Buildcode

Date

Enhancements / Fixed Issues

M027

23.07.2018

Bugs

#6737 Component Dialog is incorrectly rendered in Creo 3 M170

M026

06.09.2017

Enhancements

#5367 Ordering numbers of support, ejector pins, screws and guide components are wrong after size-change

#5358 Enable Features driven by Options also for Library Components

#5204 When working with ADD_COOLING_REF_IN_PART, make sure Parameter BUW_PROJECT_SHORT is in all plates

#5186 Do not set Layers when switching the main Simpreps

#5126 Allow UDF's in components with parameter BUW_GUIDE

#5108 Enable usage of partname-wildcards <partid_refx> also for predefined components

#5107 Increase number of allowed characters in EMX Options>Part Names>Partname-Column from 32 to 50 characters

#5079 Code Improvement: Introduce enum for ReferenceTypes and refactor code

#4580 Add components KNARR core pins 37121, 37411, 37666, 37418

M026

06.09.2017

Bugs

#5275 When Modifying component and supplier is changed, name is not updated.

#5221 Hasco Z10 guide bush toggle orientation when changing moldbase size

#5206 External Data of Smart Holechart gets lost when renaming parts

#5203 When modifying parts with RMB in old 4.1 moldbase-assemblies, EMX crashes

#5191 Multiple usage of preview button does not reset the display style

#5106 The sketch cool_plug_symbol is not added to plates when defining a pipe-plug component

#5105 Shoulder values LG2 for EHS-ejector pins are wrong

#5081 When defining cooling comps in partmode in components assembled more often, cooling comps are assembled multiple times

#5075 Pattern with two members are not handled properly in GetSavePatternMembers

#5073 Finish incomplete data for Knarr ejector pin 37414

M025

19.05.2017

Enhancements

#4701 Enable additional Angle value for Rotation fixture of Blade Ejector Pins

#4719 Use same pattern behavior for Library Components and Regular EMX Components

#4730 Enhance Search function for Library component (search for pathnames, too)

#4894 Add new option ALLOW_SIZE_EDIT for manual setting of moldbase width and length

#4939 Allow usage of <user_number> as placeholder in partnames.cfg

#5002 Allow adding of comp-subassemblies in "Modify Project" if NAME_SUBASM_COMP is not "-"

#5014 Consider insulation thickness for total moldbase height shown in Moldbase Definition

#5052 BOM: Show how many objects were found with search panel

M025

19.05.2017

Bugs

#5064 UDF-dims are not read properly when reading default file from roaming folder

#5061 Already defined TrimFaces in are not listed in part mode

#5058 Negative regenerated dims are toggled when modifying a library part

#5049 Ordering Number parameter is set back to Default with Edit BOM Entry Dialog

#5047 DME, PCS and PROGRESSIVE support pillar auto screws are not working correctly

#5046 MEUSBURGER Ejector Base Plates and Ejector Retainer Plates have missing width value in order numbers

#5026 Rename MEUSBURGER slider set E3001 to "Single_Locking" because it is not a Meusburger catalog slider set

#5009 Use different design of spring model HASCO Z60

#5008 Autoscrews in components of patterned assemblies (i.e. slider-sets) are assembled only once

#5000 Avoid Project Name, Prefex and Postfix starting with a blank

#4992 No tolerance is assigned to DIAMETER in udf EJP_CB_CHAMFER, dimensions have been reordered

#4991 Tolerances in Component and Plate Dialog are displayed (lower/upper) instead of correct standard (upper/lower)

#4978 Wrong german descriping text for Option SAVE_LOCAL_PARAM_IN_ASM

#4972 When define cooling comps in partmode the "Predefined"-button is activated even option ADD_COOLING_REF_IN_PART is YES

#4970 Format value of project parameters is not applied when parameters are read from assembly (SAVE_LOCAL_PARAM_IN_ASM=YES)

#4937 Section views and other related features are deleted when removing EMX components.

#4902 If user has specified ejector bore options with 4 digits, EMX does not find the correct row

#4900 AUTO_PINS and AUTO_SCREWS can not be redefined and deleted

#4897 Ejector pin UDF's are temporary removed even they are still valid for a new type

#4895 Default Tolerance for UDF-dims is defined wrong

#4876 Add Transparency column in Technology table of EMX Options to be edited manually

#4857 Tooltip for function Export XML is missing in BOM Dialog Box

#4809 Problem with new diameter symbol in EMX

#4220 After Selection of different component type for cooling and ejector pins the option pulldown is reset to the default value

M024

31.03.2017

Enhancements

#4870 When working with AUTO_SUBASM and use 41_predefine_screws/pins, place components in the auto subasms

#4850 Tyco: Interaktion BOM Application und EMX Stückliste macht Probleme bei Familientabellenteilen

#4793 Ship new Holechart types with all EMX-boretypes and formats

#4781 Remove Option USE_41_SCREWPIN_PREDEFINE. Use the old method for screws and pins automatically in any case

#4779 Allow usage of RMB-EMX functions also when selecting a refgroup instead of the component

#4764 Place a second csys with different orientation on EMX_MOLDBASE_ORIGIN in all plates

#4677 When open BOM check Relations form rel-files and add them in case they do not exists

#4620 Provide a Find Function in EMX BOM dialog box

#4578 Add Meusburger Babyplast/Mikroformen - Serie FM

#4551 Enable an Option to create alternative CSYS with different Name and Orientation but on ORIGIN MOLDBASE postion in all assemblies and plates

#4547 Enable Option to rotate two-parted rails around 90°

#4400 Add DME inch side interlock PMX to emx components

#4366 Allow display of parameter value in subassembly pulldown instead of assembly model name

#4269 Add missing component Meusburger E1690

#4081 Extract Waterlines: Add Functionality to extract cooling circuits for each plate

#3454 Create EMX Option to predefine the additional bore depth "T5" for cooling with "Use Curve Length" enabled

#3321 Implement Hasco K45 Transversal Mold Plates

M024

31.03.2017

Bugs

#4871 If predefined components exists multiple times, they are not assembled in all places properly

#4862 Data for Ejectorpin EPH is wrong

#4857 Tip: BOM Export XML is missing

#4847 When project paramters are read from assembly, Designation Status is not verified

#4845 SET_EMX_DTL does not work with EMX_USER_CONFIG_PATH

#4822 Partnames are different for Screw-Washer assemblies placed as predefined component

#4819 Avoid crash in Project Modify if current Moldbase has no Project Parameter

#4809 Problem with new diameter symbol in EMX

#4789 If a library component interferes more than one comp, the cut dialog box does not show properly

#4780 Guide offset and eyebolt-diameter for LKM moldbases is wrong

#4772 Problems when working on 4.1 moldbases with EMX9

#4753 Problem with CPL Side Interlock from LKM

#4752 Wrong dimension in parker O-ring.

#4744 Labels in Optionmenu when selecting instances in comp dims table are not sorted in correct order

#4743 PCS Stepped Ejector Pin: Hole in Retainer Plate are too small

#4728 Missing instances in compdata of WEMA s3115 cooling component

#4622 Exporting BOM to Windows Clipboard also takes the Hidden Parts List.

#4283 Silder Meusburger E3030 is not created in WF4 and cannot be used in Wildfire 5

M023

06.02.2017

Enhancements

#4086 Model Size shows calculated size from largest to smallest dimension

#4550 Enable Option to show cooling plug symbol in part drawing

06.02.2017

Bugs

#4654 Cutouts for Hasco Z37 are wrong

#4708 BOM Ballon id string parameters are filled with empty strings in case of multiple drawing sheets

#4469 Patterned cutouts features of Meuburger E1330 guide component will fail when modify to another instance

#4643 Misumi stepped ejector pins must be named EHS instead of ESH

#4648 The cut info for screw_6 (spring plunger) is wrong

#4649 When predefine 4.1 screws with spring washer, they will not be assembled later

#4651 Ejector pins placed on top of core models cause wrong cutouts in the core-plate

#4653 Material 1.0718 for Hasco spring plunger Z37 is missing

#4655 Hasco Z37 cannot be placed with an OFFSET

#4656 The spring washer in folder x_meus_screw_2.gif is hidden by layer

#4661 UDF ejp_blade_no_cb was missingHannes Weber2017-02-06 14:46

#4692 UDF dimension tolerance values are not set to a certain default (-0.000/0.000) when creating the cutouts

M022

21.12.2016

Enhancements

#4624 Enable Ctrl+X and Ctrl+V in BOM Dialog to Cut and Paste BOM List Entries

#4619 Remove unused material-pulldown in Plate Dialog box

#4579 Knarr ejector Pins: Add Round Types 37414, 37555 and 37888

#4577 Enable variable L2 length for shouldered ejector, especially kanrr 36111

#4573 BOM Table in default Drawing is to large

#4572 Default BALLON_SIZE in EMX Option to 5

#4571 Check dat files of hotrunner library components

#4548 Implement WEMA cooling components S3102, S3105, S3111, S3113, S3115 and S3117

#4546 Add Opportunity in BOM to mark external/purchased assemblies in BOM Dialog to ignore all subassemblies and subcomponents

#4545 Optionmenu for subassembies in Component Dialog is to small for long assemblies names

#4537 SetTolerance Standard to ISO/DIN in function "check_models_in_dir"

#4422 Add Abzugsgewinde Option to Screws

#4268 Add Threaded Bolt Meusburger E1514 to screw components

#4266 Add missing Meusburger Components E1032

#4265 Add Locating Ring Meusburger E1362

#4018 Knarr Ejector Pins: Add 36555 and 36599/ Update 36111 and 36414

#3222 Enable angular Cut Outs for Screws, Pins etc.

21.12.2016

Bugs

#4625 Do not write EMX_BOM_INFO when migrating old library parts or split comp_data-files

#4621 Avoid negative value for CLP_BORE_CB_DEPTH when open 4.1 clamping plates

#4617 Error in text/german/emx_partnames.txt

#4608 BOM-data of EMX4.1 plates and components is not converted properly

#4607 Offset dimension is not syncronized with T1 dimension for cooling components

#4582 For Plates Checkbox Copy Drawings is always set to CHECKED even if Option SAVE_DRAWINGS is set to NO and plates are not listed in option EMX_CHECK_DWG_TYPES

#4560 Open locks in parameters of component Meusburger E1144 after regeneration

#4552 Erase rule-based layers from EMX template models and clean up 00_BUW_DATUM

#4549 In BOM Material pull down replace "_" with "."

