translated by yet, for example, "Hydraulic Component", "Pneumatic Component", "Fluid Components" and "Remove all Components by Type" under EMX 元件 tab [RM-11297] [SPR-12581939]
• Issue fixed: Udf name is not taken into account in chamfer size rules. [RM-11329]
• Issue fixed: Parameter Designation status is not removed in case definition was changes from YES to NO. [RM-11377]
• Issue fixed in DIN580 screw [RM-11521]
• Issue fixed: Problem with line Up and down pushbutton in case of empty cell values. [RM-11541]
• Issue fixed: Renaming problem in Library assemblies where subcomponents are assembled multiple times. [RM-11553]
• Additional fix for: HASCO core retainer plates can not be selected. [RM-10792]

12.0.2.8

Enhancements

• Add new and update existing D-M-E Europe locating rings: F1360, F1367, RB, DHR21, R19, R20, R22, R23, R40, R60, R60L, RB60 and RB90
• Add new and update exisitng D-M-E Europe guide components: R01, R02, R03, R03W, R04, R04W, R05, R08, R09, APD, IPWC, IPNH, FBC, FBN, FSC, FSN, FB120, FB140, FW14, GB112, GB113, GB114, GEB, TD, ZH, F1000, F1010, F1020, F1030, F1040, F1100, F1110, F1120, F1121, F1125 F1126, F1127, F1140, F1144, F1145, 1150, F1332, FW1213. [RM-9347] [RM-9346]
• Add new and update existing D-M-E Europe support Pillars: SP, FW28, FW29.
• Add new and update existing D-M-E Europe ejector pins: CHE28, EAH28, ENA05, ENC05, EOA05, EPA05, EPC05, EPD28, ERA05, ERFAQ, EDC, EDH, PCM, FW, FK, S, KS, EAV, F2R and F4R. [RM-10587]
• Add D-M-E Europe knockout components: F1050 and 1515.
• Add MEUSBURGER knockout component: E1515.

Improvements

• Move MEUSBURGER knockout E1514 from screw to knockout category.
• Improve MEUSBURGER ejector package guiding unit with collar E1325
• Improve MEUSBURGER ejector package guiding unit E1330

Bugfixes

• Issued fixed: ssue in Meusburger component E3143_ and E3141_. [RM-10311]
• Issued fixed: Creo Parametric configured with EMX exits prematurely when modifying surface in mold assembly. [RM-10395] [SPR-10621485]
• Issued fixed: Ordernumber of Meusburger F53 plates is not correct. [RM-10541]
• Issued fixed: Dimension error in MEUSBURGER E3119 silder component. [RM-10544]
• Issued fixed: IdentifyTrimSurfaces functionality is not available anymore in Part and Assembly Mode [RM-10579]
• Issued fixed: Invalid Dimension in Meusburger FM90 babyplast guide package. [RM-10602]
• Issued fixed: Do not allow to define a new ejector with existing modelname. [RM-10718]
• Issued fixed: In case different ejector typ is selected and nominal values are not selected the ordernumber is incorrect. [RM-10719]
• Issued fixed: Automatic chamfer creation does not work for patterned components. [RM-10736]
• Issued fixed: Wrong BORE_REF_DIA values in HASCO cooling component Z98. [RM-10789]
• Issued fixed: HASCO core retainer plates can not be selected. [RM-10792]
• Issued fixed: Crash in case floating licenese is released and flexlm version is 11.12 and older. [RM-10848]

12.0.2.7

Bugfixes

• Issue fixed: Colors are not applied in Show Waterline

12.0.2.6

Enhancements

• Implement command to calculate outline for all models in assembly and update &size parameter [RM-10255]
• Highlight all changed size values in BOM in case all models size are recalculated. [RM-10291]
• Introduce Button in BOM to calculate size for selected models on right mouse button. [RM-10292]
• Add default parameter value &drw_exists to write drawing existing status to models. [RM-10296]
• Implement button on right BOM mouse menu to reset changed size to current parameter value. [RM-10301]

Bugfixes

• Issue fixed: Crash when updating patterns in mold bases with assembly cuts. [RM-10275]
• Issue fixed: When modifying library assemblies which are created by component editor part names rules of sub components are incorrect. [RM-10276]
• Issue fixed: Regression in BOM_BALLOON_CUSTOM_PARAM. Part parameter of type string can not be written. [RM-10287]

12.0.2.5

Bugfixes

• Issue fixed: EMX Command Pneumatic components not avavilable in ribbon.

