Changelog

13.0.3.8

Bugfixes

• Issue fixed: BOM has performance issues with Windchill [RM-13545]
• Fix smaller issues in Component Editor assembly references table

13.0.3.7

Enhancements

• Add new MEUSBURGER cooling components E20767, E20769 and E20809
• Add new STRACK pneumatic components Z139 Z5144, Z5145 and Z5146
• Add new STRACK slider holding device Z5129, Z5130, Z5131
• Add new STRACK stroke cylinders Z5100, Z5101, Z5102
• Add new STRACK thrust pieces Z3152, Z3154, Z3153, Z3156 and Z3158
• Add new knockout STRACK Z5085

Improvements

• Update STRACK components SN3550, Z7713
• Improve and simplify editing of assembly references in Component Editor

Bugfixes

• Issue fixed: In Modify Mode the inputpanel for partnames is disabled [RM-13437]

13.0.3.6

Improvements

• Improve Material file behavior. Remove Option MATFILE_EXTENSION. Files can be organized in subfolders (material/steel , material/alloy etc.). Search Behavior is now:

13.0.3.5

Enhancements

• Introduce xml based recipe files. Text based recipe files still work, but are handled as deprecated. [RM-12947]
• Add new MEUSBURGER ejector pins: E1770 (With air ventilation), E1780 (Cylindrical, Copper), E17109
• Add new PEDROTTI guide components: EBU2, EBU2B, EZP1H
• Add new PEDROTTI ejector pins: EES2CB, EES2DLC, EES2NL, EES2CL_2RAD, EES2CL_4RAD

Improvements

• Option "Add Cut Face in Owner does not exists anymore. Ray Tracing algorithm for cut out models covers edge cases.
• Update PEDROTTI guide components: EBU3B, EZP1
• Update PEDROTTI ejector pins: EES1, EES2, EES2C, EES2T, EE2CBM, EES2CL

Bugfixes

• Issue fixed: Regression: UDF Dimension tolerances are incorrectly set. [RM-12932]

13.0.3.4

Enhancements

• Implement Weblink button for Library Components. [RM-12872]
• Updated and new PEDROTTI guide components: EBU1, EBU1B, EBU1BG, EBU1H, EBU1HBG EBU1S, EBU1SBG, EBU1SH, EBU3, EBU3B, ECO1, ECO1H, ECO1S, ECO1SH, ECO2, ECO2E ECO2L, ECO2LC, ECO2SG. [RM-8894] [SPR-1327765]

Improvements

• Enable Spinboxes in Library Component Dialog [RM-12885]

Bugfixes

• Issue Fixed: Invalid BORE_REF_DIA in Parker O-Rings [RM-12873]
• Issue Fixed: BOM Table can not be sorted anymore by Item table line. [MR-12890]

13.0.3.3

Bugfixes

• Issue fixed: References for guide component meusburger E1330 are incorrectly oriented in case it is assembled from Moldbase Definition. [RM-12832]
• Issue fixed: BOM: In case Internal BUW_ORD_NAME component parameter is empty, the &bomname parameter name is always overwritten by modelname, if it was edited manually already. [RM-12834]
• Issue fixed: In case SAVE_SIZE_IN_EMPTY_ORDNUMBER is active and assembly component is placed while another assembly with equal subcomponents already exists the order is overwritten by size value. [RM-12836]
• Issue fixed: In library assemblies the parameters from sub components are not correctly updated in case they should be filled from dat file [RM-12841]

13.0.3.2

Improvements

• Make sure O-Ring in WEMA cooling components like S3102 etc. is displayed in rubber color [RM-12809]

Bugfixes

• Issue fixed: In case springs are assembled on multiple points only the last cutout ist created. [RM-12764]

13.0.3.1

Enhancements

• Improve spring component behavior. Introduce new flexbile springs and force calculation mechanism. Breaking Change: Compressions Spring is not part of Moldbase Definition anymore. New flexible springs are not compatible with Moldbase Defintion. Existing Springs can be modified and deleted like regular spring components. [RM-12328]
• Implement DME springs WZ8031TV, WZ8031TB. WZ8031TR, WZ8031VL, WZ8031V, WZ8031B, WZ8031R, WZ8031G, WZ8031A.
• Implement HASCO springs Z60, Z610, Z611, Z612, Z613, Z64.
• Add Mahr guide components N400, N421, N423, N425, N500, N501, N502, N511.