#4544 Correction of ballons fails on multiple components in subassemblies, only 1st ballon is corrected

#4506 Units of component E2071 are set to mmNs instead of mmKs

#4496 TECH-Parameters/-Colors are missing for some EMX-UDFs

#4451 Size Volume Calc retrieves wrong values in EMX

#4407 Slider Meusburger E1032 has wrong assembly references

#4303 Baffle cutouts Meubsurger E2108 and Hasco Z965 are straight holes which is no correct due to data sheet

M021

04.11.2016

Enhancements

#4467 Increase max param number range for individual subassemblies

#4464 Check wether SortPARTID via integer does make sense

#4448 When creating Project from existing template replace project short in Parameter REL_MODEL_NAME in models and refgroups

#4439 When finding old "meusburger_2008" components, convert BUW_SUPPLIER automatically to "meusburger"

#4428 Add second bore / counter bore option for E2071

#4402 Enable opportunity to ignore GROUP_COLUMN lines in emx_bom_adv

#4380 Reduce usage of ProMdlDisplay when creating a project to increase performance

#4354 Create new Option WINDCHILL_AUTONUMBER to used windchill auto renaming mechanism for EMX Projects

#4352 Add B&W floating license buttons to EMX Ribbon by default

#4320 Improve and refactor procedure for creating new projects from templates

#4282 Correct Strack Z17, Z18 Locating Rings and Z45 side interlock components

#4280 Avoid pop up of single Componente vizualization when assemblying components, e.g. assembly via component status dialog

#4272 Add Option RotFix 4 for simplified Meusburger Rotfixes

#4256 Calculate Model Outline: Ceil calculated value to avoid outlines that are a bit smaller then exact outline

#4177 Allow predefined default subassemblies with NAME_SUBASM_COMP for Sliders, Lifters and Latchlocks

#4114 Auto Update for Screw Lengths when Check/Uncheck Option Checkbuttons (Especially Counterbore)

#4090 In BOM check entered value if format fits the predefined type in the EMX Options (int, double,string)

#4085 Add opportunity to avoid creation of solids while extracting cooling circuits via Show Waterlines function

#4080 Check and Improve functionality: Lock/ Unlock BOM Pos ID

#4079 BOM Ballons: Allow placement of multiple ballons for each components e.g. in 2 different views

#3209 Components: Implement a way to add EMX component relations to the postregeneration area

#3087 Plate Dialog: Creation of plate drawings is only possible during definition, not while modifing a plate

04.11.2016

Bugs

#4460 Number of lines in component relation files are limit to 30 characters

#4450 When changing subassembly in library dialog box before chosing a type, EMX crashes

#4449 Dont show dialog "Select components that should be cut" if CUT_PLATES_ONLY is set to YES

#4446 When changing subassembly in library dialog box, its size increases each time

#4445 When adding comps in Subassemblies, save MAX_NUMBER-Params to the chosen subassembly

#4441 Library Component Dialog: Parameter set is not updated instantly when selecting different instance

#4427 Waterline Designer does not apply counterbore option for default components

#4420 SHC License is not released with B&W Floating License Type

#4410 Problem placing ejectors in multi point feature.

#4405 DuplicateCavity: Add stable CopyGeom functionality without udf, use toolkit functions instead

#4398 Meusburger guide E1110 and E1110_ slot position for circlip is incorrect

#4397 Cavity Layout: Offset values are reset to when single cavity assembly instance

#4378 E2071 When selection different instance of component offset value is added to previous value

#4376 E2071 Expanger Plug has incorrect partnames entry

#4375 E2071 bore diameter in comp data is to big

#4335 When changing subasm via option menu in ComponentDialog, PlateDialog, LibraryDialog, Parameters with &prefix, postfix and &projectname are not updated

#4334 Size value is written into ordernumber while opening BOM, but it is not updated in case part dimension have changed

#4316 When creating new Project from template and versioned models (*.1 *.2) exist, the versioned template models are not deleted from working directory

#4304 Check LKM Side Interlocks in inch

#4297 In case EMX Parameter Type is changed from STRING to INTEGER, e.g. POS with &pos_id, the Parameter Value can not be updated

#4294 When Option SAVE_LOCAL_PARAM_IN_ASM is set to YES local parameters are not inherited to regular EMX subassemblies

#4281 Create and Modify Project: Project Name Project Prefix and Project Postfix Parameters need to be set correctly on EMX Project Assemblies, Models and Refgroups

#4279 Create Project and Model Assembly process is very slow with Windchill enabled due to ProMdlDisplay and Creo 3

#4277 Wrong entry for ordernumber in size file Meusburger

#4276 Wrong entries in order number rule in default partnames.cfg

#4275 Component Dialog: In case alternative Part Name Format is used for Sub Components the Mdl pointer can not be found during FillDialog and Modify Mode -> Wrong Sub Component name in input panel

#4274 Component Dialog in Modify Mode for subcomponents "Is Standard Part " values is not read from component

#4273 Component Dialog in Modify Mode for subcomponents "Add to BOM " values is read from component

#4270 In case AUTO_SUBASM_NAME is active and "Assemble again" or "assemble as a copy" for component is used, component is placed outside its respective subassembly

#4250 Unit and supplier of sprue puller pin are not set when changing moldbase size

#4216 Crash in BOM Dialog with Option PART_RENAME_FORMAT in case rename format is invalid

#4211 Assembly receipts do not sore position of side interlocks properly

#4210 Load Receipt with Ejector Pin Guide Pillar E1330 and AUTO ASMS causes trouble

#4209 In case NAME_SUB_ASM Option is not "-", components are assembled to auto asms, When Modifiying component, subassembly option menu is always set to main assembly

#4208 When Modifying Project with SAVE_LOCAL_PARAM_IN_ASM=="YES" and CREATE_LOCAL_PARAM=="YES", still checkbox for creating local param is not enabled

#4197 Check correct componentstype when consider multiple Auto screws in subassemblies, only "screw" and "dowel_pin"

#4190 Stäubli File was created in Creo 3.0

#4183 Multi Cavity: Copy of reference model dose not find all body surfaces for copy geom

#4178 Check Part ID Mechanism for default subassemblies

#4176 Missing Material for Meusburger Plates 1.2738

#4169 While Redefining components via Moldbase definition dialog already changed model name is ignored and reset

#4168 Show model size result with 3 digits

#4160 Set Accuracy does not set accuracy for in main assembly of EMX

#4089 Deleted relations after Modifying the component

#4087 Adjusted Column Width in Bill of Materials taable in not stored and always reset to Foramt predefined in EMX Options

#4000 SPR Task: 4518891: Size value is not retrieved into model parameter for Expert Moldbase Extension components such as screw, ejector pin

#3250 While Modifying components it is not possible to change the subassembly

M020

29.07.2016

Enhancements

#4171 Avoid disassembly of equipment parts when use "unselect all" in component status

#4109 Drop "PTC" from all text strings due to Rebranding

M020

29.07.2016

Bugs

#4135 Stored options from the roaming folder are not set properly when reopen the dialog box

#4153 SPR5822494 When assemble slider E3024 the second time, the screw is with incorrect size and model name

#4154 Since replacement of ProMdlRetrieve Winchill standard parts are no longer loaded properly

#4157 Add missing materialfile 2738 that is used in tvmp-plates

M013

01.07.2016

Enhancements

#2561 BOM: Enable display of "Common Name"

#2897 When clicking on the model name in the BOM in drawing mode the balloon dissapears if already set. Move this functionality to RMB

#3099 Save the Volume of a model as DOUBLE-Parameter in ModelOutline Dialog box

#3632 Add Component Spring Meusburger E1546

#3647 Add Locatingrings Hasco K107, K501, K506, K1000, Check Locating Ring K100

#3660 Verify and add all PCS ejector pin types

#3662 Add PCS inch Toplocks "TL" to EMX components

#3663 Update all PCS inch Support pillars

#3737 Provide opportunity to write alle EMX Parameters quickly to none EMX parts

#3817 Add Misumi cooling components NPW and M-KOC

#3823 Add guide component Hasco Z040 and Meusburger E10025

#4017 Allow balloon placing in a loop when selecting multiple entries in BOM

#4073 Highlight the subassembly-pulldown in Component dialog so users verify if the chosen subasm is the correct one

#4082 Check and Update Hasco O-Ring Z98 instances

#4095 Add Misumi Top Interlock TPN

#3604 Prevent user from entering prefixes and postfixes which are too long

#3755 Update Futaba Plate Sizes File to current catalog state

#4010 Auto Length of Ejector Pin is not calculated when changing type via option menu

#4022 Improve Pattern Dialog, increase width

#4068 Increase Speed of BOM Table

#3664 Check PCS inch locating rings

#3768 Add check for Creo4 in EMX9-dlls with warning: Creo4 is not supported, use EMX10

#4027 Check EMX 9 with Windows 10

M013

01.07.2016

Bugs

#3071 Waterline Designer: Waterline table head columns are not localized

#3248 Moldbase Definition Dialog: Pattern Scheme 3 is not painted in the Top View

#3283 Components: UDF dimension DM1 is listed twice for Support Pillars

#3472 Mold Base size Information is only read while change size but not when leaving and reentering the Dialog -> Screws are not correctly preselected

#3613 Official PTC Diameter Symbol can not be displayed in BOM

#3715 Dowel Pins: Redefine window occurs in case ref point is not defined directly on ref plane

#3718 SPR 5317415 Position of EMX_CAVITY_REFPLANE_FH" and "EMX_CAVITY_REFPLANE_MH is wrong

#3783 In case Assembly and a parth within assembly have same name assembly is not automatically set to hidden area

#3784 In case assembly and part with same name are summarized in BOM

#3793 LKM side interlock PLX crashes during assembly

#3805 SPR Task: 5603706 : Cooling component dimension D1 doesn’t update when the parameter COOL_CB_DIA changed from EMX General > Project > Options > Cooling Bore Data > COOL_CB_DIA.

#3824 Add missing material SKH51 for misumi ejector pins

#3828 When working with PDM_SYSTEM=0, do not use ProMdlRetrieve but ProMdlLoad to avoid commonspace issues

#3830 Library part seal_dics had unknown PARAM_WERKSTOFF COPPER

#3880 Problem with placing Set Screws

#3930 ScrewHole pattern of isolation plate E1402 does fit the cataloge

#3957 Spaces in Projekt Prefix can cause trouble in Windchill

#3978 Waterline Designer: Enable deleting form list with e.g.RMB

#3988 Waterline Designer: Sketch Planes get lost while switching to 2nd working Model

#3989 Waterline Designer: Check hidden status of models during selection of working models

#3993 Its not possible to enter Ordering numbers in EMX Options with more than 32 characters

#4000 SPR Task: 4518891: Size value is not retrieved into model parameter for Expert Moldbase Extension components such as screw, ejector pin

#4013 E10025 Leaderpin has order number entry in DWG_TITLE and DWG_TITLE2 in BOM

#4016 Defined Main Axis Offset is reset when changing plate thickness in Moldbase Definition Dialog

#4020 Ordernumber Parameter of guide bush is unlocked when changing a plate size in Moldbasedefinition Dialog with Componentstatus disabled

#4025 Meusburger Top Interlock E1310 male part was wrong cone values

#4028 Correct side Interlock Hasco Z18/Z19

#4034 Change Project Dialog crashes during Opening in case BUW_PROJECT_NAME Parameter in EMX Main Assembly was changed manually and exceeds 32 characters or has spaces