12.0.2.4

Enhancements

• New EMX Commands for Hydraulic and Pneumatic components. [RM-5448]
• New dialog to delete all components of selected type. [RM-6079]
• IGES, STEP, DXF export in BOM Dialog works with Windchill and active workspace. [RM-7497]
• Introduce new Option SOLID_TOLERANCE_STANDARD to allow user to specify the solid tolerance mode. [RM-7901]
• Add Options to automatically created chamfers in UDFs for all kinds of components. [RM-8991]
• Implement command to transfer surface parameter from reference parts to mold volume extracts. [RM-9894]
• Add MEUSBRUGER guides E5140, E5152 and E5202. [RM-9900]
• Update MEUSBURGER components to latest state: 2nd quarter 2020. [RM-10028]

Improvements

• Improve cutout creation in case cooling components are placed on flat reference surface, but ray hits angular surface. [RM-9736]
• Implement way to check for multiple types of licenses (Advanced and Standard) in license.ini.[RM-10026]
• BOM_BALLOON_CUSTOM_PARAM works with component parameters as well [RM-10081]

Bugfixes

• Issue fixed: Missing entries in bore_screw.cfg for 1.4 and 1.6 mm bores. [RM-9633]
• Issue fixed: Problem in Knarr insulation plate 77336. [RM-9668]
• Issue fixed: "G" Character is missing in for non-ISO mm threads, instead "M" is displayed. [RM-9716]
• Issue fixed: In case insert mode is activated and insert position is below or inside of a group, the new reference and cutout UDFs will be assembled inside of UDF. [RM-9734]
• Issue fixed: Eyebolts two features in cavity plates are not centered. [RM-9760]
• Issue fixed: Missing Transparency in color of EMX plates. [RM-9792]
• Issue fixed: Issue with counter bore depth value in flat head auto screws. [RM-9821]
• Issue fixed: Invalid relation in template file of guide_e1144. [RM-9833]
• Issue fixed: Unable to change thickness of Meusburger Side Interlock. [RM-9883]
• Issue fixed: Length and Width values of standard plates can be change when Special shape is set. This can lead to incorrect order numbers. [RM-9985]
• Issue fixed: Ejector pin Symbols are only created on one cavity insert. [RM-9987]
• Issue fixed: In case mold base size changes and option keep plate thickness is set, in case no valid instance was found order number changes to P plate. [RM-9994]
• Issue fixed: In case model is tagged as purchased part in BOM, sub comps are still listed in Repeast region on drawing. [RM-10007]
• Issue fixed: In case of option pattern on all models and models are assembled on symmetric angles analysis feature in refgroup fails. [RM-10012]
• Issue fixed: Problem with EJP_ORIGIN_MOLDBASE coordinate system in assembly when placeing ejector pins. [RM-10027]
• Issue fixed: Add missing counterbore in meusburger guide components E1100 and E1105. [RM-10034]
• Issue fixed: Wrong GUIDE_BORE_LEADERPIN_SPECIAL diameter in plates meusburger F55. [RM-10109]
• Issue fixed: In case ejector pin is defined on multi point feature and partname is e.g. 29 chars it can occur that individual partnames can not be created. [RM-10143]
• Issue fixed: Regression: Option USE_SHORT_NAME_TRIM_EJP does not work correctly. [RM-10144]
• Issue fixed: References in Rotfix features of ejetor pins need to be verified to avoid failing of feautres when rotfix rotation value is edited. [RM-10145]
• Issue fixed: In case option EXCL_SIZE_CALC_PARAM is used, the size format includes an additional "=". [RM-10165]
• Issue fixed: Dimensions of sub components are not set correctly when archiving instances of assemblies in Component Editor. [RM-10169]
• Issue fixed: In case Modfiy Project is run on an active Workspace, the drawings are not correctly renamed. [RM-10170]
• Issue fixed: In case drawings is created during project modification with active Windchill, there are still ghost objects of skeleton and machine in workspace. [RM-10173]