Improvements

• Improve MEUSBURGER Springs E1530, E1536, E15365, E1537, E15375, E1538, E15385 E1539, E1541, E1542, E1543, E1544, E1545 and E1546.
• Improve STRACK Springs SN2520, SN2540, SN2560, SN2580, SN2590

Bugfixes

• Issue fixed: Model Drawing of ejector pins is not correctly deleted in case type changes with same partname. [RM-10695]
• Issue fixed: Integer parameter is reset to default value in case cutout dimensions are edited. [RM-12303]
• Issue fixed: When loading a PCS mold base into Expert Moldbase Extension the graphics window shows a rectangle for the guided ejection leader pin. [RM-12274]
• Issue fixed: Option PREVIEW_VIS_STYLE does not work as expected [RM-12331]
• Issue fixed: Crash when using "Remove all components to start with a blank Moldbase. [RM-12325] [SPR-13227636]
• Issue fixed: In case component is modified, checked in into Windchill and Name does not changed during modification. [RM-12098]
• Issue fixed: Cooling components created with Option NAME_SUBASM_COMP active and ADD_COOLING_REF_IN_PART can not be redefined, in case Model needs to be exchanged, due to external references. [RM-12101]

13.0.3.0

Enhancements

• Add STRACK OXA plate size.
• Add new Hasco components [RM-10793]: Z98HT, Z21, Z031, Z032, Z811HT, Z4501, Z458.
• Update existing Hasco components: Z03, Z11, Z40, Z43, Z50, Z81, Z511, Z555, Z556, Z557, Z691, Z721, Z725, Z811, Z051, Z94, Z942, Z1212, Z1213, Z185, Z9430.
• Remove obsolete Hasco components: K100, K1000, K107, K500, K501, K505, K506, TD(tubular dowel)
• Add missing Meusburger cooling component E2101. [RM-10520]

Improvements

• Show Library Component Dialog again in case assemby references are not yet fully defined and user select OK button. [RM-11675]

Bugfixes

• Issue fixed: Missing translations in BOM column names. [SPR-12814097] [RM-11863]
• Issue fixed: Copy drawing will not ignore for plates if option EMX_CHECK_DWG_TYPES is set to "-". [RM-11674]
• Issue fixed: The assembly of the ejectors fails with different assembly directions for a reference part with the error "Cannot assemble the cutouts.". [RM-11559] [SPR-1241162]
• Issue fixed: Balloons can not be placed within local sections on drawing views. [RM-12050]
• Issue fixed: ibrary component fails to cut one of the parts. [RM-11393]
• Issue fixed: Message, which tells user that a guide or screw diameter is different compared to required diameter in moldbase defintion, is not informative. [RM-12088]
• Issue fixed: In case udf group is part of refrence pattern and leader group is not inside of model, UDF gets deleted while modifying component (e.g. second rail model) [RM-12087]

13.0.2.6

Bugfixes

• Issue fixed: When set region language format as Korean, Select RMB menu for EMX , premature exit happen in Creo Parametric. [SPR-12643151] [RM-11296]
• Issue fixed: Issue with CUT_DIA and CUT_FREE values in DME guide R04W. [RM-11295]

13.0.2.5

Improvements

• New config option LIBRARY_DISABLE_MANUAL_PLACEMENT_WITH_INCOMPLETE_REFERENCES to disable manual placement by component interface assembly for library components in case of incomplete assembly references. [RM-11605]

Bugfixes

• Issue fixed: Highlighting of components in drawing only works for first sheet. [RM-11645]

13.0.2.4

Bugfixes

• Issue fixed: Config Option CHECK_DWG_WHEN_OPEN_BOM does not work with active Windchill workspace [RM-11602]

13.0.2.3

Bugfixes

• Issue fixed: Problem with renaming of subcomponents in case of ids of component and owning subassembly are equal [RM-11594]

13.0.2.2

Bugfixes

• Issue fixed: For large drawings with many balloons, BOM in drawing mode and Balloon creation is too slow. [RM-11582]

13.0.2.1

Improvements

• Improve algorithm when transfering surface parameters from reference part to extract parts. [RM-11256]
• Improve set position behavior when reopening dialogs on multiple monitors. [RM-11252]