#4050 Project Change does not rename the moldbase drawing

#4062 Add missing DLC coated Meusburger Guide E10125

#4063 Add Knarr Ejector Pin Type 37999

#4065 Crash in BOM Dialog when Copy/Paste items with more then 1 Lines selected and the first line selected

#4084 Ejector Pin Preview does not work properly, rotation angle is negativ

#4091 Option USE_41_SCREWPIN_PREDEFINE does not work at all

M012

01.04.2016

Enhancements

#3691 Show result depending on selected unit from radiog group in model size Dialog

#3665 PCS - Sprue Bushings: Add Series "A" and "Extensions", Update Series "B" and "U"

#3604 Prevent user from entering prefixes and postfixes which are too long

#3516 SelectTrimSurfaceDialog is too slim

#3496 If placed a Guide or pin with shoulder is a countersink needed for every used plate

#3495 Add option to use a snap ring E1575 with Meusburger Guide E1110

#3470 Several material file are missing the MASS_DENSITY value

#3404 Add missing HASCO component: Angular Pin Z010

#3399 While Changing Component Type via Mold Base Definition Dialog defined dimensions get lost and need to be redefined

#3253 Check the Special Shape Functionality in Plate Dialog

#3210 Parameters in Structure Plates

#3207 Multi Cavity Dialog: Automatically save copied cavity assemblies after creation process

#3028 Configuration: Spaces in EMX_USER_CONFIG_PATH cause configurations to load only partially

#1121 Add a 4th column with values between 0 and 1 in file color_definition.cfg to define a certain transparency for the tech-colors

M012

01.04.2016

Bugs

#3747 Inch decimal value 1.190 is transformed by accident to 1-No10 in Support Pillar Dialog

#3744 If a Parameter from type PRO_PARAM_BOOLEAN exist, do not overwrite it if the values fit already

#3732 The function "Finish Project" does not remove all suppressed plate features

#3719 Material file P20 used in all LKM-plates is missing in components/mm/material

#3718 SPR 5317415 Position of EMX_CAVITY_REFPLANE_FH" and "EMX_CAVITY_REFPLANE_MH is wrong

#3716 SPR Task: 5317417: The location of EMX_CAVITY_REFPLANE_FH and EMX_CAVITY_REFPLANE_MH in skeleton is not correct for lkm_pin_ponit_gate or lkm_three_plate_type moldbase

#3711 Wrong values in Hasco Z11 comp_data.txt

#3707 Feature PRYSLOT2 in plate_5_is template was stored in resumed state.

#3614 Mulity Cavity: While Copying components with Multi Cavity material properties are not copied as well

#3609 Bill of Material does not show drawings when working with PDMLink

#3608 The Function IsNumeric was corrected

#3605 Strack Z51 side interlock can cause collision in practical

#3600 SPR Task 5258835: Creo Parametric 3.0 exits prematurely when selecting Assembly Definition in specific assembly in EMX 9.0

#3591 Inch plates display annotations in metric style

#3585 In Component Editor no Reference can be added to component

#3565 When searching for dependent Refgroups in DeleteIn3D the search algorithm needs to be checked

#3561 String param_value_for_err is missing in gui_messages

#3532 Meusburger Toplock E1310 does not regenerate

#3521 EMX Main Assembly is erased from memory when: Assembly e.g. top lock, assembled predefined screws, delete top lock again

#3519 Mouse ear diameter is not written to skeleton model, missing when loading receipts

#3490 INCH LKM Top Locks are not defined correctly

#3478 Components: Hasco top interlock Z051 has incorrect values

#3472 Mold Base size Information is only read while change size but not when leaving and reentering the Dialog -> Screws are not correctly preselected

#3469 Crash while changing mold base size in Moldbase Definition Dialog

#3457 Drawing areas in Mold Base Definition Dialog can not be found correctly for some screen resolutions

#3456 Mold Base Definition Dialog: Centering Sleeves changes length will mold base size is changed

#3453 In case an instance in compdata.txt contains a column SIZE the SetzeMasse() function writes this value into the SIZE Parameter from parameter.cfg

#3447 EMX Bill of Materials (BOM), Incorrect filled Parameter PART_NO, PROJECTNAME, PROJECTPREFIX and SAP_BOM_NAME

#3446 Bill of Materials: Hide all summarized components when toggling visibility status of parent line

#3445 EMX Bill of Materials (BOM), Change Parameter at Main Assembly

#3444 SPR Task: 5191260: ANSI standard screws inserted in Expert Moldbase assembly displays dimensions in ISO standards.

#3443 SPR: 5191143 Unexpected Group "AUTO_LIBTHREAD" in library parts after assembling assembly from library with cutout

#3442 Lifter does not accept negative offset values one patterns with even numbers 2,4,6 etc.)

#3437 Slider Component Dialog Resizes when changing Type

#3431 Cooling Meusburger E2002 missing dimension DM3 and M

#3408 While deleting Rails from plate stack and rails are assembled in SubAsm, second model of rails is not deleted from model

#3388 EMXParameterLoeschen: No Parameters will be deleted

#3386 Ejector pin length is to long when defining multi ejector pins with EMX Option ENABLE_MULTI_EJP

#3385 Mutli ejectors are NOT created when defined on multi points for predefined ejector pins

#3377 Inch components have wrong unit system (IPS) Inch-Pound-Seconds instead of Creo default Inch-Lbm-Seconds

#3372 Material syntax in DME plate files has wrong syntax missing "1."

#3371 Material files are missing the MASS_DENSITY value

#3369 Plate parameters filled from size-files are not applied to the 2nd model of the rail

#3337 For PxC only: when saving current model name in refgroup, it will not work for cooling components

#3319 URGENT - File for DME plates is missing all the instances.

#3286 The Locating Ring offset is reset to 0 when changing the type

#3281 Slider does not accept negative offset values

#3280 Crash while Redefine Point Reference with cooling components already assembled

#3254 Wrong reference in BOM after switching HASCO side interlocks Z07/Z17.

#3245 "Select Ejector Pin owner model" does not work in case group with EJP_ORIENT_SYSTEM already exists in model

#3242 EMX 9.0 F003: PCS 1114A-17-17 Mold Base (INCH)

#3068 EMX option USE_41_SCREWPIN_PREDEFINE does not work

#2616 Components: Errors in PCS inch mold bases, add additional PCS, Progressive and DME components

#974 C11810411/SPR2208154: EMX option "AUTO_REASSEMBLE_ALL_TYPES" doesn't work for library component.

M011

01.02.2016

Enhancements

#3091 Redefine cooling UDF cool_thread_single_cb_chamfer.gph to be able to create the chamfer corectly also on angled bores

#3210 Parameters in Structure Plates can be filled from entries size-files

#3336 With new partnames.cfg, all predefined components have side-index "-"

#3227 Angled UDF's add to place Angled Pins

#3218 Enable usage of USER_NUMBER in BOM

#3214 2D symbols added for blade and tubular ejector pins

#3193 Add missing meusburger hoistring E1272

M011

01.02.2016

Bugs

#3386 Ejector pin length is to long when defining multi ejector pins with EMX Option ENABLE_MULTI_EJP

#3385 Multi ejectors are NOT created when defined on multi points for predefined ejector pins

#3240 Missing cuts when datum plane is used as placement ref for two screws

#3221 When redefine a cooling bore, the T1-value is written to the A-Value.

#3204 Rename Extracts in Classify Dialog does not work properly in MFG Mode

#3203 In Cavity Pattern Dialog entries like -0 and 0.123e-123 occur

#3201 EMX standard assembly Meusburger E1310 has wrong entries for the instances of the subcomponents in the comp_data files

#3189 When changing EMX options digits with pulldown , value and description are written to value cell

#3184 Crash: In EMX Options change configuration and directly click "Modify"

#3123 Unit factor for OFFSET is not applied during Preview if moldbase and component (e.g. Screw) have different unit system ( MM and INCH)

#3121 Part GUIDE_6.prt in INCH has the REF_PLANE on the wrong side of the lock

#3106 Cannot archive all instances of ASMs in Component Editor

#3089 Consider negativ regenerated dims when updating plate dims

#3319 File for DME plates size_396.446.txt is missing all the instances.

#3286 The Locating Ring offset is reset to 0 when changing the type

#3271 Wrong values in Holokrome SHCS 1/4-20: tap hole is at .210" instead of .201 for a 1/4-20.

#3270 Several DME-inch locating rings had wrong geometry

#3254 Wrong reference in BOM after switching HASCO side interlocks Z07/Z17.

#2783 BOM Entry is not correct for the meusburger ...s rails and ejector plates

#3322 REF_ANGLE in predefined components is doubled during assembly process

#3305 In case proe language is set to a not supported language the EMX language is not set to usascii

#3275 When setting certain options to "-1" (i.e. EMX_TOL_MODE) it is stored as "-"

#3273 Geometry of Hasco Z1100W is wrong: cutout for spring washer is missing

#3268 Tube Dowel in DME Inch Moldbase A Series are of 2” which is not incorrect. Correct size is of 1.875.

#3223 Crash when sorting list of waterlines in cas components are already assembled

#3219 WaterlineDesigner: When entering non numerical values into sketch plane Z position cell value is not written back

#3149 EMX does not consider a round part to be a cylinder when calculating the size

#3147 Parts renaming with option PART_RENAME_FORMAT in BOM dialog box does not work

#3127 When saving a assembly in Mold Base Definition, Insert data and groove information is not stored properly

M010

18.12.2015

Enhancements

#3212 The Video for the WaterlineDesigner should be shortened or splitted to max 3MB pro video to can fit into the PTC learning exchange

#3064 Calculate Interference needs not be improved e.g. display while zoom and rotate

#2989 Redefine of constraints for trimmed ejector pins assembled "As Copy" does not work problerly

#2964 Set default of ENABLE_NONE_CATALOG_PLATES to YES

#2963 Review the OLH Document for the Waterline Designer

#2937 Value length of the EMX Parameters should be limited by the property "Format" in the EMX dialogs

 #3227 Angled UDF's to place Angled Pins

#3218 Artikelnummer ERP-System in Stückliste anführen

#3214 Need the extra 2D symbols for blade and tubular ejector pins

#3193 Add missing meusburger hoistring E1272

#3134 Verify T1 counterbore depth for Z31 and Z32 flat head screws

#3118 Add missing instances of ejector KNARR 38188

#3091 Redefine cooling UDF cool_thread_single_cb_chamfer.gph to be able to create the chamfer corectly also on angled bores

#3001 Check and correct customized Meusburger top interlocks

#3000 Add special name for ejector pins with Autolength option to indicate they need to be manufactured

#2970 Add components STRACK guide screw R1031

#2936 EMX Option EMX_CHECK_DWG_TYPES doesn't work properly

#2801 Allow predefinition of checkbutton KeepSizeAndPattern

#1814 Enable new axis-placement for Anglepin E1032 lässt sich nützlich platzieren