12.0.2.3

Enhancements

• Ejectors: Add note "trimmed" or "auto_length" to NOTE Parameter for ejector pins. [RM-6403]
• Enable multi-page export of DFX-files in BOM. [RM-7499]
• New STRACK guides implemented [RM-7541]
• Parameters of the mold models are copied to duplicated cavity assemblies when using Duplicate Cavity under EMX Manufacturing Mode [RM-8898]
• New inch DME Ejector Pins implemented [RM-8918]
• Add functionality to use EMX Parameters in PART_RENAME_FORMAT configuration option [RM-8919]
• Implement general solution to add numbers into USER_NUMBER with changing the dat files by usuing the config file cusomer_numbers.cfg [RM-8990]
• Change the Ejector UDF´s from counterbore depth to real guide length. [RM-9289]
• New DME side interlock BGS. [RM-9442]

Improvements

• Use COOL_HALF_ANGLE in cooling cutout values instead of fix value. [RM-6386]
• Improve "sel_list.txt" behavior in combination with "supplier.cfg". [RM-6394]
• Shortened baffle length is only writtten to NOTE Parameter for Meusburger E2100. Do it for all baffle components [RM-6427]
• Improve beahvior: In some parts it can occur, that the screw option THRU_ALL is cutting not to the next surface, but throught the whole model. [RM-7616]
• Plate feature dimensions can now be locked and are not set back in case of size change. [RM-7994]
• Apply SMARTColor udfs from mm to inch, Add EMX_SURFACE_FUNCTION parameter to inch plate templates. [RM-8692]
• In case clamping plate changes from F10 to F20 the insulation plate is not automatically updated. [RM-8895]
• Also Update all cutout UDFs in Update Ejector Pin Dialog. [RM-9305]
• Update existing MEUSBURGER E-components to latest state: 1st quarter 2020.
• Update existing MEUSBURGER P and F plates to latest state: 1st quarter 2020.

