EMX Changelog
16.0.7.2
Enhancements
- Add HASCO cooling component Z9425, Z9425VA, Z87, Z87VA, ZI81 [RM-18545]
- Implement configuration option to allow setting of 'Special Shape' by default and allow manual editing of main plate dimensions for listed suppliers. [RM-19066]
- Implement configuration option BOM_ALLOW_EDIT_PROJECT_PARAMS to manual editing of project parameter in BOM [RM-18976]
Improvements
- Make sure COOL_CORE_DIA for all cooling bore entries is based on the actual bore drill diameter related to this thread [RM-18955]
- Improve automatic length calculation of ejector pin d-m-e inch SND sleeve. [RM-18830]
Bugfixes
- Issue fixed: correct radius R2 in Meusburger guide componnet E1030. [RM-19093]
- Issue fixed: correct data file for cooling component Meusburger E2079 to set drill point angle on edit. [RM-18961]
- Issue fixed: No P-Plates available for inch DME Cavity plates on the moving side. [RM-19057]
- Issue fixed: In case parameter with default rule, e.g. &partid is used in config option PARAM_EJP_ENGRAVED_TEXT values are only written to ejector pins and can not be edited [RM-18977]
16.0.7.1
Enhancements
- Introduce functionality to save configuration to current session only. [RM-18624]
Bugfixes
- Issue fixed: Problems with renaming of plates and preview of components in case creo config option "save_file_iterations"" is set to "no". [RM-18599]
- Issue fixed: Component Editor - Archive all instances on assembly does not set dimensions correctly for first instance of subcomponents. [RM-18655]
- Issue fixed: Cooling bore data - inch BSP threads COOL_CORE_DIA values are incorrect. [RM-18662]
- Issue fixed: Festo QS-G-I and QS-R-I pneumatic components have invalid rule in UDF dimension POS_ARROW in case counterbore option is unchecked. [RM-18674]
- Issue fixed: Flexible guide components with quilt cut creates cutout within model itself. [RM-18581]
16.0.7.0
Enhancements
- Update SmartHolechart to Version 16.0.7.0 [RM-18561]
Improvements
- Allow flexible items for guide components. [RM-18330]
- Consider existing designation status for BUW_INCLUDE_IN_BOM component parameter. [RM-18534]
Bugfixes
- Issue fixed: Exception during modification of patterned ejector pins with option "engraved texts". [RM-18490]
- Issue fixed: Crash in case of modification of return pins from moldbase definition with ative option "engraved texts". [RM-18487]
- Issue fixed: "Unhandled Exception" returns when trying to define or modify cooling components "ETP/Pipe Plug" from Pedrotti supplier. [RM-18436] [SPR-15667745]
- Issue fixed: List of part names is incorrect in component editor in case sub components are assembled twice. [RM-18407]
- Issue fixed: Regression in Option SAVE_SIZE_IN_EMPTY_ORDNUMBER. Order number parameter is not empty but is overwritten with size. [RM-18355]
- Issue fixed: In case template assembly is selected and user wants to open LoadMoldbaseAssembly Dialog an exception is thrown. [RM-18309]
- Issue fixed: Make the part name rule for side interlock part E1323 independent from the side. [RM-18297]
- Issue fixed: Remove meusburger_fb and meusburger_fw files from recipes suppliers.[RM-18303]
16.0.6.2
Bugfixes
- Issue fixed: In case option "assemble predefined screws" exist in dat file and models with assembled screw is modified to different instance: auto screws are only deleted for first instances. [RM-18142]
- Issue fixed: If a article with more than 32727 surfaces is to be transferred, the “Transfer area parameters” command is interrupted.[RM-18284]
16.0.6.1
Bugfixes
- Issue fixed: Engraved text parameters are overwritten with default value in case Update Ejector Pin Dialog is used. [RM-18077]
16.0.6.0
Enhancements
- Update SmartHolechart to Version 16.0.6.0 [RM-18020]
Bugfixes
- Issue fixed: Preview for flexible spring throws exception in modify mode. [RM-18013]
- Issue fixed: Creo Save Command is not canceling EMX dialogs anymore. Templates can be overwritten in installation in case component is previewed [RM-17998]
- Issue fixed: Traceback in case Component Dialog Preview is used and user tries to modify feature of preview model [RM-17974]
- Issue fixed: In case a component is modifed, the assembly references are changed, preview is clicked and component is finally assembled, the supressed original model is not correctly deleted. [RM-18001]
16.0.5.1
Enhancements
- Update SmartHolechart to version 16.0.3.2
Improvements
- Enhancements Engraved texts for ejector pins. New Option EJP_ENGRAVED_TEXT_TYPE: sketch can be set as contour or middle line. parameter defined in PARAM_EJP_ENGRAVED_TEXT will only created at ejector models. [RM-17885]
- Update existing MEUSBURGER components to state April 2024.