#1001 Enable display of size-content like this X=xx Y=yy Z=zz

M010

18.12.2015

Bugs

#3129 Meusburger Flansch hat nicht alle Bemassungen zum Auswählen verfügbar

#3120 Windchill/EMX: Check out Window appears multiple times in BOM

#3116 D2-Diameter for HASCO Bushing Z10 is 47.5 mm instead of 48 mm

#3108 Waterline Designer: Crash: Open Waterline Designer > Edit Component in Dialog > Close WaterlineDesigner > Close Component Dialog

#3107 Waterline Designer: Not all Waterlines are found in EMX 9 tutorial assembly

#3105 Waterline Designer: Can not assemble cooling components with orientation surface reference

#3088 CALL12737990: Cooling comps are not assembled in the correct subassemblies

#3078 When clicking on the Lock/Unlock button in ther BOM the picture disappears

#3074 EMX does not consider Multipoint Features as reference if thn a MERGE-feature

#3068 EMX option USE_41_SCREWPIN_PREDEFINE does not work

#3063 Guide Bore in Meusburger Aufbau 446x396 ist 41.4 der Leader Pin dagegen hat 42

#3054 Interference check in Opening Mold Base Simulation does not work

#3039 Guide bushes are not displayed properly in the Mold Base Designer

#3034 When reading options, the system language is used instead of PRO_LANG-settings

#3029 Set Force and minLG for all springs to PULLDOWN instead of DISABLED

#2995 The handling of m_OptionPartner of Options defined in comp_data does not seem to work

#2984 Preview images for Meusburger Spruebushes do not match to the nominal values

#2983 Overview image for Meusburger ejectors with option "use as corepin" is wrong

#2971 WATERLINE_DESIGNER_XESC_CREATE only creates crosssections of the current working model

#2969 The Transmision from hasco fails from regenerating in EMX 9.0 M010

#2967 Do not modify Material and parameters for Standardparts (Windchill)

#2957 EMX crashes when manipulate models not checked out from commonspace

#2947 OFFSET value doesn't work for INCH ejectors. It works correctly in MM.

#2944 C12787001 Correct wrong guide and clampscrew pattern data in Futaba FG - using latest PDF catalog

#2934 Fehlerhafte Bohrtiefe E2100 Umlenkblech EMX 8.0 M24

#2933 Special character in message files like % or & must be escaped with %% or &&

#3137 Cannot created instances of hasco Z98 o-rings in component editor

#3135 EMX crash while modfication of assemblies if number of subcomp is smaller then number of assembly instances

#3123 Unit factor for OFFSET is not applied during Preview if moldbase and component (e.g. Screw) have different unit system ( MM and INCH)

#3122 When using 3+1 pattern in P-Plates while guide components are assembled, cuts will miss on second guide scheme later

#3121 Part GUIDE_6.prt in INCH has the REF_PLANE on the wrong side of the lock

#3117 Cooling Components Modify: Crash of EMX if second orientation plane has wrong orientation

#3110 Predefined blade ejector in part mode with certain ref angle e.g. 67 > The cuts out are created mirrored

#3109 In Creo 3 in case slider assembly has errors and delete it with "Remove Component" complete mold base assembly is eraesed from session

#3106 Cannot archive all instances of ASMs in Component Editor

#3089 Consider negative regenerated dims when updating plate dims

#3085 Din 6325 pin with blind hole crashes Creo or doesn't create the cutout

#3073 EMX Library Delete Nominal dimension does not delete all entries from table --> Can cause crash when try to re-enter table entry

#3072 Calculate Clamping Force functionality crashes with traceback.log

#3046 EMX crashes if Sprue Bush was defined via MoldbaseDesigner, then directly deleted afterwards with RMB and Again try to open the Sprue Bush Dialog via Moldbase Designer

#3041 When components on patterns are edited to another instance via Mold Base Designer, it switches back to previous instance when entering dialog again.

#3033 For Ejector Guide Pins the first entry in list is a Guide Sleeve

#3030 The set screws from Meusburger (E1230) are created with a counterbore

#3005 Cooling UDF's in inches need an extra regeneration

#2992 Slider dialog box: While pushing preview button the image is not displayed properly

#2991 Meusburger Slider E3001 cut quilt does not contain the guide bars

#2987 "Merge with CSYS parent" does not work for Meusburger slider E3001

#2981 Ejector Base Plate thickness of DME B-Type is wrong for certain sizes

#2973 When assembling Z25 pins from Hasco Creo goes in the Failure mode

#2950 Description and Value of EMX Options get mixed up in EMX Option dialog box

#2935 Automatic names for Cavity plates in EMX 8.0 M024 are inconsistent for IS and AS plates

#2888 SPR4805522: Unexpected behaviors for spring update

#2883 When working with auto-subassemblies and redefine components with RMB, they are not replaced properly

#2793 Material file cannot be found when setting the Option MATERIAL_EXTENSION to MTL and using a *.MTL file for assembling Meusburger plates

#2792 Meusburger Slider E3001 does not regenerate

#2789 Ejector Pin Modify: Crash of EMX if second orientation plane has wrong orientation

F003

01.10.2015

Enhancements

#2906 Avoid interference of inch ejector pins with retainer plate

#2898 Provide ejector sketch udfs for all types of ejector pins

#2894 Develop a way to display the ejector pin type in the ejector retainer plate as engraving

#2854 Remove Hasco Plate K41, K71 and K61 as they are no longer supported

#2849 Set proper default for the waterline diameter in Waterline Designer

#2847 Add Parameter BUW_PART_ID to extracts in MultiCavity so they are displayed as wireframe automatically

#2815 Provide check-dlls for all B&W Flexlm releases

#2811 Avoid regeneration error for the Skeleton feature "sketch2" if no plates are assembled

#2787 Create Parameter ROT_FIX with value YES/NO to Ejector Pin when Rotation Fixture was defined

#2778 Check Staeubli Cooling Components provided by Teracad and implement them into EMX

#2755 Waterline Designer for Multiple part instances

#2615 Add Rabourdin Guide Bolt to the EMX database

#2552 Use NR_DIGITS_BOM in any case (even when set to 0) for calculating the SIZE-Parameter

#2502 Allow specific setting of SUBASM-naming wildcards in stored moldbases

#2496 Waterline Designer Icon into better position of EMX9 Ribbon

#2495 Add Missing tool tips and menu entries to Waterline Designer

#2490 Create the EMX ribbon also for the MFG mode EMX9

#2471 Delete Single Waterline Dialog

#2455 Write emx.log in CWD when starting EMX

#2450 Show all valid cooling circuits in Table and delete Add Button

#2436 Use EMX Technology colors for Waterlines to add waterlines to

#2432 Draw Waterlines: Allow to add additional working Models during active Drawing Session

#2395 Create different waterline models for ES and IS

#2345 Add Meusburger latchlock E1820

#2340 Improve placement of Meusburger E2071 ball plug

#2312 Delete obsolete code which is never reach in function ChangeUDFDimList_AfterEditTK()

#2301 New Icons for new Component Editor

#2248 Restructure Draw Waterlines Dialog

#2192 Set option EMX_CHECK_DWG_TYPES to a meaningful value

#2030 Delete Wildfire 4 Konfiguration for EMX9

#2021 Do not automatically set predefine flag for cooling comps when work in partmode

#2012 Save modified PROJECTNAME; PROJECT_PREFIX and PROJECT_POSTFIX in any case in all models when rename a project

#2010 Add catalog date in the EMX_TYPES section of the comp_data.txt-file to indicate last actualisation of the types catalog data

#1791 Improve the user experience within the technology color dialog

#1724 Check important config.pro option during EMX startup and print warning if values affect EMX

#1718 Show radii of ejector pins and their placement angle in preview

#1507 Place component GIF- and Detailimages no longer in supplier-folder but in component folder (i.e. component/mm/screw

#1461 Automatic assembly cut adjustment after editing a EMX component

#1247 Activate the "Copy Drawings" option also when a drawing with the instance name of the current component is present in the template folder

#1029 Allow usage of space characters in sel_list -entries

#1028 Enable the pulldown in the Component dialog box for parameters with a "sel_list.txt"-entry

#1017 Add missing cooling components from meusburger

#762 Provide round ended cutouts for baffles

F003

01.10.2015

Bugs

#2907 Cannot drive features of library parts by options in GUI

#2902 C12737684/Only one clamp screw FH is assembled instead of the whole clamp screw FH pattern

#2901 C12737392/Unable to load stop screw when loading customized moldbase

#2900 C12752900/Error about "Microsoft Visual C++ Debug Library" will return when attempting to define customized slider

#2876 When Checkbutton Switch partname was toogled during first Assembling and Component is modified ComponentDialog thinks that Partname comes from Parameter

#2868 Remove all inch HASCO catalogs

#2857 Part name can not be changed manually in Library Component Dialog

#2852 Clamping slots are on wrong side for DME Moldbase

#2850 Allow usage of working models with same feature id in Waterline Designer

#2842 PCS Moldbase of 09.875x11.875 (1012A-17-17) - Screw are of incorrect length.

#2841 PCS Moldbase of 09.875x11.875 (1012A-17-17) - Guide Bushes are not at correct locations.

#2840 PCS Moldbase of 09.875x11.875 (1012A-17-17) - Tubular Dowell OD and length is not correct.

#2839 Redefine Point Feature does not work for Creo3

#2838 PCS Moldbase of 09.875x11.875 (1012A-17-17) - Diameter value 0.0904 on Top Clamping plate (CLP_PLATE_FH001)is incorrect.

#2837 PCS Moldbase of 09.875x11.875 (1012A-17-17) - Bushing holes: There are two holes at center on Top cavity plate, should be one.

#2836 PCS Inch 1012A-17-17 template still contains issues

#2830 STOP-SYSTEM and STOP SCREW Length had been wrong in all Meusburger sizefiles created by Macro

#2824 Reduce number of patterns in the Guide Scheme Pulldown of Moldbase Definition to 3

#2812 Display a rectangle with the moldbase size in top view of EMX9 M010 if no plate is defined

#2807 The CUT_DIA value for pedrotti EBU3 ejector bushing is wrong (26 instead of 28 for nomdim 20)

#2788 Erase OPTION AllowMouseWheel == 0 from ressource files in EMX9 and EMX10 for Creo3

#2761 BOM in Drawing Mode, Flag "Ballon be or not to be" info gets lost after Copy Paste of entries and is only correctly when BOM-Dialog is closed and reopend again

#2740 Define placement surface for stop pins for all inch suppliers to the ejector base plate bottom face

#2739 When editing a plate in new Moldbase Definition, its no longer display in red color

#2728 Minimal Zoom in Moldbase Designer is to small for INCH Moldbase

#2727 The measure-menu is not translates and has no functionality behind

#2726 If cavity assembly is added to mold base but "Use size of selected cavity" is not set to yes in classify dialog the MoldbaseDesigner will paint a very large blue square to side view

#2724 In MoldbaseDesigner: Scrolling the mousewheel will cause changes in supplier option menu, which is not wanted

#2722 For Inch Moldbases Scrolling in SideView and Top View is very slow

#2720 Wrong bore-depth values for DME plates cause expensive reparation

#2718 Initialize all member variables in constructor for Release Mode

#2715 BUW_TKUIComponent Variable comp_type is not initialized in constructor: In Release Mode it is always assigned 0 (BUW_UICP_Tab) instead of default -8.....