Bugfixes

• Issue fixed: Component Editor - Cut quilt surfaces in subcomponents are not listed in table (e.g. Slider). [RM-6387]
• Issue fixed in Meusburger Babyplast. [RM-6655]
• Issue fixed: Negative plate clearance value should not be allowed, stock allowance is displayed invalid while modifying a plate [RM-8115]
• Issue fixed: In case Layers are create per PART and component is patterned, only the pattern header is added to the layer.[RM-8373]
• Issue fixed: Material to part is not set if the material parameter is processed in BOM. [RM-8772]
• Issue fixed in Update Ejector Pins Dialog. [RM-8886]
• Issue fixed: Crash in case no PTC Tool Design Option license is availabe and ejector pin should be trimmed with Trim feature. [RM-8887]
• Issue fixed: For moldbase Mesburger/Type3, if choose P plate to replace default one, some holes are also displayed. [RM-8892] [SPR-9510062]
• Issue fixed: EMX Warning about "Cannot find a matching instance as a replacement for the guide component." will prompt when trying to load futaba moldbase. [RM-8896] [SPR-9431001]
• Issue fixed: In case BOM position ids are frozen and a plate is modified in assembly defintion the position id is manipulated [RM-9138]
• Issue fixed: Assemble again with the option NAME_SUBASM_COMP default references are not set [RM-9145]
• Issue fixed: PRYSLOT features for Meusburger plates can sometimes not be regenerated in case the plate thickness is modified. [RM-9147]
• Issue fixed: Load moldbase "futaba_h/HA-type", the cutout of the 3rd guide isn't created. [RM-9255] [SPR-9632843]
• Issue fixed: Unable to create vertical waterline in Waterline Designer with error "Failure Diagnostics" [RM-9256] [SPR-9635168]
• Issue fixed: Problems with Meusburger Stop Disc E1500 screws. [RM-9265]
• Issue fixed: It is not mossible to jump bewteen the the selected lines in the BOM using the arrow keys. [RM-9351]
• Issue fixed: Crash in case skeleton model is manually deleted by user and Moldbase Definition Dialog ist opened [RM-9368]
• Issue fixed: In case individual dat files are placed in EMX_USER_CONFIG_PATH folder and _types.txt file is active, all other dat files from default installation are ignored .[RM-9467]
• Issue fixed: Visible locked features not working correctly on rail models. [RM-9497]
• Issue fixed: Unable to set Shoulder height to 2 inch for Cyl head shouldered ejector pin. [RM-9527] [SPR-9914500]
• Issue fixed: Prefix ist not set correctly for subcomponents in Library component assemblies while modifying. [RM-9532]
• Issue fixed: Components with manually changed names which still include prefix are renme to old name in case components is modifyied and the size will be changed. [RM-9542]
• Issued fixed: PTC waterline features are not colorized in Show Waterline command when exporting waterline model. [RM-9547]
• Issue fixed: Images in Component Dialog and not correctly displayed when initially starting the dialog and the screen resolution is smaller the the initial dialog height [RM-9551]

12.0.2.2

Bugfixes

• Issue fixed: Cannot load SmartHolechart due to invalid dll nam.[RM-9291]

12.0.2.1

Enhancements

• New function in Bill of MAterials: Delete all Balloons on Drawing with one click [RM-6237]
• STRACK component catalog updated [RM-9166]

Improvements

• Implement plausiblity check for cooling diameter values [RM-8944]

Bugfixes

• Issue fixed: Multiple problems with DME inch mold bases [SPR-8288021] [RM-8371]
• Issue fixed: In case 3+1 Pattern for guides is set and F Palte is switched to P plate the guide bores on second pattern ar e not surpressed. [RM-8885]
• Issue fixed: There is no dimension listed in detailed image and no "Size" nominal dimension available for hasco/single_locking Slider [SPR-9433504] [RM-8897]
• Issue fixed: Correct counter bore depth for flat head screws DIN 7894 [RM-9157]
• Issue fixed: If the option PRE_HIGHLIGHT_BEFORE_DELETE is set, the section is highlighted twice when deleting a component. [RM-9165]
• Issue fixed: Cooling components with option assembled on all models enable are assembled to often with component status [RM-9173]

12.0.2.0

Bugfixes

• New set of udfs have incorrect relation BENENNUNG=rel_modelname() which is added to all models, the UDFs are assembled to. [RM-9245]

12.0.1.0

Enhancements

• Implement new HASCO screws Z34, Z351, Z371, Z372, Z3721, Z721. [RM-8553]
• Implement new HASCO sprue bushing Z510, Z530. [RM-8553]

Improvements

• Improve messages in case of invalid license and invalid creo version. [RM-7335]
• Move Technology Colors Button in Ribbon from Preparation group to EMX Tools in Part Mode [RM-6656]