Bugfixes
- Issue fixed: Trim-To-Geom feature for ejector pins causes crash in case reference part is a multi body part and first body contains no solid. [RM-17798]
- Issue fixed: EMX Groups are assembled inside of existing group in case insert mode is active below existing group. [RM-17820]
- Issue fixed: Model Size of Incomplete tessellated parts can not be calculated anymore. [RM-17819]
- Issue fixed: Crash in library component editor in case assembly and part have same file and type name. [RM-17817]
- Issue fixed: Improve HASCO Z051 top interlock. Cutout is not correct. [RM-17874]
- Issue fixed: Ejector Pin Designer: REF_PLANES have invalid offsets in reference model in case constraint assembly reference csys is shifted in positive direction. [RM-17896]
- Issue fixed: Meusburger guide component E1562 template has invalid LG1 dimension. [RM-17948]
- Issue fixed: Hasco guide component Z0100 has wrong values for RAD dimension. [RM-17941]
16.0.5.0
Improvements
- Avoid creation of automatic chamfers between fluid bore intersections [RM-17634]
Bugfixes
- Issue fixed: Transfer of interface parameters from library parts does not work as desired [RM-17649]
16.0.4.1
Enhancements
- Add new feature to assemble engraved text notes for ejector pins. [RM-16657]
Improvements
- Update SmartHolechart to version 16.0.3.1
- Update existing HASCO components to state April 2024.
- Update existing KNARR components to state February 2024.
- Improve performance of additional chamfer creation in case of multiple point features. [RM-17082]
Bugfixes
- Issue fixed; Invalid values for radii in KNARR ejectors 326141 and 326141DLC. [RM-17538]
- Issue fixed: Misumi EPH ejector pin does not create a udf at first position. [RM-17511]
- Issue fixed: Invalid values for radii in KNARR ejectors 326141 and 326141DLC. [RM-17538]
16.0.4.0
Improvements
- Update existing MEUSBURGER components to state January 2024.
Bugfixes
- Issued fixed: BOM: assemblies tag as purchased part: All subcomponents are not correctly ignored in repeat region of drawing. [RM-16721]
16.0.3.1
Enhancements
- Add STÄUBLI CBX and CBI connectors to Hydraulics. [RM-16823]
- Add KNARR stainless steel screw eyebolt 40811 to components. [RM-16807]
Improvements
- Improve STÄUBLI RMI and CBI conectors. Make sealing and BF Option available. [RM-16822]
Bugfixes
- Issue fixed: Setting up different guides supplier for moldbases in supplier_settings.txt file does not work as expected. [RM-16977]
- Issue fixed: CopyFile can fail on network drives, in case cache files are not synced fast enough. [RM-16949]
- Issue fixed: Hasco plate size 100x130 and 100x130 has invalid dimensions in clamping plate K10 and ejector base plate K70. [RM-16867]
- Issue fixed: It is possible to set main axis offset even if plates are assembled that have a locating cut feature delivered from the supplier. [RM-16791]
- Issue fixed: Crash in Bill of Materials Dialog in case edit cell is active ab Tab button is pressed. [RM-16779]
- Issue fixed: Reference patterns are incorrectly created in case references datum plane is first feature in reference group udf and selected surface is part of a pattern [RM-16746]
- Issue fixed: Performance issues on large assemblies with multiple patterned assemblies [RM-16650]
- Issue fixed: Rabourdin screw 1021: order number different from instance. [RM-16719]
16.0.3.0
Improvements
- Update SmartHolechart to version 16.0.3.0
16.0.2.1
Enhancements
- Add new HASCO Guide component: Z1300
- Add new HASCO Ejector Pins: DLC shouldered Z4430, cylindrical air-ventilated pin Z401
- Add new HASCO Top Interlocks: Cubic interlocks Z060 and Z080, spacer plate Z081.
- Add new HASCO Side Interlocks: Z085.
- Add new HASCO Attachment components: Flange Z167, Cycle Counter A5730, A5730HT, A57300, A57300HT, A5731, A5732
- Component Editor: Enhance functionality to enable editing of subcomponent instances dimensions. [RM-16954]
Improvements
- Introduce parameter EMX_EDGE_CHAMFER_IGNORE_FEATURE which allows to ignore edges from a certain feature for additional chamfer creation. [RM-16562]
- Update existing HASCO ejector pins, guides, locatings rings, screws, top interlocks data to state mid 2023.
- Introduce separate bore_cooling.cfg files for inch and mm. [RM-12618]
- Do not ceil length in ejector note with NR_DIGITS_BOM. Instead always use NR_DIGITS_COMMON. [RM-16394]
Bugfixes
- Issue fixed: Crash in Model Size Dialog in case use tries to select another model in Part Mode. [RM-16350]
16.0.2.0
Enhancements
- EMX integrated into Applications group of Creo [RM-15590]
16.0.0.0
Enhancements