#2714 LibraryComponentDialog: EMX crash when selecting Lib comp, set AKT_INSTANCE_ID > 0 and the switch to a new lib comp with only 1 instance

#2643 While pressing ENTER in temporary option menu in tables is active, dummy cell name is written to table

#2638 Crash wenn ich eine Waterline lösche auf der ein Turnplug liegt

#2637 Waterline Designer: ALternative Komponente wählen geht nicht mehr

#2636 Grid width wird beim initialen zeichnen von Waterlines nicht beachtet

#2633 Strange Behavior while entering offset value into Dimension Table of Component Dialog

#2632 Graphik Aufbau nach Change all cooling diameter braucht sehr lang

#2623 Some EMX GUI Files Text conversions are incorrect

#2619 Waterline id is used for renaming point feature without initalization --> Crash in Release Mode

#2616 Bugs in PCS Inch Moldbases, Add further PCS, Progressive and DME Components

#2614 Colors of cooling component cuts dissappear from the plates after regenerating

#2610 Compare Release dll vs Debug dll results of regtests

#2603 No OFFSET defined for Meusburger E2079 in mm cooling compdata.txt

#2591 Found in F002 due to regtests: When chaning a plate, alle feature-dims become "0", so all feature are suppressed!

#2589 Edit BOM Entry Dialog position and size are not saved after OK or Cancel

#2588 Library Component Dialog: Expanded and Collapsed Folders in tree are not shown

#2586 Classify Dialog: If Type is changed via Dropdown menu, value is not asigned to cell directly

#2585 Add pulldown for sel_list parameters in Edit BOM Entry dialog box

#2584 Crash in Classify Dialog when double click on empty cell

#2582 Moldbase Definition Dialog: Feature Visibility is not update after Pushing OK button in Plate Dialog --> Wrong Display in 2d View

#2579 Checkout models from SAP with PDM_SYSTEM==3 does not work

#2578 Images in right side of Multi Cavity dialog are not displayed properly

#2577 Image in tree of classify dialog box are not displayed at all

#2573 Allow searching for model drawings also in the windchill workspace, not only on the local drive

#2550 Add new EMX option that defines how EMX should generate ordering number of special plates

#2546 Cut for guide pillars is not created when assembling them on clamping plates with existing holes

#2537 Improve access functions for RMB-functions. Dont show them if the clicked comp is not an EMX component

#2529 "Add to BOM" Flag of LibraryDialog is not saved to Libray Component

#2525 Cavity Plate length and width is reset to 246x246 for all Moldbases when open Moldbase Definition twice

#2524 If the EMX Assembly is not regenerated, the RMB Modify Component and Delete Component doesn't work anymore.

#2523 Changes on Parameters in ComponentDialog, Library Dialog & PlateDialog are not saved to component

#2514 Handle problems when retrieving receipts with subassemblies included

#2512 Optionen Dialog: Parameter names can be set twice

#2510 Shifting of Knots in z-direction thru Knot Dialog not correct with Sketch plane concept

#2508 No description Picture for type "connector" in waterline List

#2505 Crash bei Edit Waterlines ohne aligned knots

#2503 Cutouts image for Meusburger Cooling Nipple is wrong (does not show curve-reference)

#2498 EMX crashes when saving modified technology colors

#2497 Dont set SHC_USER_CONFIG automatically using the content of EMX_USER_CONFIG_PATH

#2494 EMX opens modify Component Dialog even if component needs regeneration or has failed references

#2493 Cannot save/load moldbases with EMX9

#2492 Update emx9 ribon for MFG-mode and add Datum-Menü in EMX Components group.

#2489 Old Waterlines with id higher then 10 cann not be reade properly by WaterlineDesigner

#2487 Modified Waterline Udf loses Draw Waterline Parameter COOLING_BORE_SOLID

#2474 Add Ejector Plate and Ej Ret. Plate in the mold assembly dialog, the location of assembled back pins & screws are incorrect in EMX 9.0 F000

#2473 Counterbore cannot be created when placing cooling on exiting cooling hole using use model thickness

#2453 Combobox for diameter in waterline list dialog at wrong position

#2435 Only one cooling channel is dyed if inlets are set at both ends

#2434 Error in Assembly process does not delete waterline from list

#2431 Draw Waterline: solve Issues when shifting sketch planes via sketch plane table

#2401 ANY PLATE in feature_data.txt causes trouble

#2393 Draw Waterline crashes if referenced surfaces of components are not in model any more

#2391 Component with no udfs hide the udf dims table and picture

#2357 In NomDimTable of ComponentDialog preselection of instances in 2nd pulldown does not work if 1st pulldown contains a string

#2333 Hasco Z33 Screw may have wrong placement references

#2331 Adding a Tubular ejector in a certain position fails

#2329 SPR 2260073 Some hole/revolve features, made by Screws, cooling components and ejector pins have axis that do not adapt to the geometry size in the drawing.

#2328 Toggle Direction is not working

#2327 When assembling dowel pins the bores are not created correctly

#2326 For the meusburger ejector E1700 the cut is not correct:

#2314 When opening the BOM and calculate size, the SIZE Parameter is not saved into the round components with diameter sign but only on Plates

#2313 In Special shape plates with the udf "PLATE" dimensions "L1, L2, W1,W2" negative values are not allowed

#2298 Knot id can be occur twice

#2296 End Component offset is set incorrectly if start component is changed with counterbore

#2294 Components cannot be deleted if they are not include in DrawWaterline SimpRep

#2293 Problem occurs during while finding intersections via surface ids

#2291 If Cooling Components in subassemlby cannot be deleted through Draw Waterline Feature

#2288 Draw Waterline Components are stored int the Start-In Directory

#2287 Hasco Z811 | Nipple Fails

#2286 Cannot add Blind Holes to modified Ejector Leader Pins

#2285 Some components do not take on the moldbase supplier

#2282 The Ejector Screw FH placed in the Moldbase Definition gets a gap below the head, as it had a washer

#2280 The Predefined screws of the meusburger Side Interlock are not working

#2279 "Use as core pin" does not work as expected

#2278 "Assemble Again" and "Assemble as Copy" don't work as expected

#2277 E1200_ |Socket Head Cap Screw fails

#2276 MAX_EPIN_NUMBER changes when modifying an ejector

#2272 Cannot modify predefined component groups after deleting them in the project

#2271 AUTO_SAVE_LAST_COMP doesn't work on DrawWaterlines

#2270 Cooling Component of drawWaterline Feature get different names

#2269 The command Hide does not work well with the Draw Waterline feature

#2266 Cooling Components of Draw Waterline go to main assembly tree

#2264 The LOCATING_CUT depth for all hasco-sizes was set to "4.05" by accident

#2253 Not Initialized variables cause trouble in Release compilation

#2251 RefGroup features of waterline component are supressed when inlets are iterateted through list dialog

#2250 DrawWaterline: Intersection with waterlines and surfaces does not work in components with different transformation matrix

#2247 In AllWaterlineList for vertical waterlines the component is show incorrectly

#2245 Vertical waterlines can not be placed if cooling bore solids are already assembled

#2244 Wrong computing of intersection between waterline and surface

#2239 When changing the length of a guide the diameter is reset to the first value

#2238 Hasco Z30_|Socket Head Cap Screw component > Z691 Spring washer has wrong values. When switching supplier, Creo crashes

#2226 When starting a waterline from the edge it is not possible to disable the inlets with the RMB

#2219 Use latest SHC80-dll for EMX-cd-image

#2212 SPR2263076 There is a redundant column after Size column in Bill of Materials dialog

#2210 Add ejector fixing plates and stripper plates as p-type in hasco all sizes

#2209 C12563641/Philips_Feature failed when assembling library component after applying specific EMX patch

#2202 Redefine all blade ejector UDFs with Radii to avoid regeneration errors if radii-references (edges) are missing

#2194 The dimensions UDF cool_thread_single doesn't match those frim the picture

#2160 If MATFILE_EXTENSION is "-" no material is listed in BOM vor Material-Parameter

#2149 When using cooling components from Commonspace (PDM_SYSTEM=2), cooling components show error message

#2148 Remove common component functions from RMB in partmode

#2147 ORD_NUMBER for plates when changing the thickness to a non catalog value does not update

#2113 Add Components: Hasco Z13 and Z58 and Meusburger E1513, E1121 and E1126

#2102 EMX doesn't allow to change the screw Length to a smaller value than the Reference

#2098 Creo Elements Direct Waterline Feature zum inspirieren lassen

#2096 Inconsistent behaviour when ejectors are created in an assembly on a multiple point feature

#2064 Consider Tubular Dowels in Component Status with Screws, no longer with Equipment

#2063 Tubular dowels do not create cutouts

#2062 When defining cooling comps in partmode in patterned insert assemblies, components are assembled multiple times

#2061 SPR2262003 The datum points belongs to moving half will also be showed when display fix half of moldbase

#2060 SPR 2262011 The library component will flip side when modify it

#2041 Crash when EMX ist stopped on 64bit machine with windows 7 and compoiling against Creo2 libraries

#2034 Some components from the ejector side are not added to the right simplified representation

#2033 Renaming project files cannot be done when the project prefix is missing

#2029 Thickness of IS-Insulation plates is not set at all in SetzeMasse()

#2014 Add tubular dowels from supplier Progressive

#2011 ProjectRename does not save MFG-assemblies made in Creo after the renaming was finished

#2009 When modifying the size of the moldbase and use Rails as P-Plates the distange of the rails to the middle is calculated incorrectly

#1979 C12369313: Change size of customized moldbase. Error "please erase *del_moldes" appears.

#1978 When modify an ejector pin the surafce reference for measuring thze offset to the point is missing. Wrong results when changing the point

#1931 SPR 2252369 Cannot display symbol of return pin on the drawing of moving clamp plate

#1926 SPR 2248437 Creo exit when modifying the plate thickness in Chinese version EMX

#1925 SPR 2245637 Ejector pin only works for one reference model if there are patterned reference model in mold assembly

#1924 SPR 2245416 Cutout on riser plate for leader pin will not be created if set the option "USE_ONE_MDL_RAIL" to "no"

#1903 Do not read component default from Roaming when chaning the component type in the dialog box.

#1902 SPR 2256341 Correct Measurement Point function in EMX

#1898 Incorrect calculation of clamping screw length when changing inch moldbase sizes

#1897 Drive feature conditions for clampslots in inch plates depending on the moldbase type

#1896 Instances and dimensions for DME-inch tubular dowels dont match the catalog

#1860 Missing columns in LHSCS-comp_data.txt of inch holokrome-screws

#1857 When changing nomdim values in the component dialog, the following DISABLED dimensions are not changing acordingly to the values set in the instance lines

#1856 Draw waterline feature - Assemble Components function doesn't load the pre saved CUT information like T5 depth

#1810 Check three plate extension bushings TEB-0001

#1809 SPR2251952 Cannot use inch screw & dowel pin in EMX 8.0 M020 and EMX 9.0 F000 Chinese version

#1807 C12348675 The cutout for library component cannot be created in some case.