Bugfixes

• Issue fixed: Highlighting of components does not work anymore in drawing. [RM-11185]
• Issue fixed: Some menus in Simplified Chinese version EMX 13.0.2.0 are not translated by yet, for example, "Hydraulic Component", "Pneumatic Component", "Fluid Components" and "Remove all Components by Type" under EMX 元件 tab [RM-11297] [SPR-12581939]
• Issue fixed: Udf name is not taken into account in chamfer size rules. [RM-11329]
• Issue fixed: Parameter Designation status is not removed in case definition was changes from YES to NO. [RM-11377]
• Issue fixed in DIN580 screw [RM-11521]
• Issue fixed: Problem with line Up and down pushbutton in case of empty cell values. [RM-11541]
• Issue fixed: Renaming problem in Library assemblies where subcomponents are assembled multiple times. [RM-11553]

13.0.2.0

Bugfixes

• Additional fix for: HASCO core retainer plates can not be selected. [RM-10792]

13.0.1.0

Enhancements

• Add new and update existing D-M-E Europe locating rings: F1360, F1367, RB, DHR21, R19, R20, R22, R23, R40, R60, R60L, RB60 and RB90
• Add new and update exisitng D-M-E Europe guide components: R01, R02, R03, R03W, R04, R04W, R05, R08, R09, APD, IPWC, IPNH, FBC, FBN, FSC, FSN, FB120, FB140, FW14, GB112, GB113, GB114, GEB, TD, ZH, F1000, F1010, F1020, F1030, F1040, F1100, F1110, F1120, F1121, F1125 F1126, F1127, F1140, F1144, F1145, 1150, F1332, FW1213. [RM-9347] [RM-9346]
• Add new and update existing D-M-E Europe support Pillars: SP, FW28, FW29.
• Add new and update existing D-M-E Europe ejector pins: CHE28, EAH28, ENA05, ENC05, EOA05, EPA05, EPC05, EPD28, ERA05, ERFAQ, EDC, EDH, PCM, FW, FK, S, KS, EAV, F2R and F4R. [RM-10587]
• Add D-M-E Europe knockout components: F1050 and 1515.
• Add MEUSBURGER knockout component: E1515.

Improvements

• Move MEUSBURGER knockout E1514 from screw to knockout category.
• Improve MEUSBURGER ejector package guiding unit with collar E1325
• Improve MEUSBURGER ejector package guiding unit E1330

Bugfixes

• Issued fixed: ssue in Meusburger component E3143_ and E3141_. [RM-10311]
• Issued fixed: Creo Parametric configured with EMX exits prematurely when modifying surface in mold assembly. [RM-10395] [SPR-10621485]
• Issued fixed: Ordernumber of Meusburger F53 plates is not correct. [RM-10541]
• Issued fixed: Dimension error in MEUSBURGER E3119 silder component. [RM-10544]
• Issued fixed: IdentifyTrimSurfaces functionality is not available anymore in Part and Assembly Mode [RM-10579]
• Issued fixed: Invalid Dimension in Meusburger FM90 babyplast guide package. [RM-10602]
• Issued fixed: Do not allow to define a new ejector with existing modelname. [RM-10718]
• Issued fixed: In case different ejector typ is selected and nominal values are not selected the ordernumber is incorrect. [RM-10719]
• Issued fixed: Automatic chamfer creation does not work for patterned components. [RM-10736]
• Issued fixed: Wrong BORE_REF_DIA values in HASCO cooling component Z98. [RM-10789]
• Issued fixed: HASCO core retainer plates can not be selected. [RM-10792]
• Issued fixed: Crash in case floating licenese is released and flexlm version is 11.12 and older. [RM-10848]

13.0.0.4

Bugfixes

• Issue fixed: Colors are not applied in Show Waterline

13.0.0.3

Enhancements

• Implement command to calculate outline for all models in assembly and update &size parameter [RM-10255]
• Highlight all changed size values in BOM in case all models size are recalculated. [RM-10291]
• Introduce Button in BOM to calculate size for selected models on right mouse button. [RM-10292]
• Add default parameter value &drw_exists to write drawing existing status to models. [RM-10296]
• Implement button on right BOM mouse menu to reset changed size to current parameter value. [RM-10301]

Bugfixes

• Issue fixed: Crash when updating patterns in mold bases with assembly cuts. [RM-10275]
• Issue fixed: When modifying library assemblies which are created by component editor part names rules of sub components are incorrect. [RM-10276]
• Issue fixed: Regression in BOM_BALLOON_CUSTOM_PARAM. Part parameter of type string can not be written. [RM-10287]

13.0.0.2

Bugfixes

• Issue fixed: EMX Command Pneumatic components not avavilable in ribbon.