12.0.0.2

Enhancements

• EMX is now ready to be used with B&W SMARTColor. [RM-7943]
• Update HASCO Plates. [RM-6557]
• New STRACK Z4 latch lock. [RM-7540]
• New KNARR plates knarr_f (MEUSBURGER compatible) and knarr_k (HASCO compatible). [RM-7815]
• New KNARR guide components 551000, 551000DLC, 551010, 551010DLC, 551100. [RM-7815]
• Enable Spinbox in nominal values table of Component and Library Component Dialog to set minimal and maximal values [RM-8278]
• New Button with weblink to component data sheet in Component Dialog. Implemented for MEUSBURGER, HASCO,STRACK, KNARR [RM-8402]
• New KNARR ejector pins 39111, 39111DLC and 39414 [RM-8409]
• New KNARR insulation plates 77335 and 77336. [RM-8511]
• Show cooling threads not only with cosmetic thread but also with additional surface. [RM-7013]
• Rename quilt cut UDF group by parent model name. [RM-7425]
• New Lifter E3244, E3246 and E32481. [RM-8236]
• Add new Option SHOW_CHAMFER to display all Chamfer in all plates. [RM-8327]
• Improve Runner Library Components [RM-8262]
• Introduce new configuration file which allows user to define custom order number rules depending on supplier, unit, type and file names. Can be edited in EMX Options. [RM-7118]
• Introduce new functionality to trim ejector pin head against each other. [RM-6728]
• Introduce new Update Existing Ejector Pins Dialog which allows user to update ejector pins in case the required reference distance has changed [RM-7199] [RM-7344]
• Improve the performance of parameter write and read functions. Assemble 240 ejector pins is 45% faster, Open the BOM Dialog is 40% faster and close the BOM Dialog is 55% faster [RM-6945]
• New MEUSBURGER cooling component O-Ring E21311. [RM-8057]
• New MEUSBURGER ejector pins E17003 and E1723. [RM-8057]
• New HASCO slide plates Z555, Z556 and Z557 [RM-7319]
• New and updated HASCO ejector pins Z412, Z4650, Z4651, Z4670, Z4671, Z413, Z443, Z457, Z461, Z465, Z44, Z441, Z45 and Z451 [RM-6552]
• Allow user to toggle between Diameter x Length or XxYxZ value in Model Size Dialog. [RM-6724]

Improvements

• Improve shoulder screws functionality. [RM-7878]
• Designate screw_bore and cooling_bore entries as INCH or MM thread. [RM-8669]
• Component status should be enabled by default [RM-7762]
• Component editor - When adding a component with family table the nominal dimensions are not automatically listed [RM-7392]
• Do not set Option DEFAULT_WATERLINE_DIA to 8 mm. Set it to "-" instead. [RM-8383]
• Copy parameter from EMX_SURFACE_FUNCTION from quilt surface to cut surface. [RM-8397]
• Introduce additional ray algorithm for all kinds of components when searching for intersecting models [RM-8590]
• Waterline Designer: Components are always assembled to top assembly of working model. Auto cooling subassemblies are not considered. [RM-8293]
• Plate Dialog: Avoid interaction with plate features in case it is a standard plate. [RM-8113]
• Set Option SHOW_PRYSLOTS new default value to NO, use feature_data.txt values instead as default. [RM-8326]
• Duplicate Cavity: Use External Merge KE to create copies and avoid dependency with and modification of original manufacturing assembly [RM-8107]
• Ejector Pin Designer: Improve behavior of simplifier representation. [RM-8156]
• Improve Duplicate Cavity procedure to avoid invalid placement of reference parts. [RM-8219]
• Update DIN Screws. More lengths are now available. [RM-6307]
• Update existing MEUSBURGER E-components to latest state: 1st quarter 2019. [RM-8057]
• Model size algorithm improved: Some cylindrical parts are recognized as squared parts. [RM-6305]
• Images and thumbnail image for Library Component Editor are not created with imagemagick anymore. This avoids possible issues while creating gif images. [RM-7581]
• Agathon top interlocks should automatically assemble screws with additional fastener cutouts. [RM-6108]