#1806 SPR2256102 Unexpected behavior when adding shoulder screw

#1793 When assembling EMX components by using alternative partnames, the partnames are switched back to te standard names when changing moldbase sizes

#1792 When changing EMX option values these are only available after closing and reopening the Options dialog

#1788 Wrong plate types in strack 346x346

#1784 When assembling screws e.g. Meusburger E1200 angular to the plate the cuts are made only in the first plate

#1783 The EMX option DEFAULT_WATERLINE_OVERMEASURE doesn't work in EMX 9.0

#1782 C12394533-Philips Support Pillar issues

#1779 Remove unused DTM-planes in template ejector_.prt

#1776 Proper handling of Stop-Pattern type in Moldbase Editor

#1774 Hide the entry "diameter" in the pattern dialog box

#1767 Schraubenlänge ändern - Gewindetiefe wird nicht angepasst

#1755 List_example & customer of Bill of material are incorrect in EMX 9.0 F001 26.01.2015

#1754 When setting the LIBRARY_PATH Option to the mm folder not all folders underneath are visible

#1751 The option AUTO_SAVE_LAST_COMP=YES doesn't work

#1750 When assembling Insulation plates 1402, 1403, 1407 and 1408 from Meusburger the width and length are set to the first value 96x96

#1747 Allow the user to hide the annoying message "Model name already in use."

#1742 When EMX component assembled with alternative part name, the name of component is switched to the standard part name when changing Moldbase sizes

#1730 SPR2255032-Define customized moldbase, adding stop disc MH, the stop disc MH will be missing when re-load the customized moldbase

#1727 Some of the Meusburger plates have in the configuration the pryslot2 but this cannot be activated

#1726 In the Component Editor tab Asembly references the content of the option menu Constraint is switched with the content of the Option menu component reference

#1725 If customer renames the main assembly EMX doesn't find the correct subassemblies to move the components to

#1719 Handling parameters of new components was not consistent in UpdateParameterRelationViews

#1715 C12355550 The position and cut of screw cannot be updated automatically after change plate thickness

#1714 The naming of the Knarr blade ejectors is wrong because of missing entries in the partnames.cfg files

#1710 SPR2254462 Values for SIZE-Parameter becomes empty when open BOM dialog the second time

#1709 Movement of slider/lifter/latchlock in opening simulation is wrong when activating collision check

#1689 The varialbe GUIDE_PATTERN_OFFSET_INSTANCEx is not considered in Moldbase-Editor

#1682 Add warning if screw bore data is not found. Reason for the problem is for inch screws rounded nominal diameters that do not match comp_data-entries

#1671 After adding screws etc in EMX assemblies, circular references occur

#1665 SPR2252540 Unable to read ord_number specified in *.dat file for library component

#1663 SPR2252363 Unable to Save Position ID after re-ordering bill of material

#1661 file "bore_technology.cfg" gets corrupted when editing entries

#1606 Option menus in table of MultiCavity_Maske do not show all action icons

#1550 When using SAVE_LOCAL_PARAM_TO_ASM handling of the file project_parameter.cfg is wrong

#1493 When changing the offset of an component assembled in AUTO_SUB-assemblies, regenerate their owner automatically

#1492 The T5-depth of cooling bores is not stored when changing options. So it might become "0"

#1489 Equipment-offsets values are not stored properly in UpdateKomponente

#1387 Problem when reactivating inlets through list selection

#1386 Points and Datums of Reference Groups not on 00_BUW_DATUM

#1385 Highlight inlets in list also when selecting id or diameter

#1357 SPR 2228254 Copy drawings" will not be checked by default when define EMX component even the related drawing template exists in template directory

#1317 Drawing frame doesn't match plate size

#1310 During AddWaterline Function with collision control not enabled a waterline can not be drawn

#1309 Crash DrawWaterline while changing Component even if table of list Dialog is not allocated

#1298 Crash in Creo3 during moldbase loading process while Option NAME_SUBASM_COMP is set

#1294 Support Pillar Problems with orientation

#1293 For tubular dowel, transmission and top interlock: If check button no component: cutout are not assembled correctly

#1206 Error when renaming default names of assemblies in partnames.cfg

#1025 CUT_CB_DIA in guide comp_data.txt for Hasco Z10 and Meusburger E1100 are not correct

#969 C11753445/SPR2206765: The defined option value in comp_data doesn't work for customized moldbase.

#967 C11773419/SPR2206518: There are four screws locating on the side of S plate when the first time load the moldbase. How to disable the four screws?

#877 SPR2203934 In the Screw definition dialog of misumi/MSB(or MSBL), the picture for cut out will be disappear when double clicking any cut out dimension

#782 SPR2201018: Defined component display style cannot be saved after using preview function when defining EMX component

#757 Update material and density on all template models

#743 SPR2187285: Its not possible the define preload for a spring

#730 Cuts of components that hat been added to family table instances are not removed properly

#725 Provide measurement functions in library dialog box

#486 Improved handling when adding parameters in Emx Options

F002

15.08.2015

Enhancements

#2826 Modify Customer template for cavity plates

#2781 Shoulderscrew E1240 is missing from the Meusburger catalog

#2765 Improve assembly and cutouts of conic head ejector pins i.e. HASCO Z42

#1814 Better coaxial placement of angle pin E1032

#1630 Attach geometric tolerance information to the UDF dimensions in EMX which can be read by SMARTHolechart

F002

15.08.2015

Bugs

#2899 Check setting and usage of BUW_INCLUDE_IN_BOM-Parameter when modifying a part

#2892 ProCurrentWorkspaceGet is depracted and doesnot return the current workspace

#2888 SPR4805522: Unexpected behaviors for spring update

#2886 Enable show and hide of PRYSLOT feature

#2884 Hasco Z012: Detail Image is not perfect and Cutout-Data is wrong for Z012 and Z013

#2883 When working with auto-subassemblies and redefine components with RMB, they are not replaced properly

#2878 Check corepin cutouts in Fix half

#2865 Problem with DME cooling pipe plug BP in INCH

#2864 Trim ejectors does not work when using auto-subassemblies

#2856 Do not increase subasm_id for component subassemblies created with NAME_SUBASM_COMP-option

#2855 Save rename of components when declare a regular assembly as EMX assembly

#2846 When creating a 5/16 screws in EMX9.0 cut-out values are incorrect

#2822 When shorten a Meusburger Ejector E1700 the dimension I2 remains constant

#2819 Check why all SIZE-Parameters are unlocked in BOM-dialog box

#2808 PRYSLOT2 does not work on Cavity plates IS

#2806 Meusburger Baffles E2108 and E2109 have incorrect values

#2805 Meusburger E1110 has no slot in model, but in catalog

#2804 Simplified Representations do not work

#2803 PRYSLOTS2 Features on right sided risers are missing

#2802 Failure when inserting EX|Cyl Head Ejector Pin

#2800 "Use as core pin" does not work as expected

#2799 "Assemble Again" and "Assemble as Copy" don't work as expected - partially fixed

#2798 Screw and Guide holes change position

#2796 When creating a Spr. plunger from Meusburger (E1250) a counter bore is created as well

#2794 Clear all components from an EMX assembly doesn't remove all components

#2792 Meusburger Slider E3001 has wrong instances and placement constraints

#2789 Ejector Pin Modify: Crash of EMX if second orientation plane has wrong otientation

#2786 Plate Dialog: When changing part name in dialog during creation process -> Wrong listing in BOM Dialog, Parameters are not updated correctly

#2784 Cut from side interlocks dissapeared from the plate

#2783 BOM Entry is not correct for the meusburger ...s rails and ejector plates

#2782 The UDF copy_udf for MultiCavity does no longer work in Creo3

#2780 Hoist Rings Screw from Meusburger doesn't create any thread but thru hole

#2779 Meusburger Screws 1200 cannot be created

#2773 Ejector Pins: Modified Height in UDF-Picture and Modified height in solid cut out are different

#2767 Warning "qty_subasm_differs" shows up without any reason

#2746 When changing the Ejector diameter the note value is changed to the length from the order number

#2744 The screw holes pattern has an issue for the meusburger slider components E3176 and E3119

#2534 In Edit BOM Entry dialog set a parameter back to unlocked changes the value to default only after restarting dialog

#2515 Dimensions for the inch screws are not converted to the US format No1, No2 etc. when showing the drop down menu

#2299 Nominal dimensions defined in the Component editor cannot be changed afterwards when assembling the library component

#2297 When loading a moldbase defined with the supplier data meusburger_2008 the system switches the supplier to hasco when trying to edit a component from the Moldbase definition dialog with the RMB

#2292 Components are not set correctly on the simplified representations

#2103 When changing reference offset of cavity plates, clamping screw length is calculated wrong

#2084 When editing an old EMX 7.0 cooling component (e.g. Hasco Z81) with the EMX 8.0 version the Cut is not identified properly

#870 SPR2204812: After changing the assemble reference when modifying library component, the modification doesn't work while preview is correct

F001

14.07.2015

Enhancements

#2269 The command Hide does not work well with the Draw Waterline feature

#2230 Draw Waterlines: Avoid deleting of cooling components and features

#2226 When starting a waterline from the edge it is not possible to disable the inlets with the RMB

#2382 Following HASCO components were checked and updated Z10, Z1000, Z1000W, Z11, Z1100W

#2345 Add Meusburger latchlock E1820 to the EMX database

#2340 Add Meusburger latchlock E2071 to the EMX database

#2336 The angled pin used for the slider doesn't follow the direction of the selected axis but the direction of the placement surface

#2265 Hasco clamping plates K10 have the locating depth cut dimension set on 4.05 and this should be 4.0

#2210 Add ejector fixing plates and stripper plates as p-type in hasco all sizes

#2202 Redefine all blade ejector UDFs with Radii to avoid regeneration errors if radii-references (edges) are missing

#2189 Add DRAFT to the COOL_ORING_BORE and COOL_ORING_CB UDFs according to HASCO settings.

#2188 Knarr Ejector pins are missing the options AUTO_LENGTH and AS_COREPIN

#2166 Meusburger corepin plates are missing

#2073 All assemblies should be hidden in BOM when switching the config option EMX_HIDE_ASSEMBLIES_IN_BOM to YES

#2064 Consider Tubular Dowels in Component Status with Screws, no longer with Equipment

#2060 The library component will flip side when modify it with a negative value

#2014 Add tubular dowels from supplier Progressive

#1963 Assemble new components when the reference sketched point was manually updated

#1931 Cannot display symbol of return pin on the drawing of moving clamp plate

#1846 Meusburger guide component E1060 is not available when trying to assemble ejector guidance from Moldbase Definition Dialog

#1821 Assemble Component and cuts near to a selected contour

#1820 Allow the screws to be assembled normal to the thread surface

#1818 Allow the user to remove the prefix from the options and create a project only with postfix

#1814 Slider pin E1032 cannot be assembled on an angled axis

#1810 Check three plate extension bushings TEB-0001

#1791 Improve the user experience within the technology color dialog

#1779 Remove unused DTM-planes in template ejector_.prt

#1760 Meusburger cooling plug E2072 is missing some diameter values

#1752 Add missing TEB0001-component

#1749 The patterns in the insulation plates 1402, 1403, 1407 and 1408 for guide and screw cuts are incorrect

#1747 Allow the user to hide the annoying message "Model name already in use."