13.0.0.1

Enhancements

• New EMX Commands for Hydraulic and Pneumatic components. [RM-5448]
• New dialog to delete all components of selected type. [RM-6079]
• IGES, STEP, DXF export in BOM Dialog works with Windchill and active workspace. [RM-7497]
• Introduce new Option SOLID_TOLERANCE_STANDARD to allow user to specify the solid tolerance mode. [RM-7901]
• Add Options to automatically created chamfers in UDFs for all kinds of components. [RM-8991]
• Implement command to transfer surface parameter from reference parts to mold volume extracts. [RM-9894]
• Add MEUSBRUGER guides E5140, E5152 and E5202. [RM-9900]
• Update MEUSBURGER components to latest state: 2nd quarter 2020. [RM-10028]

Improvements

• Improve cutout creation in case cooling components are placed on flat reference surface, but ray hits angular surface. [RM-9736]
• Implement way to check for multiple types of licenses (Advanced and Standard) in license.ini.[RM-10026]
• BOM_BALLOON_CUSTOM_PARAM works with component parameters as well [RM-10081]

Bugfixes

• Issue fixed: Missing entries in bore_screw.cfg for 1.4 and 1.6 mm bores. [RM-9633]
• Issue fixed: Problem in Knarr insulation plate 77336. [RM-9668]
• Issue fixed: "G" Character is missing in for non-ISO mm threads, instead "M" is displayed. [RM-9716]
• Issue fixed: In case insert mode is activated and insert position is below or inside of a group, the new reference and cutout UDFs will be assembled inside of UDF. [RM-9734]
• Issue fixed: Eyebolts two features in cavity plates are not centered. [RM-9760]
• Issue fixed: Missing Transparency in color of EMX plates. [RM-9792]
• Issue fixed: Issue with counter bore depth value in flat head auto screws. [RM-9821]
• Issue fixed: Invalid relation in template file of guide_e1144. [RM-9833]
• Issue fixed: Unable to change thickness of Meusburger Side Interlock. [RM-9883]
• Issue fixed: Length and Width values of standard plates can be change when Special shape is set. This can lead to incorrect order numbers. [RM-9985]
• Issue fixed: Ejector pin Symbols are only created on one cavity insert. [RM-9987]
• Issue fixed: In case mold base size changes and option keep plate thickness is set, in case no valid instance was found order number changes to P plate. [RM-9994]
• Issue fixed: In case model is tagged as purchased part in BOM, sub comps are still listed in Repeast region on drawing. [RM-10007]
• Issue fixed: In case of option pattern on all models and models are assembled on symmetric angles analysis feature in refgroup fails. [RM-10012]
• Issue fixed: Problem with EJP_ORIGIN_MOLDBASE coordinate system in assembly when placeing ejector pins. [RM-10027]
• Issue fixed: Add missing counterbore in meusburger guide components E1100 and E1105. [RM-10034]
• Issue fixed: Wrong GUIDE_BORE_LEADERPIN_SPECIAL diameter in plates meusburger F55. [RM-10109]
• Issue fixed: In case ejector pin is defined on multi point feature and partname is e.g. 29 chars it can occur that individual partnames can not be created. [RM-10143]
• Issue fixed: Regression: Option USE_SHORT_NAME_TRIM_EJP does not work correctly. [RM-10144]
• Issue fixed: References in Rotfix features of ejetor pins need to be verified to avoid failing of feautres when rotfix rotation value is edited. [RM-10145]
• Issue fixed: In case option EXCL_SIZE_CALC_PARAM is used, the size format includes an additional "=". [RM-10165]
• Issue fixed: Dimensions of sub components are not set correctly when archiving instances of assemblies in Component Editor. [RM-10169]
• Issue fixed: In case Modfiy Project is run on an active Workspace, the drawings are not correctly renamed. [RM-10170]
• Issue fixed: In case drawings is created during project modification with active Windchill, there are still ghost objects of skeleton and machine in workspace. [RM-10173]

13.0.0.0

Enhancements

• Cutout creation works for multi body parts. [RM-8238]