Bugfixes

• Issue fixed: Components assembled from top assembly to top_sub_sub assembly loses reference when modified in top_sub assembly. [RM-6242]
• Issue fixed: MEUSBURGER pryslot features have invalid geometry.[RM-6397]
• Issue fixed: Ejector length is not calculated correctly if an offset is added to the ejector [RM-6398]
• Issue fixed: In case NAME_SUBASM_COMP option is active, predefined screws are not assembled to NAME_SUBASM_SCREW assembly [RM-6399]
• Issue fixed: Radius in Meusburger E1702 is not set correctly. [RM-7975]
• Issue fixed: Wrong screw core dia in DIN flat screws. [RM-8063]
• Issue fixed: Guide Bush E1105 needs additional nominal instance DM1. [RM-8237]
• Issue fixed: Avoid error message when start EMX. [RM-8324]
• Issue fixed: "One plate" option is not available for din screw DIN7991. [RM-8328]
• Issue fixed: Problems with cooling components in INCH assemblies. [RM-8372]
• Issue fixed: Problems with screw components in INCH assemblies. [RM-8382]
• Issue fixed: Unable to create Mold Base of size 7.875 x 11.875 for A-Series. [RM-8385]
• Issue fixed: Incorrect orientation of Inserted Screws. [RM-8387]
• Issue fixed: Relationship import from .rel files are wrong if converting is not UTF8. [RM-8393]
• Issue fixed: In case Creo is minimized with Moldbase Definition dialog open, Creo is set to a white screen. RM-8408]
• Issue fixed: Double and integer parameter values predefined at component templates are not recognized and overwritten by default values. [RM-8424]
• Issue fixed: Curves and components assembled with the Waterline Designer have a rotated position in case of invalid default coordinate system.[RM-8442]
• Issue fixed: Crash after second saving component dat file with Component Editor. [RM-8447]
• Issue fixed: Component drawings are always created even if CHECK_DWG_TYPES is disabled. [RM-8486]
• Issue fixed: Return Pins are not updated by Update Ejector Pins Dialog. [RM-8523]
• Issue fixed: The feature of cut_s in lifter E3246 is not correct. [RM-8533]
• Issue fixed: Assembly references can not be modified in AUTO_SCREWS. [RM-8552]
• Issue fixed: Turn Option is missing in E1144 guide components. [RM-8553]
• Issue fixed: Creo 6.0 with EMX 12.0 exits prematurely when changing Mold base size. [RM-8558] [SPR-8697407]
• Issue fixed: Failed to hide the machine part in the drawing view of EMX project assembly by Hide RMB command or layer status in EMX 12.0.0.0/11.0.2.0/10.0.0.0. [RM-8559] [SPR-8736403]
• Issue fixed: Crash in Show Waterline Dialog. [RM-8584]
• Issue fixed: Colors in Show Waterline Dialog have incorrect order when waterlines are defined with Waterline Designer. [RM-8589]
• Issue fixed: EMX crashes if cooling components are not selected (displayed) when creating waterlines in waterline designer. [RM-8591]
• Issue fixed: Ejector guide bush cutout incorrect if retainer plate ref distance > 0. [RM-8592]
• Issue fixed: When adding tolerances manually to cut out of UDF Dimension they are removed when modifying the component. [RM-8594]
• Issue fixed: Wrong display for holes in support pillar cutouts. D1 and D3 values inverted. [RM-8595]
• Issue fixed: Ejector Pin Designer does not work with auto sub assemblies (NAME_SUBASM_COMP) active. [RM-8598]
• Issue fixed: Working dir is changing when assembling Ejector Pins from Ejector Pin Designer. [RM-8602]
• Issue fixed: Incorrect angle "A" of HASCO Z01 pin. [RM-8627]
• Issue fixed: Dimensions for MEUSBRUGER insulation plate 1403 is wrong. [RM-8630]
• Issue fixed: Can not open drawings after renaming , [RM-8641]
• Issue fixed: Several issues in Update Ejector Pin Dialog [RM-8674]
• Issue fixed: Hasco Z35 Dowel pins cutout images are display flipped. [RM-6187]
• Issue fixed: Cooling cut outs can not be created in parts with assembly material cuts in case option ADD_COOLING_REF_IN_PART is set to YES. [RM- 7985]
• Issue fixed: Cut position for circlip in Hasco Z11 is incorrect. [RM-7973]
• Issue fixed: All components in old EMX 4.1 moldbase are deleted in case cooling component is deleted with EMX 10 and above. [RM-7939]
• Issue fixed: Offset value is incorrectly set when editing tolerance value in UDF Dimensions table [RM-7902]
• Issue fixed: Invalid UDF Dimension settings in Meusburger E2071 in case SECONDBORE option ist unchecked. [RM-7875]
• Issue fixed: Traceback while assembling ejector pins with component status dialog user is ask for trim surface. [RM-7847]
• Issue fixed: Drawing files are not found for library parts in case file name is defined capitalized, but file it self is named with lower characters. [RM-7823]
• Issue fixed: Delete toggle direction option for Stop Dics/Pins at all, because it is not working correctly. [RM-7822]
• Issue fixed: W value for RAIL_OFF feature of D plate of Pedrotti supplier is not correct with respect to the catalog [RM-7816] [SPR-8109506]
• Issue fixed: Open window title "Open comp_data.txt-file to split its content into separate *.dat-files" is not localized [RM-7656] [RM-8057258]
• Issue fixed: Dialog title "Main_Axis Position" is not localized for "Define Main Axis Offset" operation. [RM7655] [SPR-8057412]
• Issue fixed: Crash in Waterline Designer in case waterline is added to model with assembly material cut [RM-7587]
• Issue fixed: When assembling plates to the moldbase for some bores only one cylinder side gets colored. [RM-7584]
• Issue fixed: Files are not deleted from disc in case plate is deleted with "No Components" checkbox even if DELETE_FILES_AFTER_DELETE option is active. [RM-7585]
• Issue fixed: When placing cooling chanels in part mode invalid partname message appears. [RM-7660]