#1727 Some of the meusburger plates have in the configuration the pryslot2 but this cannot be activated

#1724 Check important config.pro option during EMX startup and print warning if values affect EMX

#1721 Hole diameter for UDF ejp_cb_fix1_2 is not available as a parameter

#1718 Show radii of ejector pins and their placement angle in preview

#1687 Meusburger plates material settings are missing the proper materials from the materials folder

#1685 Insulation plates have white edges when assembled in Creo 2.0 and are not visible

#1635 When modifying a component and the new name exist in session use existing model

#1421 Add new column for plate feature tolerances in feature_data.txt

#1415 Plate F080 from Meusburger lacks the pry slots information

#1409 Remove check mark for the setting "Keep size and model data" to avoid loading the false moldbases

#1402 Improving user experience in the Library assemble dialog

#1367 Update wear plates E3024, E3026, E3030, E3027, E3032, E3034 from Meusburger in the EMX catalog

#1290 In the classification dialog, the two checkboxes at the bottom of the dialog are not persistent

#1289 When starting a new project the opening sequence ends in the MODEL tab rather than the EMX GENERAL tab

#1285 Entries for bore_cooling.cfg are missing

#1247 Activate the "Copy Drawings" option also when a drawing with the instance name of the current component is present in the template folder

#1246 Create a new config option to define for which components should have the create drawing option selected when the drawing exists

#1240 Remove warning if configuration/templates/view_layer_template was not found

#1239 Show in BOM Drawing symbols in drawing mode too, and show the proper symbol when the ballon is missing

#1233 Implement Fibro standard parts 202.21, 2021.46, 2051.32, 206.71, 206.72, 2061.44 into the EMX database

#1215 Improve usage of ejector pin sketches in predefine mode

#1179 Predefine reference pattern for custom component

#1040 Due to the setting of NR_DIGITS_COMMON I save the bore-files commonly with 3 digits ... for inch parts this is not enough, so the bore data i.e. for screws is not read properly

#1036 Unable to add user-defined parameter in EMX Bill of Material.

#1015 Enable placement of balloons with different arrow end options

#895 Allow placement of angled components (right now the cuts are still defined normal to the plane!)

#875 Is it possible to add option "toggle direction" for library component?

#783 For all threads in EMX the selected nominal value should be written as text in the dialog

#759 Add a button "Save Instance" to the Library Component Dialog to be able to save the current settings into the *.dat file

#743 Its not possible the define preload for a spring

F001

14.07.2015

Bugs

#2393 Draw Waterline crashes if referenced surfaces of components are not in model any more

2392 DrawWaterline: Offset für Kühlungsbohrspitze wird nicht übernommen

2386 DEFAULT_WATERLINE_DIA_LABEL cannot be modified in emx_options.cfg

2335 Creo 3.0 Drawings and Reports are not saved to the disk after loaded

2288 Draw Waterline Components are stored int the Start-In Directory

2266 Cooling Components of Draw Waterline go to main assembly tree

2087 After adding a new waterline with the new tool the current working directory is changed.

1856 Draw waterline feature - Assemble Components function doesn't load the pre saved CUT information like T5 depth

1783 The EMX option DEFAULT_WATERLINE_OVERMEASURE doesn't work in EMX 9.0

1432 Crash when closing the new WaterLine dialog on a non EMX assembly

1368 EMX 9.0 crashes on localized Creo

#2424 When clicking on the column with the model name in the BOM the lines are not correctly sorted

#2423 When retrieving stored moldbases, dont modify instances for guide components with wrong inner dia

#2410 For specific components the outline size is calculated differently in the BOM dialog and in the Model Size dialog

#2403 Cannot retrieve a Moldbase receipt in Creo3

#2402 Check behaviour for 3+1 guides when loading meusburger type1 moldbase

#2397 Plate Materials are not read from file plate_material.txt. And when they are read, the material is set to the first element in the list even if the current plate material exists in the list

#2391 Component with no udfs hide the udf dims table and picture

#2357 In the nominal dimension table of component dialog preselection of instances in 2nd pulldown does not work if 1st pulldown contains a string

#2347 When using &user_number default value for an EMX parameter, the plates are getting the size value instead of the predefined user number

#2334 If you edit a plate dimension value, either to insert or delete a digit of the value, the cursor jumps to the end of the value

#2326 For the meusburger ejector E1700 the cut is not correct

#2324 Cutouts for inch DME EX-ejector have wrong references

#2323 Dimensions in Library Components with same names of ASM and PRT that are changed via EDIT Fileds are not set correctly in model

#2313 In Special shape plates with the udf "PLATE" dimensions "L1, L2, W1,W2" negative values are not allowed

#2310 For pedrotti rails the guide-cutouts are missing in the D-plate

#2300 Setting the L1 value of an meusburger Ejector ground plate to a negative value changes the Order Number of BOM to a wrong value

#2292 Components are not set correctly on the simplified representations

#2287 Hasco Z811 Nipple Fails when assembled

#2285 Some components do not take on the moldbase supplier

#2282 The Ejector Screw FH placed in the Moldbase Definition gets a gap below the head as it had a washer

#2280 The Predefined screws of the meusburger Side Interlock are not working

#2278 When using "Assemble Again" and "Assemble as Copy" the edited Hole informations are not caried to the new component.

#2277 E1200_ |Socket Head Cap Screw fails when assembled

#2276 MAX_EPIN_NUMBER changes when modifying an ejector

#2275 Cannot place Predefined Components in several Family Table instances

#2273 EMX cannot delete supressed groups from Family Table instances

#2272 Cannot modify predefined component groups after deleting them in the project

#2267 Return pins are not set correctly on the corresponding simpliefied representation

#2258 A certain library component can be regenerated in preview, but not in final assembly

#2243 When defining a new library component, the wildcard for partname is wrong

#2241 Screw with name <pre>_<instance> doesn't change the name when changing length

#2240 Screws are assembled on a point cloud - changing screw length doesnt update all screws

#2239 When changing the length of a guide the diameter is reset to the first value

#2235 Mousepick-points does not work properly

#2232 Define bores in insulation plates (guide and screw-pattern) also as pattern so they follow the pattern defined in moldbase definition

#2224 The flag "IsStandardpart" from partnames.cfg does not set the Flag in Components Dialog Box.

#2212 When running EMX in chinese korean or japanese language there is a redundant column after Size column in Bill of Materials dialog

#2205 Preview functionality doesn't work at the second time or the third time when assembling library component

#2194 The dimensions UDF cool_thread_single doesn't match those frim the picture

#2160 If MATFILE_EXTENSION is "-" no material is listed in BOM for Material-Parameter

#2157 Meusburger component E1100 doesn't work properly for lengths with free cut

#2154 When assembling cooling components on curves tangent to surfaces the cut is not created

#2153 When disassembling/assembling components through the component status dialog, parameter of the components are missing

#2152 Component cuts are not correctly colored if they have more than 2 diameters

#2149 When using cooling components from Commonspace (PDM_SYSTEM=2), cooling components show error message

#2148 Remove common component functions from RMB in partmode

#2147 ORD_NUMBER for plates when changing the thickness to a non catalog value does not update

#2145 Socket Head Cap Screw does not allow to change names

#2103 When changing the distance between plates, the length of the screws is also updated

#2102 EMX doesn't allow to change the screw Length to a smaller value than the Reference

#2096 Inconsinstent behaviour when ejectors are created in an assembly on a multiple point feature

#2091 When switching between suppliers, insulation plates width and length are reset to the first values

#2086 Plates are not getting the correct name when switching to the instance name

#2077 The Meusburger cooling E2110 is not working properly

#2065 When modifiying a component by changing e.g. length, the name of the component doesn't update accordingly when using the instance name

#2063 Tubular dowels dont create cutouts

#2062 When defining cooling comps in partmode in patterned insert assemblies, components are assembled multiple times

#2061 The datum points belongs to moving half will also be showed when display fix half of moldbase

#2033 Renaming project files cannot be done when the project prefix is missing

#2032 EMX crashes when trying to edit parameter with restricted values

#2021 Do not automatically set predefine flag for cooling comps when work in partmode

#2011 ProjectRename does not save MFG-assemblies made in Creo after the renaming was finished

#2009 When modifying the size of the moldbase and use Rails as P-Plates the distange of the rails to the middle is calculated incorrectly

#2008 When selecting a new component while holding the Edit BOM Entry Dialog open the dialog remains empty

#2007 Parameters without standard default value are not considered for autounlocking

#2006 Create Project Dialog is not resizable

#2005 Ejector pin Eberhard 6135 is not regenerating when assembling with a 3 mm diameter

#1979 Change size of customized moldbase. Error "please erase *del_models" appears.

#1978 When modify an ejector pin the surface reference for measuring the offset to the point is missing. Wrong results when changing the point

#1977 Make sure to not overwrite the name value with the standard name when this was changed manually and was saved into the parameter

#1966 When changing manually the parameter with default value &part_id the edited value is overwritten with the standard when the component is edited

#1950 After changing moldbase size the parameters from the modified components dissappear

#1925 Ejector pin only works for one reference model if there are patterned reference model in mold assembly

#1924 Cutout on riser plate for leader pin will not be created if set the option "USE_ONE_MDL_RAIL" to "no"

#1920 Drawing of the library assembly is not copied if this only contains the model with the same name and not the assembly

#1919 The Dimension EP_FIX_WIDTH is not set anymore to the value OFF from cut list dimensions

#1902 Correct Measurement Point function in EMX

#1898 Incorrect calculation of clamping screw length when changing inch moldbase sizes

#1897 Drive feature conditions for clampslots in inch plates depending on the moldbase type

#1896 Instances and dimensions for DME-inch tubular dowels dont match the catalog

#1891 When loading an EMX assembly from a recipe the plates are not renamed by using the rules from the partnames.cfg

#1860 Missing columns in LHSCS-comp_data.txt of inch holokrome-screws

#1857 When changing nomdim values in the component dialog, the following DISABLED dimensions are not changing acordingly to the values set in the instance lines

#1855 When the content of the environment variable EMX_USER_CONFIG_PATH exceeds 500 characters an error message is shown when starting EMX or the Option dialog

#1842 Drawing names of library parts must have the same case otherwise they will not be found

#1841 Meusburger slider wearplate assembly E3024 uses the old plate 3025

#1819 Ejector assemble with offset doesn't work properly

#1811 STRACK Z4310/10x100 cannot be assembled correctly

#1807 The cutout for library component cannot be created in some case.