12.0.0.0

Enhancements

• Update to Smart Holechart to version 12.0.0.0.
• Enhancements to Moldbase Defintion: New summary tree with all plates, guides, screws, equipment listed. Improved placement of plates with right mouse butoon menu pane functions. Plates can be placed above and below existing plates. Guides can be placed with right mouse menu pane functions. Components can be deleted and modified with right mouse menu pane fucntions [RM-6033]
• Unicode characters are supported for filenames, parameter names and parameter values [RM-6798] [RM-6789]
• "Use One Model Rail" can be modify in Plate Dialog, The EMX Option USE_ONE_MODEL_RAIL only sets the default value. [RM-6289]
• Add new MEUSBURGER cooling component E20749 and E2074D. [RM-6717]
• Allow arrow keys in BOM to activate current cell and re-enter neighbored cell [RM-6385]
• Create button to reset component dialog settings from emx roaming folder. [RM-6028]
• In Plate Dialog a third visibility option "visible locked" is now available, which allows user to lock a resumed feature within the plate. It will no be suppressed during size change of the plate. [RM-6611]
• Clamping slots are now available for LKM side gate moldbases. [RM-6476] [SPR-7559604]
• Introduce new validated cut out udfs for ejector pins. Rework variable option behavior. [RM-6569]
• Update MEUSBURGER plate catalog to latest state of March 27th 2018. [RM-6230]
• Update KNARR ejector, guides, component data to the latest state June 14th 2018. [RM-5933]
• New udf cut out images for Cooling, Guides, Dowel Pins and Ejectors. [RM-6227]
• Add new EBERHARD ejectors 6116, 6118, 612R, 6143, 6178, 6261, 6271, 6281, 6331, 6335, 6341, 6351, 6361, 6371, 6381, 6441 and 6622. [RM-5843]
• Add new STRACK side interlocks W44, Z38 and Z46. [RM-5467]
• Add EMX Functions to Creo 4 Quick Access Toolbar. [RM-6152]
• Keep selection of selected datums when defining a new component. [RM-5291]