#1806 Unexpected behavior when adding shoulder screw ISO7379

#1805 Clamping screw ES for Meusburger, size 496 x546 is placed 1mm under the counter bore

#1802 The picture for the HASCO component Z1100W is missing

#1801 Meusburger component E1040/18x140 cannot be assembled

#1800 Compression springs Z60 from HASCO cannot be assembled correctly

#1793 When assembling EMX components by using alternative partnames, the partnames are switched back to the standard names when changing moldbase sizes

#1792 When changing EMX option values these are only available after closing and reopening the Options dialog

#1788 Wrong plate types in strack 346x346

#1782 Support Pillar issues in the dme, dms, lkm and misumi catalogs

#1776 Proper handling of Stop-Pattern type in Moldbase Editor

#1770 When changing moldbase sizes the insulating plates are not updated

#1765 Ejector pins are not patterned on all modells when using several cavities

#1761 Hasco - insulating plate 296 x 346 x 8,5 cannot be assembled

#1751 The option AUTO_SAVE_LAST_COMP=YES doesn't work

#1750 When assembling Insulation plates 1402, 1403, 1407 and 1408 from Meusburger the width and length are set to the first value 96x96

#1742 When EMX component assembled with alternative part name, the name of component is switched to the standard part name when changing Moldbase sizes

#1730 Define customized moldbase, adding stop disc MH, the stop disc MH will be missing when re-load the customized moldbase

#1726 In the Component Editor tab Asembly references the content of the option menu Constraint is switched with the content of the Option menu component reference

#1725 If customer renames the main assembly EMX doesn't find the correct subassemblies to move the components to

#1715 The position and cut of screw cannot be updated automatically after change plate thickness

#1714 The naming of the Knarr blade ejectors is wrong because of missing entries in the partnames.cfg files

#1710 Values for SIZE-Parameter becomes empty when open BOM dialog the second time

#1709 Movement of slider/lifter/latchlock in opening simulation is wrong when activating collision check

#1692 When assembling a screw DIN912_88/10x16 the screw is assembled with a wrong offset

#1689 The varialbe GUIDE_PATTERN_OFFSET_INSTANCEx is not considered in Moldbase-Editor

#1686 Bore screw core diameter are smaller than in the standard

#1682 Add warning if screw bore data is not found. Reason for the problem is for inch screws rounded nominal diameters that do not match comp_data-entries

#1671 After adding screws etc in EMX assemblies, circular references occur

#1665 Unable to read ord_number specified in *.dat file for library component

#1663 Unable to Save Position ID after re-ordering bill of material

#1661 File "bore_technology.cfg" gets corrupted when editing entries

#1646 Cutouts and display for all shoulderscrews is wrong

#1607 When redefine predefined comps, the predefine-flag is not read from the refgroup

#1606 Option menus in table of Multi Cavity dialog do not show all action icons

#1551 When creating a new screw and switching the supplier, the offset keeps the value from 1st instance of the previous supplier

#1550 When using SAVE_LOCAL_PARAM_TO_ASM handling of the file project_parameter.cfg is wrong

#1505 Changed settings to the project parameters file in the working directory are not saved

#1503 Modified values don't remain save in Machine dialog box. It use to work till EMX 7

#1502 When using custom BOM translated names for the components the parameter values are deleted when opening the BOM dialog and saving the changes

#1501 guide SB57 | Straight Brush from the d-m-e inch Interferes with plate after inserting in Mold.

#1500 Thickness of insulation plates cannot be selected manually due to INSTANCE_DIM_SMALLER flag

#1495 Set the assembly coordinate system for the meusburger slider plates E3030 and E3024 to the correct position

#1493 When changing the offset of an component assembled in AUTO_SUB-assemblies, regenerate their owner automatically

#1492 The T5-depth of cooling bores is not stored when changing options. So it might become "0"

#1485 DME Inch Hoist ring screws SHR are assembled within the plate

#1481 When switching between Strack side Interlocks z.b. Z51-0 and Z51-2 the template for the second subassembly will not be updated

#1459 EMX crashes when trying to pattern already defined screw

#1435 When assembling Rails without Component they will not be displayed in the Moldbase definition Dialog

#1431 In the Cavity Pattern Dialog, the Values in the AZ columns of the pattern table doesn't support negative values

#1430 Ejector Guides E1325 and E1330 don't work properly

#1422 If cooling components are defined on multiple points, only the first component is assembled

#1410 If SAVE_LOCAL_PARAM_IN_ASM is set to yes, local parameters are written to the emx-assembly even user has unchecked the button "add local params"

#1404 Creo crashes when scaling the moldbase size during regeneration of the assembly.

#1403 When installing EMX 8.0 new, the first parameter list is not taken from the default text\emx_parameters.txt but from the emx_project_parameters.txt

#1400 Plate offsets of 4.1-moldbases are not considered properly in EMX7-EMX9

#1359 Crash in EMX 8.0 when opening the moldbasedefinition dialog on EMX 4.1 assemblies

#1357 Copy drawings" will not be checked by default when define EMX component even the related drawing template exists in template directory

#1356 Insulation plate will not update accordingly when changing modebase size

#1355 The quantity is not correct for predefined screw in a specific case

#1354 The prefix of part name doesn't follow the defined prefix of sub-assembly when adding component in sub-assembly

#1319 When trying to assemble the waterline as a model EMX brings the error "Cannot backup the template" and doesn't assemble the Waterline model.

#1295 Style State VIS0001 active when starting a new project

#1293 For tubular dowel, transmission and top interlock: If check button no component: cutout are not assembled correctly

#1291 In the Machine dialog, the Title PATTERN DIAMETER in the knockout pattern is at the wrong location

#1287 EMX crashes when "assembling as a copy" is used on inch slider

#1284 Crash when loading a moldbase recipe

#1276 Remove not only SURF-Copies for waterline model but also new solid features in regeneration

#1267 Crash when changing the supplier from Hasco to Meusburger when trying to update the guides and screws as well

#1252 When predefine ejector pins in partmode, read Project Short <pre> from the model

#1251 When assemble predefined components in subassemblies, do not search for DEFAULT refs if the subassembly is no EMX subassembly

#1245 Do not try to set material if EMX-Material-Parameter is "", "-" or "?"

#1241 It's not possible to enter more than one digit in the pattern dialog when the automatic recalculate button is selected

#1238 Additional cut will be added when define screw

#1225 Offset for LOCATING_AXIS is not set properly in the 3D-model (plates and skeleton axis)

#1210 Crash when assembling INCH locating rings

#1205 Change the reference selection icons in component dialog to avoid picture overlaping

#1196 Wrong udf picture displayed after editing udf_data for meusburger screws

#1195 Assembled components are not assembeled into their respective sub-asm but in the main asm

#1183 Library component parameters and trimmed ejector's NOTE parameter

#1162 Path to Configuration in Dialog is not shown correctly when EMX_USER_CCONFIG_PATH is set to a custom path

#1154 Inner diameter of Hasco Z98/ 7,5/ 1,5 O-Ring is wrong

#1150 EMX crashes when open a seccond time the option dialog

#1147 The value of DIM_OFFSET as a refgroup-parameter is not set properly for locating rings when retrieving a stored assembly

#1142 The predefined PART-ID for extracts in Classify Project is stored in wrong component parameter

#1114 Stored PCS-inch assemblies include wrong component instances, so warning: "Old format, please convert" appears

#1095 Hide and show components in the BOM doesn't work correctly for components with the same name

#1086 When assembling library components on CSYS patterns the components are assembled several times

#1080 Ejector Symbols in 2D drawing have always 1mm height

#1078 For mfgs with a family table, the feature might be supressed by family table. So resume it if required

#1064 Show and hide elements in BOM doesn't work properly for summarized parts

#1026 Deleting related drawing for plate under \components\mm\plates, then the plate cannot be load when loading moldbase assembly

#1025 CUT_CB_DIA in guide comp_data.txt for Hasco Z10 and Meusburger E1100 are not correct

#1023 Some components from dme euro (R18) and dme (SB) are not correct

#1018 Using "Pattern on all instances" to assemble customized Latchlock, some cutout will be missing if the instances of latchlock separately intersect different parts

#1016 The value of COOL_PITCH from EMX Options is not considered at all in EMX

#1013 Wrong dims for D-M-E moldbases for guide pattern

#1000 Cooling comps defined in subassemblies are assembled in the main assembly

#973 Creo exit when assembling a specific library component if clicking preview button before confirmation.

#971 Unable to define the default thread surface of clamp screw MH for moldbase, it always be the bottom surface of the plate which is the first one under parting surface.

#970 The defined relation in comp_data file only works when the first time component definition.

#969 The defined option value in comp_data doesn't work for customized moldbase.

#968 The Part Name for cavity and core doesn't following the defined one, also checking option "Rename Extracts" doesn't work when Classify project.

#967 There are four screws locating on the side of S plate when the first time load the moldbase. How to disable the four screws?

#935 New offset values are not displayed correctly after user has edited this field manually

#934 Pattern on all models assembles 4 UDFs instead of 2 when using a 2 sketched points

#932 Deleting library component, the predefined components defined within library component will not be deleted, and the related cut feature for predefined components will be failure

#922 Using "Assemble again" to assemble library component several times, then the predefined components located within the library component can only be assembled once.

#878 Assembling library component with partial constraint doesnt work properly

#877 In the Screw definition dialog of misumi/MSB(or MSBL), the picture for cut out will be disappear when double clicking any cut out dimension

#800 Predefined screws in part mode of library assemblies are added partially in the assembly and partially in the main assembly

#782 Defined component display style cannot be saved after using preview function when defining EMX component

#757 Some errors in the EMX 8.0 templates were corrected

#746 When setting a component as standard part in partnames.cfg, the setting is removed when choosing the assembly references

#739 Futaba FG-Moldbase dimensions are wrong

#738 When using Assemble as a copy for assemblies, the components get wrong partnames

#731 The machine plate FH is not updated after assembling an insulation plate

#730 Cuts of components that hat been added to family table instances are not removed properly

#725 Measure function from Component dialo should be also implemented in the library dialog

#721 EMX_REFPLANE_CAVITY_MH doesn't consider the offset of the plate

#715 Error with the dimension OFFSET_Y in slider assemblies corrected

#687 For trimmed ejectors the real LG1-Length must be kept and not changed to avoid wrong ordering numbers

F000

16.01.2015

First release of EMX 9.0

Enhancements

#1171 Predefine ejector pins with layout curve - Documentation

#1048 Create the Waterline system dynamically  - Documentation

#1173 Improve Component Editor for maintaining existing dat-files (EXCEL)

#1176 Ensure full Creo 3.0 compatibility for EMX 9.0

#1179 Predefine reference pattern for custom component

#1178 Implement a set of runners as library components to deliver in the official CD-Image

#1177 Implement a set of gates as library components to deliver in the official CD-Image

#1175 Automated testing for improving the quality for every release

#1172 Improve Performance when opening/closing Moldbase Definition

#452 The option Predefine components will be set with an extra check button and not through unchecking the options "No Cuts" and "No Component"